Methodological issues in forestry mitigation projects: a case study of Kolar district

There is a need to assess climate change mitigation opportunities in forest sector in India in the context of methodological issues such as additionality, permanence, leakage and baseline development in formulating forestry mitigation projects. A case study of forestry mitigation project in semi-arid community grazing lands and farmlands in Kolar district of Karnataka, was undertaken with regard to baseline and project scenario development, estimation of carbon stock change in the project, leakage estimation and assessment of cost-effectiveness of mitigation projects. Further, the transaction costs to develop project, and environmental and socio-economic impact of mitigation project was assessed. The study shows the feasibility of establishing baselines and project C-stock changes. Since the area has low or insignificant biomass, leakage is not an issue. The overall mitigation potential in Kolar for a total area of 14,000 ha under various mitigation options is 278,380 t C at a rate of 20 t C/ha for the period 2005–2035, which is approximately 0.67 t C/ha/year inclusive of harvest regimes under short rotation and long rotation mitigation options. The transaction cost for baseline establishment is less than a rupee/t C and for project scenario development is about Rs. 1.5–3.75/t C. The project enhances biodiversity and the socio-economic impact is also significant.

Sorption of cadmium and zinc from aqueous solutions by zeolite 4A, zeolite 13X and bentonite

The sorption and desorption of cadmium and zinc on zeolite 4A, zeolite 13X and bentonite has been studied using batch sorption studies. Parameters such as equilibrium time, effect of pH and sorbent dose were studied. The sorbents exhibited good sorption potential for cadmium and zinc with a peak value at pH 6.0 and 6.5, respectively. The sorption followed the Freundlich sorption model. More than 70% sorption occurred within 20 min and equilibrium was attained at around 90 min for the three sorbents. The metals sorption by zeolite 4A was higher than that by zeolite 13X and bentonite. The desorption studies were carried out using NaCl solution and the effect of NaCl concentration on desorption was also studied. Maximum desorption of 76% for cadmium and 80% for zinc occurred with 10% NaCl.     

Modeling of high step-up converter in closed loop for renewable energy applications

A majority of small-scale renewable energy sources including the solar PV modules, fuel cells gives out output voltage in the range of around 15–40 V DC. This needs to be stepped up to suit load requirements using a high voltage gain converter. Since renewable sources inherently generate sudden variations in input voltage, a good output voltage profile even during such random variations in input conditions is essential. This paper presents modeling of a high step-up converter configuration with closed loop control. The converter topology is designed to operate with moderate duty ratios and the simple coupled inductor. The converter is capable of high step-up and can find application in solar PV systems. The controller response is good with low steady state error and required dynamics. The modeling and simulation is carried out using MATLAB/Simulink software package.     

Role of protein, amino acids, and enzyme activity on odor production from anaerobically digested and dewatered biosolids.

The main objective of this research was to test the hypothesis that bioavailable protein and, more specifically, the sulfur-containing amino acids within the protein, can be degraded by proteolytic enzymes to produce odor-causing compounds--mainly volatile sulfur compounds (VSCs)--during biosolids storage. To achieve these objectives, samples of digester effluent and cake solids were collected at 11 different wastewater treatment plants in North America, and the samples were analyzed for protein and amino acid content and general protein-degrading enzyme activity. At the same time, cake samples were stored using headspace bottles, the concentration of VSCs were measured using gas chromatography, and olfactometry measurements were made by a trained odor panel. The results showed that the bound cake protein content and methionine content was well-correlated with VSC production and the detection threshold measured by the odor panel.     

Significance of design and operational variables in chemical phosphorus removal

Batch and continuous experiments using model and real wastewaters were conducted to investigate the effect of metal salt (ferric and alum) addition in wastewater treatment and the corresponding phosphate removal from a design and operational perspective. Key factors expected to influence the phosphorus removal efficiency, such as pH, alkalinity, metal dose, metal type, initial and residual phosphate concentration, mixing, reaction time, age of flocs, and organic content of wastewater, were investigated. The lowest achievable concentration of orthophosphate under optimal conditions (0.01 to 0.05 mg/L) was similar for both aluminum and iron salts, with a broad optimum pH range of 5.0 to 7.0. Thus, in the typical operating range of wastewater treatment plants, pH is not a sensitive indicator of phosphorus removal efficiency. The most significant effect for engineering practice, apart from the metal dose, is that of mixing intensity and slow kinetic removal of phosphorus in contact with the chemical sludge formed. Experiments show that significant savings in chemical cost could be achieved by vigorously mixing the added chemical at the point of dosage and, if conditions allow, providing a longer contact time between the metal hydroxide flocs and the phosphate content of the wastewater. These conditions promoted the achievement of less than 0.1 mg/L residual orthophosphate content, even at lower metal-to-phosphorus molar ratios. These observations are consistent with the surface complexation model presented in a companion paper (Smith et al., 2008).     

Denitrification with carbon addition--kinetic considerations

The Blue Plains Advanced Wastewater Treatment Plant (Washington, D.C.) uses methanol as an external carbon source in a postdenitrification process, to achieve low effluent total nitrogen concentrations. This becomes more difficult in winter, at lower mixed liquor temperatures and higher flows, as a consequence of the kinetic behavior of the methanol-utilizing heterotrophs. The paper reports on an experimental batch test study conducted on Blue Plains postdenitrification sludge to investigate (1) the maximum specific growth rate of methanol-utilizing heterotrophs (Mu(METH)); (2) the temperature dependency of the growth rate; and (3) the efficacy of alternate substrates (ethanol, acetate, and sugar). A limited number of tests were conducted on sludge from two other treatment plants with methanol addition.     

Garcinia gummi-gutta (L.) Robs.: A promising feedstock for biodiesel production

In the present study crude Garcinia gummi-gutta seed oil was evaluated as a potential feedstock for biodiesel production. Due to the high acid value (29.73 mg KOH/g) the oil was converted to biodiesel by using acid catalyzed esterification process. Further, biodiesel properties of the sample were evaluated, which fulfilled the biodiesel specifications laid by ASTM D6751, EN 14214 and IS 15607. The biodiesel possessed excellent cetane number (66.09) and a high flash point (158°C). In addition, the calorific value (41.03 MJ/kg) was very close to diesel fuel. The results suggest that the G. gummi-gutta can be an alternative source for diesel and can be used as a potential feedstock for biodiesel in India.     

Do alternate bacterial indicators and pathogens increase after centrifuge dewatering of anaerobically digested biosolids?

The objectives of this research were to evaluate the potential for sudden increase and/or regrowth of alternative bacteria as either indicators or pathogens after dewatering of thermophilic and mesophilically digested biosolids. The results showed that, in general, for thermophilic processes, even when a statistically significant (p < 0.05) sudden increase and regrowth occurred for fecal coliforms, Escherichia coli, and Enterococci, it did not occur for Salmonella or Aeromonas. For the mesophilic process evaluated, sudden increase did not occur, but regrowth occurred for fecal coliforms, E. coli, Enterococci, and Salmonella. The results have implications for Class A and B biosolids regulations, as both fecal coliform and Salmonella are part of the regulatory limits. The results also suggest that the public health risks are minimal, as a result of the potential sudden increase and regrowth that may occur.     

Morphological changes at Vellar estuary, India--impact of the December 2004 tsunami

Coastal subsystems formed by interaction of various processes, impacted by natural hazards like tsunami and storms, pose irreversible morphological changes. Vellar estuary, located on the southeast coast of India, with huge sand dunes (of 3-6m height and spread to 560ha) and barrier islands, has undergone extensive morphological changes due to the giant Indian Ocean tsunami that occurred on 26th December 2004. The damage caused by the tsunami has been quantified using extensive field data collected during pre- and post-tsunami periods through Real Time Kinematic GPS (for mapping coastal features and beach profiles) and Geographic Information System (GIS) couple. The tsunami with a wave height as high as 4m not only inundated the entire coastal land up to a maximum of 2km but also eroded the sand dunes and deposited the eroded material at the inlet, which ultimately formed as a vast tidal flat spread over 31ha. The estuary has suffered immensely due to the tsunami especially in terms of (i) loss of natural protection barriers (sand dunes), which made this coastal area more vulnerable to storm attack, and (ii) shallowness of inlet creating hindrance to navigation of fishing vessels. Based on the observations made at Vellar coast and past recovery experiences of tsunami/hurricanes elsewhere in the world, we contend that the morphological loss might take at least two annual cycles to regain its original form and the rebuilding of sand dunes may even take a decade.