Growth and reproductive biology of the small penaeid shrimp Trachysalambria curvirostris in Tokyo Bay

We investigated the growth and reproductive biology of the penaeid shrimp Trachysalambria curvirostris in Tokyo Bay, Japan, by monthly bottom-trawl surveys from May 2002 to December 2004. We also examined oogenesis in T. curvirostris by histological observation of the ovary. Females grew faster and attained a larger body size for age than males. The growth rate was high in summer and low in winter and was likely to be associated with seasonal changes in water temperature. The carapace length (CL) at which 50% of females contained vitellogenic oocytes was estimated to be 17.0 mm. The reproductive season extended from May to October. Young-of-the-year appeared in October and could be traced across the months on CL histograms to the following September or October, indicating a 1-year life cycle. This extended reproductive season, together with our observation of asynchronous development of oocytes in the ovary, suggests that multiple spawning by individual females may occur during the reproductive season. Postovulated oocytes were not found among the samples we collected during the daytime, suggesting that final oocyte maturation and spawning occur at night. Cortical crypts in the cytoplasm of the oocyte, considered to be a general feature of oogenesis in penaeid shrimps, were not found in T. curvirostris, even in oocytes undergoing germinal vesicle breakdown. This result implies that the cortical reaction after spawning of T. curvirostris may be different from that of other penaeid shrimps.     

Correction to: Design considerations of constructed wetlands to reduce landfill leachate contamination in tropical regions

Journal of Material Cycles and Waste Management - In the original publication of the article, Eq. 5 was published incorrectly. The correct equation is given below.     

Responses of fish assemblage structures to sandy beach types in Kyushu Island, southern Japan

To determine differences in fish assemblage structures between beach morphodynamic types on an exposed sandy shore, three beach types (reflective, intermediate, and dissipative) were sampled at Fukiagehama Beach, Kyushu Island, southern Japan, in May, August, and November 2006 and 2007. Distinct differences in physical conditions and the amount of major prey invertebrates, such as copepods, mysids, and amphipods, were recognized between the three beach types. The reflective beach was characterized mainly by turbulent swashes, coarse sediment, and a low abundance of major prey invertebrates. In contrast, the dissipative beach was characterized mostly by benign swashes, fine sediment, and a high abundance of prey invertebrates. The intermediate beach tended toward an intermediate condition between the reflective and dissipative beaches. The fish assemblage structures also differed clearly between the three beach types, with species and individual numbers being greatest on the dissipative beach and lowest on the reflective beach. A similarity index indicated differences in species composition of the assemblages between the beach types. Such differences arose primarily from the differential distributions of two dominant trophic groups, zooplankton (mostly copepods) and epibenthic crustacean (mainly mysids and amphipods) feeders, between the beach types, both groups tending to increase in species and individual numbers from the reflective beach to the dissipative beach. In addition, the mean standard length of all fish collected in each month tended to decrease toward the dissipative beach. These results suggested that beach types strongly influence sandy beach fish assemblage structures.     

Heterogeneous Sulfate Formation on Dust Surface and Its Dependence on Mineralogy: Balloon-Borne Observations from Balloon-Borne Measurements in The Surface Atmosphere of Beijing, China

This study focuses on providing a direct insight into the process by which sulfate is formed on mineral dust surface in the actual atmosphere. Six sets of aerosol measurements were conducted in the outskirts of Beijing, China, in 2002–2003 using a tethered balloon. The mineralogy of individual dust particles, as well as its influence on the S (sulfur) loadings was investigated by SEM-EDX analysis of the directly collected particles. The mixed layer in the urban atmosphere was found to be quite low (500–600m), often appearing as a particle dense stagnant layer above the surface. It is suggested that mineral dust is a common and important fraction of the coarse particles in Beijing (35–68%), and that it is relatively enriched with Calcite (>28%). An exceptional amount of S was detected in the mineral particles, which can be explained neither by their original composition, nor by coagulation processes between the submicron sulfates and the dust. Heterogeneous uptake of gaseous SO₂, and its subsequent oxidation on dust was suggested as the main pathway that has actually taken place in the ambient environment. The mineral class found with the largest number of particles containing S was Calcite, followed by Dolomite, Clay, Amphibole etc., Feldspar, and Quartz. Among them, Calcite and Dolomite showed distinctly higher efficiency in collecting sulfate than the other types. A positive correlation was found with the number of S containing particles and the relative humidity. Calcite in particular, since almost all of its particles was found to contain S above 60% r.h. On the other hand, the active uptake of SO₂ by the carbonates was not suggested in the free troposphere downwind, and all the mineral classes exhibited similar S content. Relative humidity in the free troposphere was suggested as the key factor controlling the SO₂ uptake among the mineral types. In terms of sulfate loadings, the relationship was not linear, but rather increased exponentially as a function of relative humidity. The humidity-dependent uptake capacity of mineral types altogether showed an intermediate value of 0.07 gSO₄ ²⁻ g⁻¹ mineral at 30% r.h. and 0.40 gSO₄ ²⁻ g⁻¹ mineral at 80%, which is fairly consistent with laboratory experiments.     

Effect of phosphorus fluctuation caused by river water dilution in eutrophic lake on competition between blue-green alga Microcystis aeruginosa and diatom Cyclotella sp.

Tega-numa (Lake Tega) is one of the eutrophic lakes in Japan. For the improvement of water quality in Lake Tega, the Northchiba Water Conveyance Channel was constructed in 2000, which transfer water from Tone River into the lake. After 2000, the dominant species of diatoms, mainly Cyclotella sp., have been replacing blue-green algae, mainly Microcystis aeruginosa in Lake Tega. This transition of dominant species would be due to the dilution, but the detail mechanism has not been understood yet. This study examined the relationship between phosphorus fluctuation caused by river water dilution to Lake Tega and dominance of algal species, M. aeruginosa or Cyclotella sp. based on the single-species and the mixed-species culture experiments. The single-species culture experiment showed that the half-saturation constant and uptake rate of phosphorus were one order lower and seven times higher for M. aeruginosa than those for Cyclotella sp. These findings implied that M. aeruginosa would possess a potential for the growth and survival over Cyclotella sp. in the phosphorus limited condition. The superiority of M. aeruginosa was reflected in the outcome of the mixed-species culture experiment, i.e., dominance of M. aeruginosa, even phosphorus concentration was lowered to 0.01 mg-P/L. Therefore, it could be concluded that the decrease in phosphorus concentration due to the river water dilution to Lake Tega would be interpreted as a minor factor for the transition of dominant species from M. aeruginosa to Cyclotella sp.     

239+240Pu作为湖泊沉积物计年时标:以云南程海为例

在近代沉积作用领域137Cs时标与210Pb计年结合,获得了广泛而有效的应用.然而,137Cs经过两个半衰期的衰变已难于辩识.环境中的Pu核素具有相对较长的半衰期,也随全球大气扩散而散落于地球表面,可望作为沉积计年的时间标志.通过程海沉积物柱芯中239+240Pu比活度、240Pu/239Pu原子比率及校正到沉积年代的...     

Effects of whole spine alignment patterns on neck responses in rear end impact

Objective: The aim of this study was to investigate the whole spine alignment in automotive seated postures for both genders and the effects of the spinal alignment patterns on cervical vertebral motion in rear impact using a human finite element (FE) model.

Methods: Image data for 8 female and 7 male subjects in a seated posture acquired by an upright open magnetic resonance imaging (MRI) system were utilized. Spinal alignment was determined from the centers of the vertebrae and average spinal alignment patterns for both genders were estimated by multidimensional scaling (MDS). An occupant FE model of female average size (162 cm, 62 kg; the AF 50 size model) was developed by scaling THUMS AF 05. The average spinal alignment pattern for females was implemented in the model, and model validation was made with respect to female volunteer sled test data from rear end impacts. Thereafter, the average spinal alignment pattern for males and representative spinal alignments for all subjects were implemented in the validated female model, and additional FE simulations of the sled test were conducted to investigate effects of spinal alignment patterns on cervical vertebral motion.

Results: The estimated average spinal alignment pattern was slight kyphotic, or almost straight cervical and less-kyphotic thoracic spine for the females and lordotic cervical and more pronounced kyphotic thoracic spine for the males. The AF 50 size model with the female average spinal alignment exhibited spine straightening from upper thoracic vertebra level and showed larger intervertebral angular displacements in the cervical spine than the one with the male average spinal alignment.

Conclusions: The cervical spine alignment is continuous with the thoracic spine, and a trend of the relationship between cervical spine and thoracic spinal alignment was shown in this study. Simulation results suggested that variations in thoracic spinal alignment had a potential impact on cervical spine motion as well as cervical spinal alignment in rear end impact condition.     

Abundance, growth and life cycle of the mesopelagic amphipod Primno abyssalis (Hyperiidea: Phrosinidae) in the Oyashio region, western subarctic Pacific

Abundance and life-cycle features of the mesopelagic hyperiid amphipod Primno abyssalis (formerly P. macropa) in the Oyashio region, western subarctic Pacific, were investigated using samples collected between July 1996 and July 1998. P. abyssalis was collected throughout the entire survey period, with abundance peaks occurring in spring to autumn. While all maturity stages of males and females were observed throughout the study period, the peak reproduction season was in summer. Instar analysis based on the segment number of the pleopod rami indicated that hatched juveniles molted 10 times before becoming adult males and 13 times before becoming adult females. Judging from the dry and ash-free dry weights of each instar, males and females continued to feed throughout the final instar stage. Based on cohort analysis of seasonal samples and laboratory observations on molting frequencies, growth in body length of P. abyssalis was linear with time, and estimated generation lengths were 2.3-3.8 years for females and 1.4-1.9 years for males. Brood size of females ranged from 66 to 337 and increased with increasing female body length. Lifetime fecundity, calculated as the sum of six successive broods, was 1,004. Compared with P. abyssalis in the southern Sea of Japan, those in the Oyashio region have a larger number of adult instars (six versus five for females, three 3 vs one for males), a lower growth rate (0.014 mm day^-1 vs 0.021 mm day^-1), and mature earlier (instar 13 vs instar 15 for females; instar 10 vs instar 11 for males). These characteristics are considered to be advantageous life-history traits to counteract higher niche competition within the mesopelagic community and higher predation pressure by mesopelagic fishes in the Oyashio region than in the Sea of Japan.     

The influence of lower extremity postures on kinematics and injuries of cyclists in vehicle side collisions

Objective: A cyclist assumes various cyclic postures of the lower extremities while pushing the pedals in a rotary motion while pedaling. In order to protect cyclists in collisions, it is necessary to understand what influence these postures have on the global kinematics and injuries of the cyclist.

Method: Finite element (FE) analyses using models of a cyclist, bicycle, and car were conducted. In the simulations, the Total Human Model of Safety (THUMS) occupant model was employed as a cyclist, and the simulation was set up such that the cyclist was hit from its side by a car. Three representative postures of the lower extremities of the cyclist were examined, and the kinematics and injury risk of the cyclist were compared to those obtained by a pedestrian FE model. The risk of a lower extremity injury was assessed based on the knee shear displacement and the tibia bending moment.

Results: When the knee position of the cyclist was higher than the hood leading edge, the hood leading edge contacted the leg of the cyclist, and the pelvis slid over the hood top and the wrap-around distance (WAD) of the cyclist's head was large. The knee was shear loaded by the hood leading edge, and the anterior cruciate ligament (ACL) ruptured. The tibia bending moment was less than the injury threshold. When the cyclist's knee position was lower than the hood leading edge, the hood leading edge contacted the thigh of the cyclist, and the cyclist rotated with the femur as the pivot point about the hood leading edge. In this case, the head impact location of the cyclist against the car was comparable to that of the pedestrian collision. The knee shear displacement and the tibia bending moment were less than the injury thresholds.

Conclusion: The knee height of the cyclist relative to the hood leading edge affected the global kinematics and the head impact location against the car. The loading mode of the lower extremities was also dependent on the initial positions of the lower extremities relative to the car structures. In the foot up and front posture, the knee was loaded in a lateral shear direction by the hood leading edge and as a result the ACL ruptured. The bicycle frame and the struck-side lower extremity interacted and could influence the loadings on lower extremities.     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.