The effects of burial by sand on survival and growth of Pitcher’s thistle (Cirsium pitcheri) along lake huron

Greenhouse experiments were conducted to determine the effects of sand burial on survival and growth of seedlings ofCirsium pitcheri. In 1992–1993, seedlings were buried to depths of 0, 25, 50, 75, and 100% of their height while in 1993–1994, the seedlings were buried to depths of 0, 4 cm (single burial), 4 cm (repeated burial of 1 cm every 8 days), 8 cm (single burial) and 8 cm (repeated burial of 2 cm every 8 days). Several physiological traits, net photosynthetic rate, chlorophyll a∶b ratio, leaf area, number and length of leaves, number of internodes, amount of tillering, and biomass, were measured. The results showed that all seedlings died in the complete (100%) burial, 20% died in the 75% burial and none died in the 0, 25 and 50% burial treatments. Burial of seedlings to a depth of 25% stimulated their growth but 75% burial significantly decreased the total dry weight. Repeated burial treatments exhibited significantly greater stimulation of growth than single burial. Surviving seedlings grew through the sand deposit by elongating the stem and leaf petioles, increasing the number of nodes and the length of internodes. This elongation occurred at the expense of development of the root system indicating that available energy was re-allocated to above-ground parts.     

Life Cycle Assessment and Carbon Footprint in the Wine Supply-Chain

Global warming represents one of the most critical internationally perceived environmental issues. The growing, and increasingly global, wine sector is one of the industries which is under increasing pressure to adopt approaches for environmental assessment and reporting of product-related greenhouse gas emissions. The International Organization for Vine and Wine has recently recognized the need to develop a standard and objective methodology and a related tool for calculating carbon footprint (CF). This study applied this tool to a wine previously analyzed using the life cycle assessment (LCA) methodology. The objective was to test the tool as regards both its potential and possible limitations, and thus to assess its suitability as a standard tool. Despite the tool's user-friendliness, a number of limitations were noted including the lack of accurate baseline data, a partial system boundary and the impossibility of dealing with the multi-functionality issue. When the CF and LCA results are compared in absolute terms, large discrepancies become obvious due to a number of different assumptions, as well as the modeling framework adopted. Nonetheless, in relative terms the results seem to be quite consistent. However, a critical limitation of the CF methodology was its focus on a single issue, which can lead to burden shifting. In conclusion, the study confirmed the need for both further improvement and adaptation to additional contexts and further studies to validate the use of this tool in different companies.     

Psychotropic substances in house dusts: a preliminary assessment

Environmental Science and Pollution Research - Psychotropic substances (PSs) are known to affect air and waters, while scarce attention has been paid to their occurrence in settled dusts although...     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Environmental photochemistry of fluoroquinolones in soil and in aqueous soil suspensions under solar light

The photodegradation fate of widely used fluoroquinolone (FQ) drugs has been studied both at the water–soil interface and in soil at actual concentrations (500 ng g^?1) under natural solar light. Both human and veterinary drugs have been examined, namely ciprofloxacin, danofloxacin, enrofloxacin, levofloxacin, marbofloxacin and moxifloxacin. After spiking and irradiation, samples were submitted to microwave-assisted extraction and analyzed by high-performance liquid chromatography coupled to fluorescence detection (HPLC–FD). FQs degradation was faster in aqueous soil suspension than in neat soil (but lower than in “clean” water). A number of byproducts were identified by HPLC electrospray ionization tandem mass spectrometry after a post-extraction cleanup based on a molecularly imprinted polymer phase, for a more accurate detection. The distribution in the suspension was intermediate between those observed in soils and in aqueous solutions.     

A weighted fuzzy linear programming model in economic input–output analysis: an application to risk management of energy system disruptions

Climate change exposes economic systems to numerous risks, including reduced agricultural production and electric power supply shortages. The interdependent nature of economic systems causes disruptions in any sector to cascade to other sectors via forward and backward linkages. This work develops an optimization model with which allocation of scarce goods or resources can be optimized; the model uses an overall index of satisfaction of fuzzy economic output goals under conditions of scarcity caused by climatic disruptions. The proposed model includes a vulnerability measure that integrates information elicited from expert judgment. A case study based on a scenario of drought-induced electricity shortage in the Philippine economy is examined. Results show that trade, transportation and service-oriented industries suffer losses in gross domestic product in the Philippine case.     

Photo-oxidation of NO using an exterior paint--screening of various commercial titania in powder pressed and paint films

The present work aims to evaluate the photocatalytic activity of photo-TiO(2) from various producers (Evonik, Kemira, Kronos, Millennium, Sachtleben and Tayca), in the form of powder pressed films and upon incorporation in a water-based paint, for outdoor NO abatement. The photocatalytic activity of the different samples was evaluated in terms of NO conversion and selectivity towards nitrite and nitrate ions following approximately the ISO 22197-1:2007(E) standard. The highest yields obtained for powder pressed films were achieved with VLP7000 (0.70), followed by VLP7101 (0.55) and UVLP7500 (0.55), all from Kronos. On the other hand, when incorporated in paint films, the highest yields were obtained with PC500 and PC105 from Millennium and UV100 from Sachtleben (ca. 0.15). The paint matrix plays an important role on the photocatalytic activity. In particular, the time for steady state is one or two orders of magnitude higher when the photocatalysts are incorporated in paint films in relation to the powder pressed films. The paint films were activated following the procedure recommended by the above-mentioned standard. However, the photocatalytic activity of films incorporating P25 (Evonik) was displayed only when higher power radiation and higher humidity conditions were used. This allowed for similar levels of photocatalytic activity as the other paint films.     

Disaster management and mitigation: the telecommunications infrastructure

Among the most typical consequences of disasters is the near or complete collapse of terrestrial telecommunications infrastructures (especially the distribution network–the 'last mile') and their concomitant unavailability to the rescuers and the higher echelons of mitigation teams. Even when such damage does not take place, the communications overload/congestion resulting from significantly elevated traffic generated by affected residents can be highly disturbing. The paper proposes innovative remedies to the telecommunications difficulties in disaster struck regions. The offered solutions are network-centric operations-cap able, and can be employed in management of disasters of any magnitude (local to national or international). Their implementation provide ground rescue teams (such as law enforcement, firemen, healthcare personnel, civilian authorities) with tactical connectivity among themselves, and, through the Next Generation Network backbone, ensure the essential bidirectional free flow of information and distribution of Actionable Knowledge among ground units, command/control centres, and civilian and military agencies participating in the rescue effort.     

Darcian preferential water flow and solute transport through bimodal porous systems: Experiments and modelling

Soils often exhibit a variety of small-scale heterogeneities such as inter-aggregate pores and voids which partition flow into separate regions. In this paper a methodological approach is discussed for characterizing the hydrological behaviour of a heterogeneous clayey–sandy soil in the presence of structural inter-aggregate pores. For the clay soil examined, it was demonstrated that, coupling the transfer function approach for analyzing BTCs and water retention data obtained with different methods from laboratory studies captures the bimodal geometry of the porous system along with the related existence of fast and slow flow paths. To be effectively and reliably applied this approach requires that the predominant effects of the soil hydrological behaviour near saturation be supported by accurate experimental data of both breakthrough curves (BTCs) and hydraulic functions for high water content values. This would allow the separation of flow phases and hence accurate identification of the processes and related parameters.     

A Simulation Study on the Efficacy of Advanced Belt Restraints to Mitigate the Effects of Obesity for Rear-Seat Occupant Protection in Frontal Crashes

Objective: Recent field data analyses have shown that the safety advantages of rear seats relative to the front seats have decreased in newer vehicles. Separately, the risks of certain injuries have been found to be higher for obese occupants. The objective of this study is to investigate the effects of advanced belt features on the protection of rear-seat occupants with a range of body mass index (BMI) in frontal crashes.

Methods: Whole-body finite element human models with 4 BMI levels (25, 30, 35, and 40 kg/m²) developed previously were used in this study. A total of 52 frontal crash simulations were conducted, including 4 simulations with a standard rear-seat, 3-point belt and 48 simulations with advanced belt features. The parameters varied in the simulations included BMI, load limit, anchor pretensioner, and lap belt routing relative to the pelvis. The injury measurements analyzed in this study included head and hip excursions, normalized chest deflection, and torso angle (defined as the angle between the hip–shoulder line and the vertical direction). Analyses of covariance were used to test the significance (P <.05) of the results.

Results: Higher BMI was associated with greater head and hip excursions and larger normalized chest deflection. Higher belt routing increased the hip excursion and torso angle, which indicates a higher submarining risk, whereas the anchor pretensioner reduced hip excursion and torso angle. Lower load limits decreased the normalized chest deflection but increased the head excursion. Normalized chest deflection had a positive correlation with maximum torso angle. Occupants with higher BMI have to use higher load limits to reach head excursions similar to those in lower BMI occupants.

Discussion and Conclusion: The simulation results suggest that optimizing load limiter and adding pretensioner(s) can reduce injury risks associated with obesity, but conflicting effects on head and chest injuries were observed. This study demonstrated the feasibility and importance of using human models to investigate protection for occupants with various BMI levels. A seat belt system capable of adapting to occupant size and body shape will improve protection for obese occupants in rear seats.