Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs)

Per-and polyfluoroalkyl substances(PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs,precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well.Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids(PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters(PAPs) were 15–20 ng/g dry weight, the sum of fluorotelomer sulfonic acids(FTSAs) was 0.8–1.3 ng/g,and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2 ng/g. Persistent PFSAs and PFCAs were detected at 1.9–3.9 ng/g and 2.4–7.3 ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid(PFHxA), perfluorooctanoic acid(PFOA), perfluorohexane sulfonic acid(PFHxS), and perfluorooctane sulfonic acid(PFOS)had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%,respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.     

The European Union Solidarity Fund: an assessment of its recent reforms

After extensive flooding in 2002, the European Union Solidarity Fund (EUSF) was created as an ex post loss-financing vehicle for EU member states and candidate countries in the case of disasters that exceed the government’s resources to cope. The EUSF is viewed as a valuable instrument for pooling risk among countries in Europe and potentially as a model for financing loss and damage from climate change in vulnerable countries worldwide. This paper assesses its future prospects taking account of reforms adopted in 2014. Our analysis is based on three recognized aims of the Solidarity Fund: its promotion of solidarity with those countries having the least capacity to cope with major disasters; its contribution to proactive disaster risk reduction and management (climate adaptation); and its robustness with regard to its risk of depletion (stress testing). Using a simulation approach for future disasters, we conclude that the reformed EUSF’s risk of depletion, although it is reasonably robust to more frequent disasters, could be reduced by increasing member state contributions and/or engaging in risk transfer. The European Commission has taken important steps in linking the fund to proactive risk reduction; yet, by changing its budgeting practices, the commission could be more proactive in encouraging risk management in member states. In its current form, the EUSF does not embed needs-based solidarity. Lower-income “new” member states have received disproportionately less compensation in terms of eligible losses, although on average, they have received more disaster aid than what they contribute to the fund. Solidarity could be enhanced by changing the rules for disbursing aid. After briefly describing alternative risk-pooling models in the Caribbean, Africa, and Europe, we suggest how design features of the EUSF as compared to other regional risk pools can inform discussions on the Warsaw International Loss and Damage Mechanism.     

Soil and preen waxes influence the expression of carotenoid-based plumage coloration

The signaling function of carotenoid-based plumage is mainly determined by the concentration of pigments in feathers. For this reason, most studies of the proximate control of coloration focus on processes during and preceding moult. In great tits Parus major, past research demonstrates that carotenoid-based plumage coloration honestly indicates male quality and, thus, may be a sexually selected signal. In this study, we investigate how dirt and preen oil influence the coloration of carotenoid-based feathers in the great tit. We collected six feathers from each individual bird; three feathers served as controls while the remaining three feathers were washed with a chloroform/methanol mixture to remove soil and preen waxes. We assessed plumage coloration using digital photography. This cleaning procedure slightly enhanced ornamentation; the experimentally cleaned feathers expressed hues shifted towards shorter wavelengths and expressed brighter overall coloration than control feathers. This is the first experimental study conducted on wild birds demonstrating that, in addition to pigment concentration, the presence of preen waxes and soils on feathers may contribute to variation in coloration.     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Variability in environmental impacts of Brazilian soybean according to crop production and transport scenarios

Soybean production and its supply chain are highly dependent on inputs such as land, fertilizer, fuel, machines, pesticides and electricity. The expansion of this crop in Brazil in recent decades has generated concerns about its environmental impacts. To assess these impacts, two representative chains supplying soybeans to Europe were identified: Center West (CW) and Southern (SO) Brazil. Each supply chain was analyzed using Life Cycle Assessment methodology. We considered different levels of use of chemical and organic fertilizers, pesticides and machinery, different distances for transportation of inputs and different yield levels. Because transportation contributed strongly to environmental impacts, a detailed study was performed to identify the routes used to transport soybeans to seaports. Additionally, we considered different levels of land occupation and land transformation to represent the impact of deforestation in the CW region. Environmental impacts were calculated for 1000 kg of soybean up to and including the delivery to Europe at the seaport in Rotterdam, at 13% humidity. Overall results showed that the impacts are greater for CW than for SO for all impact categories studied, including acidification (7.7 and 5.3 kg SO₂ eq., respectively), climate change (959 and 510 kg CO₂ eq.), cumulative energy demand (12,634 and 6,999 MJ) and terrestrial ecotoxicity (4.9 and 3.1 kg 1,4-DCB eq.), except eutrophication and land occupation. The same trend was observed for the crop-production stage. Efforts to reduce chemical fertilizers and diesel consumption can reduce CO₂ emissions. Although deforestation for crop production has decreased in recent years, the contribution of deforestation to climate change and cumulative energy demand remains significant. In the CW scenario deforestation contributed 29% to climate change and 20% to cumulative energy demand. Results also showed that although there are different transportation options in Brazil, the current predominance of road transport causes severe environmental impacts. In CW, road transport contributed 19% to climate change and 24% to cumulative energy demand, while in SO it contributed 12% and 15% to these impacts, respectively. Improvements in the logistics of transportation, giving priority to rail and river transports over road transport, can contribute significantly to reducing greenhouse gas emissions and decreasing energy use. Future studies involving Brazilian soybeans should take into account the region of origin as different levels of environmental impact are predicted.     

Effects of environmentally relevant concentrations of metallic compounds on the flatfish Scophthalmus maximus: biomarkers of neurotoxicity,oxidative stress and metabolism

Flatfish species, such as the turbot (Scophthalmus maximus), are common targets for toxic effects, since they are exposed through the food chain (ingestion of contaminated preys) and are in direct contact with the waterborne contaminant and sediments. Furthermore, these fish species live in close proximity to interstitial water that frequently dissolves high amounts of contaminants, including metals. Despite this significant set of characteristics, the present knowledge concerning flatfish contamination and toxicity by metals is still scarce. To attain the objective of assessing the effects of metals on a flatfish species, S. maximus specimens were chronically exposed to lead, copper and zinc, at ecologically relevant concentrations, and biochemical (oxidative stress: catalase and glutathione S-transferases activities, and lipid peroxidation; neurotoxicity: cholinesterase activity) parameters were assessed on selected tissues (gills and liver). Copper had no significant effects on all tested parameters; lead was causative of significant increases in liver GSTs activities and also in lipoperoxidation of gill tissue; exposure to zinc caused a significant increase in catalase activity of gill tissue. None of the tested metals elicited noteworthy effects in terms of neurotoxicity. The obtained results showed that only the metal lead is of some environmental importance, since it was able to cause deleterious modifications of oxidative nature at relevant concentrations.     

The first Neanderthal tooth found North of the Carpathian Mountains

An upper second permanent molar from a human was found alongside numerous tools of the Micoquian tradition and was excavated in Stajnia Cave, which is located over 100 km North of the Carpathian Mountains in southern Poland. The age of these finds has been established within a time-span of late Saalian to early Weichselian, most likely to OIS 5c or 5a, according to the palaeontological, geological, archaeological and absolute dating of the layer from which they were obtained. An examination of the morphology of the human molar indicates that this tooth exhibits many traits frequently occurring in Neanderthal upper molars. Although the occurrence of derived Neanderthal traits in the Stajnia molar cannot be firmly established because of degradation of its cusps, the presence of the above-mentioned features allows the assertion that this tooth belonged to a Neanderthal. The age of the Stajnia tooth and the archaeological context of this find also indicate that this molar is of Neanderthal origin.     

Assessment of health risk associated with persistent organic pollutants in water

This paper presents the results of analyses of water samples taken from water intakes supplying one of the districts located near the city of Wroc?aw. Surprisingly high concentrations of polychlorinated biphenyls and chloroorganic pesticides, classified as persistent organic pollutants (POPs), were detected in the monitored sites. Basing on the analytical and toxicological data, the individual health risks related to carcinogenic effects (excess cancer risk over a lifetime) in humans were assessed, resulting from direct ingestion of community water. Also noncarcinogenic effects resulting from exposure to the examined POPs were determined. The conservative approach to risk assessment, taking into account a safety margin for data incompleteness, was adopted. The carcinogenic risk was found to slightly exceed the unconditionally acceptable risk of 10^?6 in the case of polychlorinated biphenyls and hexachlorocyclohexane, for all the inhabitant populations. The determined values of noncarcinogenic effects expressed by hazard quotient and hazard index indicate that the water pollutants and their concentrations do not cause an increase in noncarcinogenic incidences in the inhabitants using the monitored water sources.