In Situ flushing of contaminated soils from a refinery: Organic compounds and metal removals

This article demonstrates the applicability of in situ flushing for the remediation of soil contaminated with petroleum hydrocarbons at a Mexican refinery. The initial average total petroleum hydrocarbon (TPH) concentration for the demonstration field test was 55,156 g/kg. After six weeks of in situ flushing with alternate periods of water and water/surfactant, an average concentration of 1,407 mg/kg was reached, achieving a total removal efficiency of 98 percent. At the end of the process, no hydrocarbons such as diesel; gasoline; benzene, toluene, ethyl benzene, and xylene (BTEX); or petroleum aromatic hydrocarbons (PAHs) were found. Iron washing achieved a removal efficiency of 70 percent, and for vanadium, the removal efficiency was 94.4 percent. The volume of soil treated was 41.6 m³ (38 m²), equivalent to 69.5 tons of soil. A rough calculation of the process costs estimated a total cost of $104.20/m³ ($114.00/m²). Our research indicates that there are a few studies demonstrating in situ flushing experiences under field conditions where both organic (TPH, diesel, gasoline, PAHs, BTEX) and metal (iron and vanadium) removals are reported. © 2004 Wiley Periodicals, Inc.     

Trisomy 2 due to a 3:1 segregation in an abortion studied by QF-PCR and CGH

Balanced reciprocal translocation is one of the known causes of recurrent spontaneous abortions. Cytogenetic studies of unbalanced miscarriages are difficult due to the growth failure of early loss and usually macerated abortions. We present a molecular study of an abortion in which the father carries a balanced reciprocal translocation t(2;17)(q32.1;q24.3) using QF-PCR and CGH techniques. DNA analysis showed the presence of a trisomy 2 due to a 3:1 interchange segregation. Recombinant events could also be investigated by comparing DNA samples from the family. We propose QF-PCR in addition to CGH as an efficient diagnostic method to improve our knowledge of unbalanced offspring in balanced translocation carriers. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of temperature and organic nutrients on the biodegradation of linear alkylbenzene sulfonate (LAS) during the composting of anaerobically digested sludge from a wastewater treatment plant

Limits on the application of biosolids (anaerobically processed sludges from wastewater treatment plants) as fertilizers for the amendment of soil are becoming greater because of the accumulation of recalcitrant substances, making necessary the use of techniques that bring the concentration of xenobiotics to lower concentrations than those permitted. In general, the biosolids composting process is sufficient to reduce the usual concentration of linear alkylbenzene sulfonates (LAS) to low levels. In this work, an assessment is made on the effect of temperature in the capacity of enriched bacterial populations to biodegrade LAS, together with the influence that the available nutrients may have in the biodegradation of these compounds. The results show that the microbial metabolism of LAS was not observed in the thermophilic range. The optimum temperature for the biodegradation of LAS appears to be around 40 degrees C, this is, the lowest assayed here, and at this temperature the differences in the biodegradation of LAS among the nutritionally supplemented cultures are small.     

Mineralization of the biocide chloroxylenol by electrochemical advanced oxidation processes

Electrochemical advanced oxidation processes (EAOPs) are environmentally friendly methods based on the destruction of organic pollutants in wastewaters with in situ electrogenerated hydroxyl radical. This species is formed in anodic oxidation (AO) from water oxidation at the anode and in indirect electro-oxidation methods like electro-Fenton (EF) and photoelectro-Fenton (PEF) also from reaction between catalytic Fe2+ and H2O2 continuously produced at the O2-diffusion cathode. The PEF method involves the irradiation of the treated solution with UVA light to enhance the photolysis of organics including Fe(III) complexes. In this work, the oxidation power of such EAOPs to decontaminate synthetic wastewaters of the biocide chloroxylenol (4-chloro-3,5-dimethylphenol) at pH 3.0 is comparatively examined with an undivided electrolytic cell containing a Pt or boron-doped diamond (BDD) anode and a stainless steel or O2-diffusion cathode. The initial chlorine is released as Cl(-) ion, which remains stable in the medium using Pt or is oxidized to Cl2 on BDD. The biocide solutions can be completely decontaminated using AO with a BDD anode, as well as PEF with a Pt or BDD anode. The PEF procedure with a BDD anode is the most powerful method leading to total mineralization in about 300 min, practically independent of current density. When current density rises, the degradation rate of processes increases, but they become less efficient due to the larger enhancement of waste reactions of oxidants. Chloroxylenol is much more rapidly removed in EF and PEF than in AO. 2,6-dimethylhydroquinone, 2,6-dimethyl-p-benzoquinone and 3,5-dimethyl-2-hydroxy-p-benzoquinone are identified as aromatic by-products, and maleic, malonic, pyruvic, acetic and oxalic acids are found as generated carboxylic acids. A general pathway for chloroxylenol mineralization by all EAOPs including the above by-products is proposed.     

Organochlorine contaminants in hair of adolescents from Iassy, Romania

Human hair samples (n=42) from Iassy county (Eastern Romania) collected in 2002-2003 from adolescents were analyzed for hexachlorocyclohexane (HCH) isomers, p,p'-DDT and its metabolites, hexachlorobenzene (HCB), chlordane and metabolites and 5 polychlorinated biphenyl (PCB) congeners. Very low levels were found for HCB and oxychlordane (0.8 and 2.5 ng g(-1)) indicating a low usage of these pesticide formulations in the studied area. In case of HCHs, gamma-HCH isomer was measured at higher median concentrations (79 ng g(-1) hair) compared to the beta-HCH isomer (55 ng g(-1)), which generally is the most prevalent from HCHs. The DDTs profile consisted in p,p'-DDE and p,p'-DDT which levels correspond to 81% of sum DDTs. Very high median concentrations measured for p,p'-DDT (192 ng g(-1)) combined with lower values for p,p'-DDE/p,p'-DDT of 0.4 (from 0.20 to 2.0) in all hair samples suggest recent exposure to "fresh" DDT. When gender was considered, significantly higher concentrations for most of the investigated contaminants were found in girls hair compared to boys. Very high levels were found in the present study for HCHs and DDTs compared to samples from Greece, Western Europe and China. In case of PCBs, the levels found in Romanian samples were found to be in the same range compared to other previously published data.     

Trace Element Contaminants in Sediments From the Noaa National Status and Trends Programme Compared to Data From Throughout the World

The National Oceanic and Atmospheric Administration's (NOAA) National Status and Trends (NS&T) Programme has analyzed samples of surface sediment collected at almost 300 coastal and estuarine sites throughout the United States since 1984. the overall distributions for concentrations of each element are approximately lognormal allowing a definition of geometric means and of “high” concentrations as those exceeding the mean plus one standard deviation of the lognormal distribution. Those mean and “high” concentrations should be useful for comparing the NS&T data set and with other reports on sediment contamination. A world-wide data set, constructed from data in the literature, was summarized in an identical manner. It was found, after excluding locally extreme values, that the NS&T and world-wide data sets yielded very similar mean and “high” concentrations for Cu, Ni, Pb and Zn. Chromium was the sole element showing higher summary statistics in the NS&T data set, a result attributed to NS&T sampling in areas of naturally (not contaminated) elevated Cr content. It remains undetermined, however, why the world-wide data set, even with exclusion of “hot spots”, yielded higher means and “highs” for Cd, Hg, As, and Ag.     

Decolourization of synthetic dyes by Trametes hirsuta in expanded-bed reactors

The present paper studies the decolourization of different synthetic dyes (Indigo Carmine, Bromophenol Blue, Methyl Orange and Poly R-478) by the white-rot fungus Trametes hirsuta at bioreactor scale under solid-state conditions, operating with ground orange peelings as a support-substrate. Dye decolourization was performed in both batch and continuous mode. Batch cultivation led to high decolourization percentages in a short time (100% for Indigo Carmine in 3h and 85% for Bromophenol Blue in 7 h). As for continuous cultivation, different hydraulic retention times (HRT) were studied (0.8, 1, 1.5 and 3d). The highest decolourization percentages were obtained operating at a HRT of 3d, especially for the dyes Methyl Orange and Poly R-478 (81.4% and 46.9%, respectively). This is a very interesting result, since there are few studies dealing with the continuous decolourization of dyes at bioreactor scale by fungal laccases.     

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.     

Coupling of 2,4,6-trinitrotoluene (TNT) metabolites onto humic monomers by a new laccase from Trametes modesta

During degradation of trinitrotoluene (TNT) by Trametes modesta, addition of humic monomers prevented the accumulation of all major stable TNT metabolites (aminodinitrotoluenes [AMDNT]) by at least 92% in the presence of 200 mM ferulic acid and guaiacol. Acute toxicity tests with individual TNT metabolites and in T. modesta cultures supplemented with 200 microM TNT demonstrated that the TNT biodegradation process lead to less toxic metabolites. Toxicity decreased in the order TNT>4-HADNT (4-hydroxylaminodinitrotoluene)>2-HADNT>2,6-DNT (2,6-dinitrotoluene)>2',2',6,6-azoxytetranitrotoluene>4-AMDNT>2-AMDNT>2,4-diamninonitrotoluene (2,4-DAMNT) while 2,4-DNT and 2,6-DAMNT were the least toxic. Ferulic acid is the best candidate for immobilization TNT biodegradation metabolites since it prevented the accumulation of AMDNTs in cultures during TNT biodegradation and its products were less toxic. All humic monomers were very effective in immobilizing 2-HADNT [100%], 4-HADNT [100%] and 2,2,6,6-azoxytetranitrotoluene [100%]. Two distinct laccase isoenzymes (LTM1 and LTM2) potentially involved in immobilization of TNT degradation products were purified to electrophoretic homogeneity. LTM1 and LTM2 have molecular weights of 77.6 and 52.5 kDa, are 18% and 24% glycosylated, have pI values of 3.6 and 4.2, respectively. Both enzymes oxidized all the typical laccase substrates tested. LTM1 showed highest kinetic constants (K(m)=0.03 microM; K(cat)=8.8 4x 10(7)s(-1)) with syringaldazine as substrate.     

Levels and distribution of organochlorine pesticides, polychlorinated biphenyls and polybrominated diphenyl ethers in sediments and biota from the Danube Delta, Romania

Concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs), such as dichlorodiphenyltrichloroethane (DDT) and analogues, hexachlorocyclohexanes (HCHs) and hexachlorobenzene (HCB), were measured in sediments and biota (invertebrates, 11 fish species and cormorant tissues) collected in 2001 from the Danube Delta, the biggest European wetland. DDTs were the predominant pollutants in all samples. A high variability in the concentrations of pollutants within the same species was observed and this was related to sampling location, age, length and sex. DDTs were also the main organohalogenated contaminants in cormorant muscle and liver, followed by PCBs, HCHs, HCB and PBDEs. The present levels of DDTs in cormorant tissues are lower than levels measured in cormorant eggs sampled from the Danube Delta in 1982 and 1997, respectively. The variance of delta15N for herbivores was much greater than for carnivores, while carp and bream showed higher delta15N signatures than expected, probably due to a higher dietary proportion of benthos, typically more delta15N enriched relative to pelagic biota.