Global pilot study for persistent organic pollutants (POPs) using PUF disk passive air samplers

Polyurethane foam (PUF) disks were deployed at global background sites, to test logistical issues associated with a global monitoring network for persistent organic pollutants (POPs). alpha-HCH, exhibited relatively high and uniform concentrations (17-150 pg/m3) at temperate and arctic sites with elevated concentrations associated with trans-Pacific inflow. Concentrations were much lower (<5 pg/m3) in Bermuda, Chile and Cape Grim. Concentrations for gamma-HCH, the main component of lindane, were spatially similar to the alpha-HCH pattern but lower in magnitude (typically, <10 pg/m3). Chlordane concentrations (sum of cis-chlordane, trans-chlordane and trans-nonachlor) were also low (<10 pg/m3). Dieldrin concentrations were in the range 2-25 pg/m3 at most sites but elevated in Bermuda. Back trajectories suggest that advection from Africa and the US may contribute. Endosulfan, a popular current-use pesticide, exhibited highest concentrations ranging from tens to hundreds of pg/m3. There was good agreement between duplicate samplers at each site and PUF disk-derived air concentrations agreed with high volume data. Few logistical/analytical problems were encountered in this pilot study.     

Hiding in Plain Sight? It’s Time to Investigate Other Possible Transmission Routes for Hepatitis E Virus (HEV) in Developed Countries

Historically in developed countries, reported hepatitis E cases were typically travellers returning from countries where hepatitis E virus (HEV) is endemic, but now there are increasing numbers of non-travel-related (“autochthonous”) cases being reported. Data for HEV in New Zealand remain limited and the transmission routes unproven. We critically reviewed the scientific evidence supporting HEV transmission routes in other developed countries to inform how people in New Zealand may be exposed to this virus. A substantial body of indirect evidence shows domesticated pigs are a source of zoonotic human HEV infection, but there is an information bias towards this established reservoir. The increasing range of animals in which HEV has been detected makes it important to consider other possible animal reservoirs of HEV genotypes that can or could infect humans. Foodborne transmission of HEV from swine and deer products has been proven, and a large body of indirect evidence (e.g. food surveys, epidemiological studies and phylogenetic analyses) support pig products as vehicles of HEV infection. Scarce data from other foods suggest we are neglecting other potential sources of foodborne HEV infection. Moreover, other transmission routes are scarcely investigated in developed countries; the role of infected food handlers, person-to-person transmission via the faecal–oral route, and waterborne transmission from recreational contact or drinking untreated or inadequately treated water. People have become symptomatic after receiving transfusions of HEV-contaminated blood, but it is unclear how important this is in the overall hepatitis E disease burden. There is need for broader research efforts to support establishing risk-based controls.     

Phosphorus Flows to and from Swedish Agriculture and Food Chain

Phosphorus flows in Swedish agriculture and food chain were studied by material flow analysis. The system studied included agriculture, food consumption, related waste and wastewater from private households and municipal wastewater treatment plants. Swedish farmland had net annual phosphorus inputs of ~12 600 metric tons (4.1 kg P ha⁻¹) in 2008–2010. The total import of phosphorus in food and feed to Sweden exceed imports of phosphorus in fertilizers. Despite strict animal density regulations relating to manure phosphorus content, phosphorus is accumulating on Swedish animal farms. The total quantity of manure produced greatly exceeds imported mineral phosphorus fertilizer and almost equals total phosphorus inputs to Swedish farmland.     

Relevant parameters for assessing the environmental impact of some pyridinium, ammonium and pyrrolidinium based ionic liquids

Several physico-chemical properties relevant to determine the environmental impact of ionic liquids - aqueous solubility, octanol/water partition coefficient, chromatographically derived lipophilicity and infinite dilution diffusion coefficients in water - were measured in ionic liquids based on pyridinium, ammonium and pyrrolidinium cations with bis(trifluoromethylsulfonyl)imide anions. The influence of the presence of hydroxyl or ester groups in the physico-chemical properties of these liquids was checked. It appeared that the presence of functional oxygenated moieties reduces the lipophilicity of ionic liquids and so decreases the risk of bioaccumulation in environment.     

Analysing influencing factors of corporate environmental information collection,management and communication

Relevant and understandable environmental information about production and products is needed in any attempt to mitigate environmental impact from production, products, and consumption. This paper introduces an analytical framework for studying the drivers, barriers and enablers of corporate environmental information collection, management and communication. The framework is built up by two main parts. In the first, we sort out what corporate environmental information is and how to spot gaps in information collection, management and communication. The second part examines the stakeholders and company features that could constitute important influencing factors. The framework is intended to support qualitative and quantitative studies which aim to increase understanding of what shapes the flow of environmental information in companies and product chains.     

Identification of various laccases induced by anthracene and contribution to its degradation in a Mediterranean coastal pine litter

Mediterranean coastal ecosystems are known to be highly subject to natural and anthropic environmental stress. In this study, we examine the effects of anthracene as a common pollutant on the total microbial communities from a Pinus halepensis litter of a typical Mediterranean coastal site (Les Calanques, Marseille). The main objective was to identify the microbial factors leading the resilience of this ecosystem. Two questions were addressed: (i) how lignin-degrading enzymes (Laccase, Lignin-peroxidase and Mn-peroxidase) are affected by the presence of this molecule, (ii) whether the indigenous consortia are involved in its degradation in mesocosms under favorable incubation conditions (25 °C, 60% WHC) and after different time intervals (1 and 3 month(s)). We found a strong increase in laccase production in the presence of anthracene after 3 months, together with anthracene degradation (28% ± 5). Moreover 9,10-anthraquinone is detected as the product of anthracene oxidation after 3 months. However neither lignin-peroxidase activity nor Mn-peroxidase activity is detected. Laccase proteins directly extracted from litter were sequenced via Nano-LC-MS/MS and reveal twelve different peptide sequences induced by the presence of anthracene in the mesocoms. Our study confirms the major detoxification role of this enzymatic system and highlights the high degradation potential of fungal species inhabiting P. halepensis litter, a factor in the resilience of Mediterranean ecosystems.     

Biodegradation of polyethylene films with prooxidant additives

Prooxidant additives represent a promising solution to the problem of the environment contamination with polyethylene film litter. Prooxidants accelerate photo- and thermo-oxidation and consequent polymer chain cleavage rendering the product apparently more susceptible to biodegradation. The question not fully resolved remains the biodegradation itself, its mechanism and especially the factors influencing the time-frame in which it can occur. The presented review is aimed to provide comprehensible information for both microbiologists and polymer scientists, who need participate in the research leading to an understanding of the microorganism action on the oxidized polyethylene and to design of new materials.     

Manufacturing actor’s LCA

Modern industrial environmental management encompasses life-cycle thinking. This entails considering not only the emissions and resource use of the company’s production processes, but also the environmental consequences of all processes related to a product’s life cycle. However, no single actor can influence the whole life cycle of a product. To be effective, analysis methods intended to support improvement actions should therefore also consider the decision makers’ power to influence.Regarding the life cycle of a product, there are at least as many perspectives on life-cycle thinking as there are actors. This paper presents an approach with which manufacturing decision makers can sharpen the focus in life-cycle assessment (LCA) from a conventional ‘products or services’ emphasis to a company’s manufacturing processes. The method has been developed by combining knowledge gained from earlier LCA studies with new empirical findings from an LCA study of an SKF manufacturing line.We demonstrate how system boundaries and functional units in an LCA can be defined when adding the perspective of a manufacturing decision maker to the product life-cycle perspective. Such analysis helps manufacturing decision makers identify improvement potentials in their spheres of influence, by focusing on the environmental consequences of energy and material losses in manufacturing rather than merely accounting for the contributions of individual stages of the life cycle to the overall environmental impact. The method identifies and directly relates the environmental consequences of emissions or raw material inputs in the product life cycle to manufacturing processes. In doing so, the holistic systems perspective in LCA is somewhat diminished in favor of the relevance of results to manufacturing decision makers.