Development, validation and application of a method to analyze phenols in water samples by solid phase micro extraction-gas chromatography-flame ionization detector

In this work the development, validation and application of method using Solid Phase Microexctration (SPME) for the analyses of five pollutants (phenol, 2-nitrophenol, 2,4-dimethylphenol, 2,4-dichlorophenol and 4-chloro, 3-methyl phenol) in supplying water, using gas chromatography (GC) with flame ionization detector (FID) is described. The optimal conditions obtained for SPME were: fiber type: Poliacrylate (PA); extraction time: 40 minutes; extraction temperature: 70 degrees C; amount of salt added to sample (NaCl): 15%; desorption temperature: 8 minutes. The parameters studied in the method validation were: limit of detection (0.3 and 3.5 microg.L(- 1)); precision, measured by the variation coefficient (between 2.1 and 8.8%); calibration curve and linearity, by using the external standardization method (between 1 and 50 50 microg.L(- 1)). After the methodology development, samples of water collected in Atibaia River (S?o Paulo - Brazil) were analyzed, using the optimized methodology. Three water samples collected in the rain season showed a peak with retention time close to 4-chloro, 3 methyl phenol further analyzed by Gas Chromatography-Mass Spectrometry for the identity confirmation. In spite of the fact that none target compounds were found in the river water samples analyzed, the presence of two phenols different from those investigated (p-terc butyl phenol; butylated hydroxytoluene) were detected. These results together with the results of the limit of detection (that showed to be lower than the maximum concentration of phenols demanded by different environment control agencies), and the results of the validation, indicate the applicability of this method for the analysis of selected phenols in river water samples.     

Calibration of lichen transplants considering faint memory effects

Biomonitoring, among other purposes, can be used as a tool to study the dispersion of trace elements through the atmosphere and back to the earth's surface again. In this sense it has been used for more than 20 years now. Yet, the calibration of biomonitors elemental contents against other atmospheric element dispersion variables like deposition or airborne concentration is still an open subject. The knowledge of a calibration nevertheless represents a qualitative improvement upon the use of biomonitors. Biomonitors elemental contents are usually assumed to depend in a linear way on the average values of atmospheric element dispersion variables, thus a linear regression is assumed to provide a good calibration. In this work: the element dispersion variables like deposition or airborne concentration will be referred in general as availability variables due to reasons that will be clarified; an uptake experiment using transplants of lichen Parmelia sulcata carried out in Portugal during a 2-year period (1994/1996) is described; and new concepts and calibration methods are presented. Lichen and aerosol samples were analysed by nuclear analytical techniques PIXE and INAA, and total deposition dry residue samples were analysed by ICP-MS. A database of roughly 70,000 values was thus created and biomonitor calibration carried out considering that biomonitors are not mechanical instruments but that they rather describe their exposure with a non-perfect memory. Data shows that surveying lichens four times within 1 year, with a period of 3 months in between sampling campaigns, allows the recovery of availability mean, maxima and standard deviation for many elements.     

Adenylic-derived indices and reburying time as indicators of the effects of dredging-induced stress on the clam<Emphasis Type="Italic"> Spisula solida</Emphasis>

Little attention has been given to the behavioural and physiological effects of dredging on clams. The response of the clam Spisula solida under stress imposed by dredging activity is analysed in terms of reburial time and two acute indices: AEC (adenylic energetic charge) and ATP per milligram dry weight. Stress on undersized (<25 mm) S. solida, due to habitat disturbance by dredging itself and subsequent aerial exposure was measured with in situ studies during September 1999 at Vilamoura, a bivalve sandy ground, off the southern coast of Portugal. The study showed significant increases in reburial time and a decrease in adenylic-derived indices of stressed bivalves compared with in situ control bivalves monitored by SCUBA divers. It was concluded that the stress caused by dredging affects the behavioural and physiological responses of S. solida. Moreover, the reburial time is an easy and valuable indicator of stress levels in the studied clam.     

Rheological and Mechanical Properties of Poly(lactic acid)/Bio-Based Polyethylene/Clay Biocomposites Containing Montmorillonite and Vermiculite Clays

Journal of Polymers and the Environment - This work aims to investigate the effect of organically modified montmorillonite (OMMT) and vermiculite (OVT) clays on the properties of poly(lactic acid)...     

Monogamy in large bee societies: a stingless paradox

High genetic diversity is important for the functioning of large insect societies. Across the social Hymenoptera (ants, bees, and wasps), species with the largest colonies tend to have a high colony-level genetic diversity resulting from multiple queens (polygyny) or queens that mate with multiple males (polyandry). Here we studied the genetic structure of Trigona spinipes, a stingless bee species with colonies an order of magnitude larger than those of polyandrous honeybees. Genotypes of adult workers and pupae from 43 nests distributed across three Brazilian biomes showed that T. spinipes colonies are usually headed by one singly mated queen. Apart from revealing a notable exception from the general incidence of high genetic diversity in large insect societies, our results reinforce previous findings suggesting the absence of polyandry in stingless bees and provide evidence against the sperm limitation hypothesis for the evolution of polyandry. Stingless bee species with large colonies, such as T. spinipes, thus seem promising study models to unravel alternative mechanisms to increase genetic diversity within colonies or understand the adaptive value of low genetic diversity in large insect societies.     

Kinetics of uranium uptake in soft water and the effect of body size,bioaccumulation and toxicity to Hyalella azteca

The kinetics of uptake and the effect of body size on uranium (U) bioaccumulation and toxicity to Hyalella azteca exposed to water-only U concentrations in soft water were evaluated. The effect of body size on U bioaccumulation was significant with a slope of ?0.35 between log body concentration and log body mass. A saturation kinetic model was satisfactory to describe the uptake rate, elimination rate and the effect of gut-clearance on size-corrected U bioaccumulation in H. azteca. The one-week lethal water concentrations causing 50% mortality for juvenile and adult H. azteca were 1100 and 4000 nmol U/L, respectively. The one-week lethal body concentration causing 50% mortality was 140 nmol U/g for juvenile H. azteca and 220 nmol U/g for adult H. azteca. One-week bioaccumulation studies that properly account for body-size and gut-clearance times can provide valuable data on U bioavailability and toxicity in the environment.     

Joining sheet panels to thin-walled tubular profiles by tube end forming

This paper is focused on novel utilizations of the fundamental modes of deformation of tube end forming for assembling sheet panels to thin-walled tubular profiles.The objective is to present an innovative and environmental friendly joining technology built upon the combination of compression beading with tube inversion that can successfully eliminate currently available technologies based on mechanical fixing with fasteners, welding and structural adhesive bonding. The technology works at room temperature, is capable of ensuring significant economic and time savings and offers potential for opening new markets for the assembly of lightweight frame structures.The presentation is supported by experimentation and numerical modelling based on independently determined mechanical properties of the materials with the purpose of characterizing and evaluating the process feasibility limits as a function of the major operative parameters.The feasibility of joining sheet panels to tubular profiles by means of the proposed technology is demonstrated by presenting industrial applications and by evaluating the performance of a safety auto part in an operation failure test.