Effect of alum addition on the performance of submerged membranes for wastewater treatment.

The effect of aluminum sulfate (alum) addition on membrane performance was investigated, with a particular focus on membrane fouling. During initial operation, alum was added and the performance monitored. After terminating alum addition, the transmembrane pressure (TMP), which is indicative of membrane resistance to flow or fouling, increased. Accompanying the increase in TMP was an increase in the organic nonsettleable fraction (colloidal + dissolved) content of the mixed liquor and deterioration of permeate quality and floc strength. Permeate polysaccharide concentrations increased significantly, suggesting a preferential binding of solution polysaccharides by alum. Upon reinitiating alum addition, the TMP only partially recovered, indicating some irreversible fouling, while mixed liquor nonsettleable organic material, permeate quality, and floc strength returned to initial levels. These results suggest that direct alum addition to membrane bioreactors can improve membrane performance by reducing the organic fouling material and improving floc structure and strength. It appears that bulk liquid polysaccharides may contribute to irreversible membrane fouling, and this fraction can be efficiently controlled through the alum addition.     

Time Series Analysis to Monitor and Assess Water Resources: A Moving Average Approach

An understanding of the behavior of the groundwater body and its long-term trends are essential for making any management decision in a given watershed. Geostatistical methods can effectively be used to derive the long-term trends of the groundwater body. Here an attempt has been made to find out the long-term trends of the water table fluctuations of a river basin through a time series approach. The method was found to be useful for demarcating the zones of discharge and of recharge of an aquifer. The recharge of the aquifer is attributed to the return flow from applied irrigation. In the study area, farmers mainly depend on borewells for water and water is pumped from the deep aquifer indiscriminately. The recharge of the shallow aquifer implies excessive pumping of the deep aquifer. Necessary steps have to be taken immediately at appropriate levels to control the irrational pumping of deep aquifer groundwater, which is needed as a future water source. The study emphasizes the use of geostatistics for the better management of water resources and sustainable development of the area.     

Performance evaluation of up-flow anaerobic sludge blanket (UASB) reactor for treatment of paper mill wastewater

IntroductionInrecentyearsenergyconsiderationsandenvironmentalconcernshaveincreasedtheinterestindirectanaerobictreatmentofindustrialwastes.Theanaerobicmethodofwastetreatmentoffersunderthepresentcircumstancesanumberofsignificantadvantageswithlittleseriousorinsuperabledrawbacksoverothertreatmentmethods .Conventionalwastemanagementtechnologiescommonlyadoptedintropicalclimatesarenotonlyexpensivebutalsowarrantexactoperationandmaintenancerequirements .Mostofthedevelopingcountriessufferfromsevereenvir…     

Larvicidal activity of neem and karanja oil cakes against mosquito vectors, Culex quinquefasciatus (say), Aedes aegypti (L.) and Anopheles stephensi (L.)

Larvicidal effect of neem (Azadirachta indica) and karanja (Pongamia glabra) oil cakes (individuals and combination) was studied against mosquito species. Both the oil cakes showed larvicidal activity against the mosquito species tested. The combination of neem and karanja oil cakes in equal proportion proved to have better effect than the individual treatments. The combination of the two oil cakes recorded an LC95 of 0.93, 0.54 and 0.77% against the mosquitoes, Culex quinquefasciatus, Aedes aegypti and Anopheles stephensi respectively The increase in efficacy of the combination treatment over individuals in all the mosquito larvae tested was found to range about 4 to 10 fold in terms of LC50 and 2 to 6 fold in terms of LC95.     

Rapid immobilization of viable Bacillus pseudomycoides in polyvinyl alcohol/glutaraldehyde hydrogel for biological treatment of municipal wastewater

A new approach for easy synthesis of Bacillus pseudomycoides immobilized polyvinyl alcohol (PVA)/glutaraldehyde (GA) hydrogel for application in a wastewater treatment system is reported. Optimization studies revealed that GA/PVA mass ratio of 0.03 and acidic pH of 2 were required for hydrogel synthesis and eventually for bacterial cell immobilization. The synthesized crosslinked matrix possessed a pore size suitable for microbial cell entrapment while maintaining cell accessibility to external environment for bioremediation. Possible crosslinking and bacterial cell immobilization in the hydrogel were evidenced by FTIR, XRD, and SEM studies, respectively. Further, the extent of crosslinking of GA with PVA was investigated and confirmed by transmittance and permeability experiments. The viability and proliferation of hydrogel embedded cells (after 25 days) was confirmed by confocal fluorescence microscopy which also indicated that acidic pH of polymer solution did not affect the immobilized live cells. B. pseudomycoides immobilized hydrogel were demonstrated to be effective for treatment of municipal wastewater and reduced biochemical oxygen demand (BOD), chemical oxygen demand (COD), and protein content below the recommended levels. Overall, the results from this bench-scale work show that employing bacteria-embedded PVA/GA hydrogel for the treatment of municipal wastewater yield promising results which should be further explored in pilot/field-scale studies.

     

Assessment of organochlorine pesticide residues in Indian flue-cured tobacco with gas chromatography-single quadrupole mass spectrometer

Presence of pesticide residues in tobacco increases health risk of both active and passive smokers, apart from the imminent potential health problems associated with it. Thus, monitoring of pesticide residue is an important issue in terms of formulating stringent policies, enabling global trade and safeguarding the consumer’s safety. In this study, a gas chromatography-single quadrupole mass spectrometry (GC-MS) method based upon quantifier-qualifier ions (m/z) ratio was employed for detecting and assessing ten organochlorine pesticide residues (α-HCH, β-HCH, γ-HCH, δ-HCH, 2,4-DDT, 4,4-DDT, endrin, α-endosulfan, β-endosulfan and endosulfan sulphate) in 152 flue-cured (FC) tobacco leave samples from two major tobacco growing states, Karnataka and Andhra Pradesh, of India. In the majority of samples, pesticide residue levels were below the limit of quantification (LOQ). In few samples, pesticide residues were detected and they found to comply with the guidance residue levels (GRL) specifications of the Cooperation Center for Scientific Research Relative to Tobacco (CORESTA). Detection of the phase out pesticides like DDT/HCH might be due to transfer of persistent residues from the environmental components to the plant. This is the first report on these ten organochlorine pesticide residues in Indian FC tobacco.     

Garcinia gummi-gutta (L.) Robs.: A promising feedstock for biodiesel production

In the present study crude Garcinia gummi-gutta seed oil was evaluated as a potential feedstock for biodiesel production. Due to the high acid value (29.73 mg KOH/g) the oil was converted to biodiesel by using acid catalyzed esterification process. Further, biodiesel properties of the sample were evaluated, which fulfilled the biodiesel specifications laid by ASTM D6751, EN 14214 and IS 15607. The biodiesel possessed excellent cetane number (66.09) and a high flash point (158°C). In addition, the calorific value (41.03 MJ/kg) was very close to diesel fuel. The results suggest that the G. gummi-gutta can be an alternative source for diesel and can be used as a potential feedstock for biodiesel in India.     

Modeling of high step-up converter in closed loop for renewable energy applications

A majority of small-scale renewable energy sources including the solar PV modules, fuel cells gives out output voltage in the range of around 15–40 V DC. This needs to be stepped up to suit load requirements using a high voltage gain converter. Since renewable sources inherently generate sudden variations in input voltage, a good output voltage profile even during such random variations in input conditions is essential. This paper presents modeling of a high step-up converter configuration with closed loop control. The converter topology is designed to operate with moderate duty ratios and the simple coupled inductor. The converter is capable of high step-up and can find application in solar PV systems. The controller response is good with low steady state error and required dynamics. The modeling and simulation is carried out using MATLAB/Simulink software package.     

Utilization of plant-based natural coagulants as future alternatives towards sustainable water clarification

Rapid industrial developments coupled with surging population growth have complicated issues dealing with water scarcity as the quest for clean and sanitized water intensifies globally. Existing flesh water supplies could be contaminated with organic, inorganic and biological matters that have potential harm to the society. Turbidity in general is a measure of water cloudiness induced by such colloidal and suspended matters and is also one of the major criteria in raw water monitoring to meet the stipulated water quality guidelines. Turbidity reduction is often accomplished using chemical coagulants such as alum. The use of alum is widely associated with potential development of health issues and generation of voluminous sludge. Natural coagulants that are available in abundance can certainly be considered in addressing the drawbacks associated with the use of chemical coagulants. Twenty one types of plant-based natural coagulants categorized as fruit waste and others are identified and presented collectively with their research summary in this review. The barriers and prospects of commercialization of natural coagulants in near future are also discussed.     

Characterization and seasonal distribution of microplastics in the nearshore sediments of the south-east coast of India,Bay of Bengal

• MPs in the coastal sediment of south-east coast of India are quantified. • High MPs are recorded near river mouths and nearshore regions. • Polyethylene and polypropylene are the major polymers observed. • MPs contamination is higher than the values reported elsewhere. In view of increasing Microplastics (MPs) contamination in the marine environment and dearth of baseline data, a study was conducted on the abundance, characterization, and seasonal distribution of MPs in the nearshore sediments of the south-east coast of India. Sediment samples (n = 130) were collected at a distance of 1 km and 10 km from the shore region at varying depths (8–45 m) along the Chennai to Puducherry coast (165 km stretch), representing two seasons, i.e., south-west (July 2019 and July 2020) and north-east (January 2020) monsoons. The average abundance of MPs at the 22 offshore sites along the Chennai to Puducherry coast varied from 9±4.3 to 19±12.9 particles/50 g dry weight, in July 2019 and January 2020, respectively. July 2020 had an average abundance of 10±4.5 particles/50 g dry weight. Spatially, high levels of MPs were found at 1km stations and transects in proximity to the river inlets, and temporally, the north-east month recorded the maximum concentration. The dominant morphotype was the filament, and the major polymers were polyethylene and polypropylene. Scanning Electron Microscope (SEM) images revealed the surface irregularity and degradation of MPs due to weathering. The study highlights that high sediment contamination by MPs occurs during heavy rainfall and accumulates closer to river inlets. Eventually, this study suggests that appropriate management of plastic wastes on the landside will reduce MP contamination in the marine environment.