Oasis land-use change and its effects on the eco-environment in Yanqi Basin, Xinjiang, China

Satellite data and the published coefficients about the world's and China's ecosystem were used to analyze the effects of land-use changes on the ecosystem service in the Yanqi Basin. Both economic developments and arid, fragile ecosystems have strongly affected the land use. A sensitivity analysis determined the effect of manipulating the coefficients on the estimated values. Results indicated that (1) the total value of ecosystem services in the Yanqi Basin were 9,374.66, 10,450.52, 9,964.20, and 9,8707.77 million Yuan in 1990, 2000, 2005, and 2011, respectively. The net increase in ecosystem service values were about 496.11 million Yuan within 1990–2011; (2) The aggregated ecosystem service values of water body, wetlands, grasslands, and croplands were about 99.25 % of the total value; (3) Waste treatment and soil formation were the top two ecological functions with high service values and contributing about 61.70 % of the total service values; and (4) Ecosystem service values estimated in this study were inelastic with respect to the value coefficients; therefore, the estimation was robust in spite of uncertainties on the value coefficients. A reasonable land-use plan should be based on rigorous environmental impact analyses for maintaining stability and sustainable development of the Yanqi Basin.     

Intellectual capital,financial resources,and green supply chain management as predictors of financial and environmental performance

This research examines the influence of intellectual capital on financial and environmental performance with a mediating role of green supply chain management and a moderating role of financial resources. Structural model estimation was conducted on the data set of 324 Pakistani manufacturing SMEs and showed that intellectual capital significantly encourages green supply chain management as well as significantly contributes to financial and environmental performance. Green supply chain management partially mediates the relationship between intellectual capital and performance both the financial and environmental. Financial resources significantly strengthen the relationship between intellectual capital and green supply chain management. In light of the results, we suggest that firms should encourage intellectuality among their managers and employees to adopt green practices that can improve their financial and environmental performance. In addition, it is also suggested for managers and CEOs to effectively manage financial resources that are necessary for green practices.

     

Detection of Rotavirus Strains in Freshwater Clams in Japan

Bivalve molluscan shellfish like clams and oysters, etc., are capable to bioaccumulate surrounding contaminants from waters into their digestive systems and posing serious threats of food poisoning. Detection of rotaviruses (RVs) in shellfish is of particular importance because RVs are prone to genome reassortment resulting in the emergence of new RV variants that may compromise vaccine safety. Herein, we have detected the wild-type RVs and Rotarix/RotaTeq vaccine strains in freshwater clams collected on the riverside, Kawasaki city, from July 2019 to January 2020 and correlated the detected genotypes with that of gastroenteritis cases of nearby clinics to understand the transmission of RVs in the environment. The wild-type RVs were detected in 62 (64.6%) out of 96 freshwater clams in every study month: July, September, November, and January that are considered as off-season for RV infections. The most frequent genotypes were G2 (42.9%), G8 (28.6%), G3 (14.3%), G1 (7.1%), and G10 (7.1%), which remained comparable with genotypic distribution found in the clinical samples over the last few years indicating that these RVs may accumulate in clams since a long time. However, G10 genotype was detected in clam but not in clinical samples suggesting the presence of asymptomatic infection or RVs could be carried out from a long distance. Importantly, vaccine strains, RotaTeq (1%) but not Rotarix (0%), were also detected in a clam. Attention must be paid to monitoring the potential transmission of wild-type and vaccine RV strains in the environment to prevent the emergence of new variants generated from genome reassortment with vaccine strains.

     

Fate of coliforms and pathogenic parasite in four full-scale sewage treatment systems in India

Global positioning systems (GPS) are increasingly being used for habitat mapping because they provide spatially referenced data that can be used to characterize habitat structure across the landscape and document habitat change over time. We evaluated the accuracy of using a GPS for determining the size and location of habitat patches in a riverine environment. We simulated error attributable to a mapping-grade GPS receiver capable of achieving sub-meter accuracy onto discrete macrophyte bed and wood habitat patches (2 to 177 m(2)) that were digitized from an aerial photograph of the Laramie River, Wyoming, USA in a way that emulated field mapping. Patches with simulated error were compared to the original digitized patches. The accuracy in measuring habitat patches was affected most by patch size and less by patch shape and complexity. Perimeter length was consistently overestimated but was less biased for large, elongate patches with complex shapes. Patch area was slightly overestimated for small patches but was unbiased for large patches. Precision of area estimates was highest for large (>100 m(2)), elongate patches. Percent spatial overlap, a measure of the spatial accuracy of patch location, was low and variable for the smallest patches (2 to 5 m(2)). Mean percent spatial overlap was not related to patch shape but the precision of overlap was lower for small, elongate, and complex patches. Mapping habitat patches with a mapping-grade GPS can yield useful data, but research objectives will determine the acceptable amount of error and the smallest habitats that can be reliably measured.     

Source evaluation of physicochemically contaminated groundwater of Dera Ismail Khan area, Pakistan

Groundwater samples collected from Dera Ismail Khan, Pakistan, in 15 different stations were analyzed to determine the status of concentration of different physicochemical parameters. The samples were collected around a sugar mill in the study area. Sample location was selected on the basis of the flow of sugar mill effluents and groundwater. The samples were collected at random intervals in different villages. The physicochemical parameters such as pH, electrical conductivity (EC), total dissolved salts (TDS), TH, HCO₃, NO₃, SO₄, PO₄, Na, K, Ca, Mg, Fe, F, and Pb have been analyzed. The results showed that values of the tested parameters for EC, TDS, TH, HCO₃, SO₄, and Na near the sugar mill were very high, which indicate the descent of standard norms of quality and protection procedures for the groundwater around this area.     

Estimation and comparison of night-time OH levels in the UK urban atmosphere using two di erent analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods, the decay and steady state approximation methods. Measurement data from the UK National Environmental Technology Centre archive for four urban sites (Bristol, Harwell, London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study. Three reactive alkenes, namely isoprene, 1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method. Hourly measurements of NO, NO2, O3, CO and 20 VOCs were used to determine night-time OH level using the steady state approximation method. Our results showed that the night-time OH levels were in the range of 1 105–1 106 molecules/cm3 at these four urban sites in the UK. The application of a t-test of these analyses indicated that except Bristol, there was no significant di erence between the OH levels found from the decay and steady state approximation methods. Night-time levels of the OH radical appeared to peak in summer and spring time tracking the night-time O3 levels which also passed through a maximum at this time.     

The impact of different voltage application modes on biodegradation of chloramphenicol and shift of microbial community structure

● Presented coupled system enhanced biodegradation of antibiotic chloramphenicol. ● HRT and electrical stimulation modes were key influencing factors. ● Electrical stimulation had little effect on the chloramphenicol metabolic pathway. ● Microbial community structure varied with the voltage application mode. Exoelectrogenic biofilms have received considerable attention for their ability to enhance electron transfer between contaminants and electrodes in bioelectrochemical systems. In this study, we constructed anaerobic-aerobic-coupled upflow bioelectrochemical reactors (AO-UBERs) with different voltage application modes, voltages and hydraulic retention times (HRTs). In addition, we evaluated their capacity to remove chloramphenicol (CAP). AO-UBER can effectively mineralize CAP and its metabolites through electrical stimulation when an appropriate voltage is applied. The CAP removal efficiencies were ~81.1%±6.1% (intermittent voltage application mode) and 75.2%±4.6% (continuous voltage application mode) under 0.5 V supply voltage, which were ~21.5% and 15.6% greater than those in the control system without voltage applied, respectively. The removal efficiency is mainly attributed to the anaerobic chamber. High-throughput sequencing combined with catabolic pathway analysis indicated that electrical stimulation selectively enriched Megasphaera, Janthinobacterium, Pseudomonas, Emticicia, Zoogloea, Cloacibacterium and Cetobacterium, which are capable of denitrification, dechlorination and benzene ring cleavage, respectively. This study shows that under the intermittent voltage application mode, AO-UBERs are highly promising for treating antibiotic-contaminated wastewater.     

Maximising the net social benefit of the construction of post‐disaster alternative housing projects

The widespread destruction that follows large‐scale natural disasters, such as Hurricane Katrina in August 2005, challenges the efficacy of traditional temporary housing methods in providing adequate solutions to housing needs. Recognising these housing challenges, the Congress of the United States allocated, in 2006, USD 400 million to the Department of Homeland Security to support Alternative Housing Pilot Programs, which are intended to explore the possibilities of providing permanent and affordable housing to displaced families instead of traditional temporary housing. This paper presents a new methodology and optimisation model to identify the optimal configurations of post‐shelter housing arrangements to maximise the overall net socioeconomic benefit. The model is capable of quantifying and optimising the impacts of substituting temporary housing with alternative housing on the social and economic welfare of displaced families as well as the required additional costs of doing so. An application example is presented to illustrate the use of the model and its capabilities.     

Green synthesis and characterization of metal ions-mixed titania for application in dye-sensitized solar cells

Abstract

The objective of the present study is to synthesize various metal ions mixed TiO₂ nanoparticles using a continuous hydrothermal synthesis pilot reactor for dye-sensitized solar cells (DSCs). In the pilot plant, aqueous solutions of the metal salts are mixed with a flow of supercritical water (450?°C and 24.1?MPa) in a confined jet mixer for continuous synthesis of metal ions-mixed nano-titania. Characterization of the particles was made using Brunauer–Emmett–Teller technique for specific surface area, powder X-ray diffraction analysis and transmission electron microscopy for identification and crystallite size, X-ray photoelectron spectroscopy for surface analysis and infrared spectroscopy for distinct group identification. Following the already existing procedures and using the titanates synthesized, dye-sensitized cells of 1?cm² area were assembled and their photovoltaic parameters were evaluated under standard test conditions. The power conversion efficiencies (η %) for 40?mol % Zn²⁺, 5?mol % Zr⁴⁺ and 10?mol % Zn⁴⁺ titania were obtained to be 4.8, 4.95 and 4.9, respectively. The promising efficiency results from a greener and large-scale production of nano-titania is a step forward towards commercializing DSC technology.