Development and validation of a method for evaluating temporary wooden guardrails built and installed on construction sites

Wooden guardrails are usually built and installed on construction sites to protect workers against falls. In this context, it is extremely difficult to verify whether they are safe and comply with existing regulations. The present study describes the development and validation of an evaluation method and a test protocol for verifying whether these wooden guardrails are safe and meet the requirements of the Québec Safety Code for the construction industry (S-2.1, r.6) in order to ensure that workers have adequate fall protection. This study shows that some wooden guardrails do not comply with S-2.1, r.6. The evaluation method and test protocol are reproducible and easily applicable on construction sites and can easily be adapted to international regulations.     

How good micro/macro ergonomics may improve resilience,but not necessarily safety

ContextProfessional sea fishing is among the world’s most variable (non-standardized) and dangerous sectors of activity. Because of this, it provides a remarkable model to study the complex links existing between resilience and safety. Paradoxically, even if the huge risks being run cause many shipwrecks (low safety level), studies show that these sailors avoid an even greater number of accidents thanks to their exceptional skill and know-how (remarkable resilience level). This article examines several ways of improving safety in an activity of this type.MethodTwo intervention strategies are tested: (i) a micro-ergonomics strategy offering conduct assistance guidelines based on accident analyses of the most serious and frequent causes (collisions while fishing); (ii) a macro-ergonomics strategy comparing the safety level of large firms having committed to a Total Quality approach, to that of smaller companies, often privately owned.ResultNeither of the two strategies works out as expected. The micro-ergonomics anti-collision assistance strategy is misused towards an increase of the fishing objective; the macro-ergonomics strategy is even more surprising: the largest firms suffer from a smaller number of shipwrecks, but a much greater number of work-related injuries; the strategy simply results in a minor shift of the sacrificial decision between performance and safety (loss of men vs. loss of vessels), while maintaining the same priority for financial performance.DiscussionThe article submits a simple modeling of the relationship between resilience and safety, and discusses the choice of strategies for safety-improving interventions, taking into account the system’s financial performance and the legal pressure to which it is subjected.     

Persistent organic pollutants associated to water fluxes and sedimentary processes in the Colorado River delta, Baja California, México

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were studied in sediment cores from two distinctive modern channels of the Colorado River (CR) delta. Their abundance and temporal changes are associated with flood-flows from the CR across the USA-Mexico border. The CR channel is directly exposed to river flood-flows while the Hardy River (HR) is a local channel derived mainly from agricultural runoff, geothermal effluents, and treated urban wastewater. Different headwater compositions and degrees of exposure to flood-flows appear to be the factors controlling the composition of persistent organic pollutants (POPs). Enrichment of OCPs (46 ng g⁻¹ dwt in HR and 4.37 ng g⁻¹ dwt in CR) occurred during or a few years after flooding. PCB-138 (4.2 ng g⁻¹ dwt) is enriched in HR suggesting its origin in dielectric oils from the geothermal power plant. PCB-28 (2.1 ng g⁻¹ dwt) in CR may be related with atmospheric input and/or re-deposition of upstream sediments. In surficial sediments (0-3 cm), only HR exceeds international sediment quality guidelines (4,4′-DDE = 8.16 ng g⁻¹ dwt and ΣDDT = 8.34 ng g⁻¹ dwt).     

Novel approach for assessing heavy metal pollution and ecotoxicological status of rivers by means of passive sampling methods

In order to study the pollution of fluvial ecosystems, it is necessary to analyze not only the levels of chemical contaminants in water, but also those accumulated in the sediment matrix, as well as to assess its ecotoxicological status. Eleven Catalan (Spain) river sections (one sampling point per river) located near urban and industrial areas were sampled during winter of 2009. Water pollutants were collected by using passive samplers as Diffusive Gradient in Thin-Films (DGTs) and Semi-Permeable Membrane Devices (SPMDs). Point water samples were also collected. The concentrations of potentially toxic elements (PTE) in water, filtered water, DGTs and sediment samples were analyzed. Aqueous and organic solvent extracts of sediments samples and organic extracts of SPMDs were performed to assess acute toxicity to Vibrio fischeri by Microtox(?), and chronic toxicity to the green alga Pseudokirschneriella subcapitata. Microtox(?) test was also performed with DGT extracts. The results show that metals content of Catalan river waters are below the freshwater screening US EPA benchmarks, excepting some industrial areas (for Hg, Pb, and Zn). In contrast, sediments levels of some rivers were far above freshwater sediment screening US EPA benchmarks (for Zn, As, Cr, Pb, Ni, Hg, and Mn), particularly in the most industrialized areas. A good correlation was found between toxicity values of extracts (from sediments and DGTs) and PTE levels in sediments. The current results support the suitability of using combined point and passive sampling methods for assessing the chemical and ecotoxicological status of aqueous environments.     

Assessment of the trophic status of four coastal lagoons and one estuarine delta, eastern Brazil

Anthropogenic eutrophication of aquatic ecosystems continues to be one of the major environmental issues worldwide and also of Brazil. Over the last five decades, several approaches have been proposed to discern the trophic state and the natural and cultural processes involved in eutrophication, including the multi-parameter Assessment of Estuarine Trophic Status (ASSETS) index model. This study applies ASSETS to four Brazilian lagoons (Mundaú, Manguaba, Guarapina, and Piratininga) and one estuarine delta (Paraíba do Sul River), set along the eastern Brazilian coast. The model combines three indices based on the pressure–state–response (PSR) approach to rank the trophic status and forecast the potential eutrophication of a system, to which a final ASSETS grade is established. The lagoons were classified as being eutrophic and highly susceptible to eutrophication, due primarily to their longer residence times but also their high nutrient input index. ASSETS classified the estuary of the Paraíba do Sul river with a low to moderate trophic state (e.g., largely mesotrophic) and low susceptibility to eutrophication. Its nutrient input index was high, but the natural high dilution and flushing potential driven by river flow mitigated the susceptibility to eutrophication. Eutrophication forecasting provided more favorable trends for the Mundaú and Manguaba lagoons and the Paraíba do Sul estuary, in view of the larger investments in wastewater treatment and remediation plans. The final ASSETS ranking system established the lagoons of Mundaú as “moderate,” Manguaba as “bad,” Guarapina as “poor,” and Piratininga as “bad,” whereas the Paraíba do Sul River Estuary was “good.”     

Physical and chemical characteristics of water from the hydrographic basin of the Poxim River, Sergipe State, Brazil

The Poxim River is one of Sergipe State’s major waterways. It supplies water to the State capital, Aracaju, but is threatened by urban and agricultural developments that compromise both the quantity and the quality of the water. This has direct impacts on the daily lives of the region’s population. In this work, a multivariate analytical approach was used to investigate the physical and chemical characteristics of the water in the river basin. Four sampling campaigns were undertaken, in November 2005, and in February, May, and September 2006, at 15 sites distributed along the Poxim. The parameters analyzed were conductivity, turbidity, color, total dissolved solids, dissolved oxygen, alkalinity, hardness, chlorophyll-a, and nutrients (total phosphorus, dissolved orthophosphate, nitrite, nitrate, ammoniacal nitrogen, and total nitrogen). Dissolved oxygen contents were very low in the Poxim-Açu River (1.0–2.8), the Poxim River (1.6–4.6), and the estuarine region (1.7–5.1), due to the dumping of wastes and discharges of domestic and industrial effluents containing organic matter into fluvial and estuarine regions of the Poxim. Factor analysis identified five components that were indicative of the quality of the water, and that explained 81.73 % of the total variance.     

Evaluating the ecological integrity of Atlantic forest remnants by using rapid ecological assessment

The need for quick identification of priority areas for biodiversity protection makes rapid assessment methods important management tools for defining conservation strategies. An increasingly used rapid assessment method is rapid ecological assessment (REA), a fast and flexible survey directed toward selected indicator species and vegetation forms. The purpose of this study was to propose and test REA based on plant community features of the semideciduous Atlantic forest (SAF). Correlation tests were performed between data collected by REA and plant species diversity, richness, and abundance collected by conventional woody plant inventory methods. The study was conducted in 21 SAF patches in Northern Paraná State, Brazil. The phytosociological inventory was conducted along a single transect and required 2 days to complete (excluding time spent for herbarium identification), whereas REA was conducted along three to four transects per working day. REA results correlated positively with woody plant diversity, proving REA to be an efficient method for defining the conservation status of SAF fragments, but accuracy of evaluations of threats to biological integrity are relatively low. Both the selection of appropriate variables and the skill level of field staff are critical and can strongly influence REA results.     

A tiered procedure for assessing the formation of biotransformation products of pharmaceuticals and biocides during activated sludge treatment

Upon partial degradation of polar organic micropollutants during activated sludge treatment, transformation products (TPs) may be formed that enter the aquatic environment in the treated effluent. However, TPs are rarely considered in prospective environmental risk assessments of wastewater-relevant compound classes such as pharmaceuticals and biocides. Here, we suggest and evaluate a tiered procedure, which includes a fast initial screening step based on high resolution tandem mass spectrometry (HR-MS/MS) and a subsequent confirmatory quantitative analysis, that should facilitate consideration of TPs formed during activated sludge treatment in the exposure assessment of micropollutants. At the first tier, potential biotransformation product structures of seven pharmaceuticals (atenolol, bezafibrate, ketoprofen, metoprolol, ranitidine, valsartan, and venlafaxine) and one biocide (carbendazim) were assembled using computer-based biotransformation pathway prediction and known human metabolites. These target structures were screened for in sludge-seeded batch reactors using HR-MS/MS. The 12 TPs found to form in the batch experiments were then searched for in the effluents of two full-scale, municipal wastewater treatment plants (WWTPs) to confirm the environmental representativeness of this first tier. At the second tier, experiments with the same sludge-seeded batch reactors were carried out to acquire kinetic data for major TPs that were then used as input parameters into a cascaded steady-state completely-stirred tank reactor (CSTR) model for predicting TP effluent concentrations. Predicted effluent concentrations of four parent compounds and their three major TPs were corroborated by comparison to 3-day average influent and secondary effluent mass flows from one municipal WWTP. CSTR model-predicted secondary effluent mass flows agreed within a factor of two with measured mass flows and confidence intervals of predicted and measured mass flows overlapped in all cases. The observed agreement suggests that the combination of batch-determined transformation kinetics with a simple WWTP model may be suitable for estimating aquatic exposure to TPs formed during activated sludge treatment. Overall, we recommend the tiered procedure as a realistic and cost-effective approach to include consideration of TPs of wastewater-relevant compounds into exposure assessment in the context of prospective chemical risk assessment.     

Ranking potential impacts of priority and emerging pollutants in urban wastewater through life cycle impact assessment

Life cycle impact assessment (LCIA), a feature of the Life cycle assessment (LCA) methodology, is used in this work outside the LCA framework, as a means to quantify the potential environmental impacts on ecotoxicity and human toxicity of wastewater containing priority and emerging pollutants. In order to do this, so-called characterisation factors are obtained for 98 frequently detected pollutants, using two characterisation models, EDIP97 and USES-LCA. The applicability of this methodology is shown in a case study in which wastewater influent and effluent samples from a Spanish wastewater treatment plant located in the Mediterranean coast were analysed. Characterisation factors were applied to the average concentration of each pollutant, obtaining impact scores for different scenarios: discharging wastewater to aquatic recipient, and using it for crop irrigation. The results show that treated wastewater involves a substantially lower environmental impact when compared to the influent, and pharmaceuticals and personal care products (PPCPs) are very important contributors to toxicity in this wastewater. Ciprofloxacin, fluoxetine, and nicotine constitute the main PPCPs of concern in this case study, while 2,3,7,8-TCDD, Nickel, and hexachlorobenzene are the priority pollutants with highest contribution. Nevertheless, it must be stressed that the new characterisation factors are based on very limited data, especially with regard to toxicology, and therefore they must be seen as a first screening to be improved in the future when more and higher quality data is available.