Distribution of elements in needles of Pinus massoniana (Lamb.) was uneven and affected by needle age

Macronutrients (P, S, K, Na, Mg, Ca), heavy metals (Fe, Zn, Mn, Cu, Pb, Cr, Ni, Cd,) and Al concentrations as well as values of Ca/Al in the tip, middle and base sections, and sheaths of current year and previous year needles of Pinus massoniana from Xiqiao Mountain were analyzed and the distribution patterns of those elements were compared. The results indicated that many elements were unevenly distributed among the different components of needles. Possible deficiency of P, K, Ca, Mn and Al toxicity occurred in needles under air pollution. Heavy metals may threaten the health of Masson pine. Needle sheaths were good places to look for particulate pollutants, in this case including Fe, Cu, Zn, Pb, Cr, Cd and Al.     

Seasonal variations in microcystin concentrations in Lake Taihu, China

An enzyme-limited immunosorbent assay (ELISA) was used to monitor spatial and temporal variation of microcystins (MCs) in Lake Taihu. MC concentrations were higher in summer and autumn than in other seasons. Maximal MC concentration was 15.6 mug L(-1). Compared to central Lake Taihu and Wuli Bay, Meiliang Bay had higher MC concentrations due to high biomass of Microcystis.     

Ambient air monitoring of PCDD/Fs and co-PCBs in Gyeonggi-do, Korea

We started the monitoring for PCDD/Fs in ambient air and soil in August 2001, and co-PCBs in January 2002. Decreasing of PCDD/Fs and co-PCBs levels in ambient air were observed. The higher PCDD/Fs levels were found in winter and lower in autumn. We found that the industrial incinerators influenced the PCDD/Fs levels in ambient air. In the 2,3,7,8-substituted PCDD/Fs concentration profiles, the three major congeners occupied 67% of the total mass. In case of co-PCBs, PCB#118, #105 and #77 were observed as the main congeners. Five cluster groups discriminated by ratio of four components, O(8)CDD, 1,2,3,4,6,7,8-H(7)CDD, 1,2,3,4,6,7,8-H(7)CDF and O(8)CDF, were obtained from HCA (hierarchical cluster analysis).     

家居室内设计及新进展的思考

在对传统室内设计基本观点阐述与理解的基础上分析其整体性、可持续发展,并着重探讨在物质文明和精神文明高度发展的今天,现代室内设计在个性化、自然性、现代性、艺术性等方面发展的新趋势.通过对现代室内设计特点和发展趋势的分析,创造出一个适合人们现代生活的理想空间.     

上流式多级厌氧反应器中厌氧颗粒污泥特性研究

高品质厌氧颗粒污泥是厌氧反应器实现高效、稳定运行的关键和基础.在实现上流式多级厌氧反应器(UMAR)处理木薯变性淀粉废水高效运行的基础上,对厌氧颗粒污泥的浓度分布、粒径分布、沉降速度、产甲垸活性,辅酶F420和生物相等作进一步的研究.根据在实验工艺条件下培养得到的厌氧颗粒污泥的性能,探讨厌氧颗粒污泥的可能形成机制.     

动态膜-生物反应器处理城市污水的运行特性研究

考察了孔径108μm左右的不锈钢丝网动态膜组件处理城市生活污水的特性,并研究了出水水头和曝气强度对动态膜泥饼层形成的影响.结果表明,稳定运行情况下出水平均浊度1.2NTU,COD平均去除率90%,NH<,3>-N平均去除率97%,与传统膜-生物反应器处理效果接近.同时发现,在20、40mm的出水水头下,动态膜运行初期膜通量衰减规律均符合泥饼阻力模型.     

沟渠式生物接触氧化法对有机物和氨氮的去除研究

生物接触氧化工艺是目前较为成熟的水质净化技术,国内外在河流水质净化、水体修复中都有较多的研究和应用.在实验室采用沟渠式生物接触氧化组合系统处理模拟村庄面源污水,较好地去除了有机物并实现氨氮转化.结果表明,当进水COD为130～290mg/L、氨氮为30～40mg/L、水力负荷为0.19～0.24m3/(m2·d)的条件下,该系统稳定运行11周,COD和氨氮的平均去除率分别达85%和79%.     

有毒气体危害区域划分之临界浓度标准研究

通过研究毒物伤害准则进而界定有毒气体危害浓度,对有毒气体泄漏扩散后的危害区域进行分级划分,以采取相应的防护措施,最大限度的即时有效的减轻有毒气体对人员的伤害.最后,以氯为例,对比其在不同伤害准则下危害区域划分临界浓度标准值,数值差别较大,因此在使用时应根据实际情况加以判断,选择最适当的标准来划分危害区域.     

生物絮凝剂MBFGA1预处理乳制品加工废水

用生物絮凝剂MBFGA1预处理乳制品加工废水（简称废水）。实验结果表明，废水处理的水力条件为：以150r／min的转速搅拌30S，再以30r／min的转速搅拌20min；MBFGA1的最佳加入量为15mg／L；废水pH为4．0时，MBFGA1对废水的絮凝处理效果最好；废水温度对浊度、COD去除率有一定的影响，在20～45℃时，废水浊度的去除率始终保持在85％以上；30℃时，COD去除率达到最大值65．0％。     

防灾预案研究

本文提出了防御灾害预案的五要素和逻辑结构,进而讨论了防灾预案的优化准则、制定程序等问题。