Land Use and Food Intake of Future Inhabitants: Outlining a Representative Individual of the Most Exposed Group for Dose Assessment

The radiation doses to humans resulting from a potential release of radionuclides from a geological repository for long-lived waste are assessed over tens or even hundreds of thousands of years. Ingestion is expected to be the major exposure pathway, and the group with the highest exposures will be those that consume the most contaminated food. In this paper, we characterize the group of individuals with the highest exposures by considering the physical and biological characteristics of the contaminated area and human requirements for energy and nutrients. We then calculate intake rates based on land-use scenarios drawn from self-sustained communities spanning prehistoric times to an industrial-age agrarian culture. The approach is illustrated by simulating groundwater release of four radionuclides to an expected discharge area. We argue that the derived intake rates may serve as credible bounding cases when projected doses are evaluated for compliance with regulatory criteria.     

Time-Consistent Equilibria in Common Access Resource Games with Asymmetric Players Under Partial Cooperation

Given a differential game, if agents have different time preference rates, cooperative (Pareto optimum) solutions obtained by applying Pontryagin’s maximum principle become time inconsistent. We derive a set of dynamic programming equations in continuous time whose solutions are time-consistent equilibria for problems in which agents differ in their utility functions and also in their time preference rates. The solution assumes cooperation between agents at every time. Since coalitions at different times have different time preferences, equilibrium policies are calculated by looking for Markov (subgame perfect) equilibria in a (noncooperative) sequential game. The results are applied to the study of a cake-eating problem describing the management of a common property exhaustible natural resource. The extension of the results to a simple common property renewable natural resource model in infinite horizon is also discussed.     

Combined phytoremediation of metal-working fluids with maize plants inoculated with different microorganisms and toxicity assessment of the phytoremediated waste

The aim of this study was to validate the effectiveness of a phytoremediation procedure for metal-working fluids (MWFs) with maize plants growing in hydroponic culture in which the roots grow on esparto fibre and further improve bioremediation potential of the system with root beneficial bacteria, seeking a synergistic effect of the plant–microorganism combination. Chemical oxygen demand (COD), pH, total and type of hydrocarbons measured after phytoremediation indicated that the process with maize plants was successful, as demonstrated by the significant decrease in the parameters measured. This effect was mainly due to the plant although inoculated microorganisms had a relevant effect on the type of remaining hydrocarbons. The success of the phytoremediation process was further confirmed by two toxicity tests, one of them based on chlorophyll fluorescence measurements on maize plants and another one based on cyanobacteria, using a bioluminescent toxicity bioassay; both tests demonstrated that the phytoremediated waste was significantly less toxic than the initial non-phytoremediated MWFs.     

Physicochemical variations in atmospheric aerosols recorded at sea onboard the Atlantic–Mediterranean 2008 Scholar Ship cruise (Part I): Particle mass concentrations,size ratios,and main chemical components

We report on ambient atmospheric aerosols present at sea during the Atlantic–Mediterranean voyage of Oceanic II (The Scholar Ship) in spring 2008. A record was obtained of hourly PM₁₀, PM_2.5, and PM₁ particle size fraction concentrations and 24-h filter samples for chemical analysis which allowed for comparison between levels of crustal particles, sea spray, total carbon, and secondary inorganic aerosols. On-board monitoring was continuous from the equatorial Atlantic to the Straits of Gibraltar, across the Mediterranean to Istanbul, and back via Lisbon to the English Channel. Initially clean air in the open Atlantic registered PM₁₀ levels <10 μg m^?3 but became progressively polluted by increasingly coarse PM as the ship approached land. Away from major port cities, the main sources of atmospheric contamination identified were dust intrusions from North Africa (NAF), smoke plumes from biomass burning in sub-Saharan Africa and Russia, industrial sulphate clouds and other regional pollution sources transported from Europe, sea spray during rough seas, and plumes emanating from islands. Under dry NAF intrusions PM₁₀ daily mean levels averaged 40–60 μg m^?3 (30–40 μg m^?3 PM_2.5; c. 20 μg m^?3 PM₁), peaking briefly to >120 μg m^?3 (hourly mean) when the ship passed through curtains of higher dust concentrations amassed at the frontal edge of the dust cloud. PM₁/PM₁₀ ratios ranged from very low during desert dust intrusions (0.3–0.4) to very high during anthropogenic pollution plume events (0.8–1).     

Arsenic release from pyrite ash waste over an active hydrogeological system and its effects on water quality

Environmental Science and Pollution Research - Arsenic is a potentially toxic element of concern for environmental compartments, and it is a frequent pollutant in many abandoned industrial sites....     

Ultracentrifugation as a direct method to concentrate viruses in environmental waters: virus-like particle enumeration as a new approach to determine the efficiency of recovery

Some health important enteric viruses are considered to be emerging waterborne pathogens and so the improvement of detection of these viruses in the aquatic environment is one of the most important steps in dealing with these pathogens. Since these viruses may be present in low numbers in water, it is necessary to concentrate water samples before viral detection. Although there are several methods to concentrate viruses in environmental waters, all present some drawbacks and consequently the method should be chosen that, despite its limitations, is adequate to achieve the aim of each study. As the effectiveness of the concentration methods is evaluated by determining the efficiency of viral recovery after concentration, it is important to use a simple and effective approach to evaluate their recovery efficiency. In this work ultracentrifugation, usually used as a secondary step for virus concentration, was evaluated as the main method to concentrate directly viruses in environmental water samples, using the microscopic enumeration of virus-like particles (VLP) as a new approach to estimate the efficiency of recovery. As the flocculation method is currently employed to concentrate viruses in environmental waters, it was also used in this study to assess the efficiency of the ultracentrifugation as the main viral concentration method in environmental waters. The results of this study indicate that ultracentrifugation is an adequate approach to concentrate viruses directly from environmental waters (recovery percentages between 66 and 72% in wastewaters and between 66 and 76% in recreational waters) and that the determination of VLP by epifluorescence microscopy is a simple, fast and cheap alternative approach to determine the recovery efficiency of the viral concentration methods.     

Analytical results and effective dose estimation of the operational Environmental Monitoring Program for the radioactive waste repository in Abadia de Goiás from 1998 to 2008

This paper presents the results of the Environmental Monitoring Program for the Radioactive waste repository of Abadia de Goiás, which was originated from the accident of Goiania, conducted by the Regional Center of Nuclear Sciences (CRCN-CO) of the National Commission on Nuclear Energy (CNEN), from 1998 to 2008.The results are related to the determination of ¹³⁷Cs activity per unit of mass or volume of samples from surface water, ground water, depth sediments of the river, soil and vegetation, and also the air-kerma rate estimation for gamma exposure in the monitored site.In the phase of operational Environmental Monitoring Program, the values of the geometric mean and standard deviation obtained for ¹³⁷Cs activity per unit of mass or volume in the analyzed samples were (0.08 ± 1.16) Bq.L⁻¹ for surface and underground water, (0.22 ± 2.79) Bq.kg⁻¹ for soil, and (0.19 ± 2.72) Bq.kg⁻¹ for sediment, and (0.19 ± 2.30) Bq.kg⁻¹ for vegetation. These results were similar to the values of the pre-operational Environmental Monitoring Program.With these data, estimations for effective dose were evaluated for public individuals in the neighborhood of the waste repository, considering the main possible way of exposure of this population group.The annual effective dose obtained from the analysis of these results were lower than 0.3 mSv.y⁻¹, which is the limit established by CNEN for environmental impact in the public individuals indicating that the facility is operating safely, without any radiological impact to the surrounding environment.     

Analysis of PM2.5and PM10 in the Atmosphere of Mexico City during 2000-2002

Abstract

During the last 10 years, high atmospheric concentrations of airborne particles recorded in the Mexico City metropolitan area have caused concern because of their potential harmful effects on human health. Four monitoring campaigns have been carried out in the Mexico City metropolitan area during 2000-2002 at three sites: (1) Xalos-toc, located in an industrial region; (2) La Merced, located in a commercial area; and (3) Pedregal, located in a residential area. Results of gravimetric and chemical analyses of 330 samples of particulate matter (PM) with an aerodynamic diameter less than 2.5 μm (PM_2.5) and PM with an aerodynamic diameter less than 10 μm (PM₁₀) indicate that (1) PM_2.5/PM₁₀ average ratios were 0.42, 0.46, and 0.52 for Xalostoc, La Merced, and Pedregal, respectively; (2) the highest PM_2.5 and PM₁₀ concentrations were found at the industrial site; (3) PM_2.5 and PM₁₀ concentrations were lower at nighttime; (4) PM_2.5 and PM₁₀ spatial averages concentrations were 35 and 76 μg/m³, respectively; and (5) when the PM_2.5 standard was exceeded, nitrate, sulfate, ammonium, organic carbon, and elemental carbon concentrations were high. Twenty-four hour averaged PM_2.5 concentrations in Mexico City and Sao Paulo were similar to those recorded in the 1980s in Los Angeles. PM₁₀ concentrations were comparable in Sao Paulo and Mexico City but 3-fold lower than those found in Santiago.     

Effect of gas composition in Chemical-Looping Combustion with copper-based oxygen carriers: Fate of sulphur

Chemical-Looping Combustion (CLC) is an emerging technology for CO₂ capture because separation of this gas from the other flue gas components is inherent to the process and thus no energy is expended for the separation. Natural or refinery gas can be used as gaseous fuels and they may contain different amounts of sulphur compounds, such as H₂S and COS. This paper presents the combustion results obtained with a Cu-based oxygen carrier using mixtures of CH₄ and H₂S as fuel. The influence of H₂S concentration on the gas product distribution and combustion efficiency, sulphur splitting between the fuel reactor (FR) and the air reactor (AR), oxygen carrier deactivation and material agglomeration was investigated in a continuous CLC plant (500 W_th). The oxygen carrier to fuel ratio, ?, was the main operating parameter affecting the CLC system. Complete fuel combustion were reached at 1073 K working at ? values ≥1.5. The presence of H₂S did not produce a decrease in the combustion efficiency even when working with a fuel containing 1300 vppm H₂S. At these conditions, the great majority of the sulphur fed into the system was released in the gas outlet of the FR as SO₂, affecting to the quality of the CO₂ produced. Formation of copper sulphide, Cu₂S, and the subsequent reactivity loss was only detected working at low values of ? ≤ 1.5, although this fact did not produce any agglomeration problem in the fluidized beds. In addition, the oxygen carrier was fully regenerated in a H₂S-free environment. It can be concluded that Cu-based oxygen carriers are adequate materials to be used in a CLC process using fuels containing H₂S although quality of the CO₂ produced is affected.     

New trends in the analytical determination of emerging contaminants and their transformation products in environmental waters

Since the so-called emerging contaminants were established as a new group of pollutants of environmental concern, a great effort has been devoted to the knowledge of their distribution, fate and effects in the environment. After more than 20 years of work, a significant improvement in knowledge about these contaminants has been achieved, but there is still a large gap of information on the growing number of new potential contaminants that are appearing and especially of their unpredictable transformation products. Although the environmental problem arising from emerging contaminants must be addressed from an interdisciplinary point of view, it is obvious that analytical chemistry plays an important role as the first step of the study, as it allows establishing the presence of chemicals in the environment, estimate their concentration levels, identify sources and determine their degradation pathways. These tasks involve serious difficulties requiring different analytical solutions adjusted to purpose. Thus, the complexity of the matrices requires highly selective analytical methods; the large number and variety of compounds potentially present in the samples demands the application of wide scope methods; the low concentrations at which these contaminants are present in the samples require a high detection sensitivity, and high demands on the confirmation and high structural information are needed for the characterisation of unknowns. New developments on analytical instrumentation have been applied to solve these difficulties. Furthermore and not less important has been the development of new specific software packages intended for data acquisition and, in particular, for post-run analysis. Thus, the use of sophisticated software tools has allowed successful screening analysis, determining several hundreds of analytes, and assisted in the structural elucidation of unknown compounds in a timely manner.