Influence of tourism,governance, and foreign direct investment on energy consumption and CO2 emissions: a panel analysis of Muslim countries

The empirical linkages from tourism, governance, and FDI have been quantified on CO₂ emission and energy use over 2002–2014 for a panel of 13 Muslim countries. To this end, we have examined the data for cross-sectional dependence (CD) and panel heterogeneity and employed panel algorithms, which account for both CD and panel heterogeneity. The results from Pedroni, Westerlund, and Kao tests supported the existence of a cointegration association between the chosen variables. In the CO₂ model, we observed that tourism positively, and governance negatively, influences the CO₂ emission. However, in the case of the energy model, the results of tourism pose a negative relationship, and governance indicates a positive relationship with energy use. The results supported the pollution haven phenomenon, finance, and energy triggered pollution in the study area. Further, the research supported a two-way causality between tourism and CO₂, where there is a unilateral causality from governance to CO₂. Similarly, a unidirectional causality was obtained from energy towards tourism. Lastly, the key policy recommendations based on the outcomes of the study are encouraging clean energy investment, enhancing good governance, and sustainable tourism development for improving environmental quality.

     

Potential health hazard of drinking water in restaurants and tea stalls

Potable and equitable drinking water (DW) is a fundamental human right and essential for human health. This study is conducted to assess the groundwater and jar water quality of the roadside restaurants and tea stalls used for drinking by the local people around the Gazipur City area in Bangladesh. Water samples from 173 restaurants and tea stalls are collected. The physico-chemical and biological parameters are analyzed according to the guidelines and standards. The results illustrate that the color, EC, and Mn of 41%, 80%, and 62% of the samples, respectively, exceed the WHO and Environmental Conservation Rules (ECR) standards. In addition, E. coli and total coliform exceeding the threshold standards are found in 47% and 64% of the water samples, respectively. The contamination of DW by fecal coliforms is confirmed and supported by prior studies, which indicates that the DW supplied in restaurants and tea stalls are unsafe because of the possible presence of pathogens. These may cause potential health hazards to consumers from various water-borne diseases. Poor sanitation, unhygienic practices, and improper disposal of wastewater are responsible for the microbial contamination of DW. So, the authorities in charge of these places should take the right regulatory steps, such as regular sanitation inspections, DW quality monitoring, hand-washing practices, and better sanitation in these places.     

Fluoride Concentration in Drinking Water of Karachi City (Pakistan)

The ground and municipal water supply samples of Karachi city were analyzed for their fluoride contents. The fluoride contents in water samples collected from the subsurface and river sources were found below the WHO recommended value for the general health of the people. However, in some industrial areas the groundwater sample showed higher level of fluoride concentration. Continuous monitoring of water resources and cautious fluoridation is suggested to maintain proper status of fluoride concentration in the drinking water.     

Modelling the potential impacts of land use/cover change on terrestrial carbon stocks in north-west Morocco

Terrestrial ecosystems store more carbon (C) than the atmosphere and provide ecosystem services (ES) such as global climate regulation, by sequestering carbon within biomass and soil. Land use land cover (LULC) change is considered a key factor, playing an important role in the dynamic variations of carbon storage. The aim of this paper is to assess the effects that LULC has had on carbon stocks and consequently on climate change regulation in north-western Morocco over 21 years. To achieve this aim, the Integrated Valuation of ES and Trade-offs (InVEST) model is used to assess status and variation in the net amount of carbon stored by the different types of LULC, and the economic value of the carbon sequestered in the remaining stock. The results show that the total carbon stock increased from 4.81TgC in 1996 to 4.98TgC in 2017. Over the 21 years, the LULC changes had the greatest effect on carbon storage - an increase of 6.87% with 0.17TgC of carbon sequestered, since the majority of unused land was changed to forest and cultivated land. Based on the global costs of atmospheric carbon, we estimate the economic value of carbon storage services to be between US$1,800,000 and US$3,570,000 for the whole period, with an average yearly increment of between US$86,000 and US$170,000. The results show that the ecosystem management has had a substantial climate mitigation effect. Also, the possibility of paying for ES could inform policy on the adoption of LULC to support livelihood and management choices.     

Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles

Environmental Chemistry Letters - The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of...     

Measuring the association of environmental,corporate, financial,and social CSR: evidence from fuzzy TOPSIS nexus in emerging economies

Environmental Science and Pollution Research - The purpose of this research is to measure the combing impact of corporate social responsibility on company performance and to conduct a comparative...     

Risk-optimal highway design: Methodology and case studies

Highway geometric design in mountainous areas has been a typical challenge. The combination of short horizontal curves and restricted right-of-way is a common ground for contemplating design exception in British Columbia, Canada. In practice, collision modification factors (CMFs) are advocated as quantitative measures of changes in road features on safety. However, in many situations, there are no CMFs in the literature to predict the safety impact of changing particular road features. An important example of these road features is sight distance restriction on horizontal curves. A mechanism for risk measurement has been proposed in earlier work to assist designers in comparing the safety impact of different deviations from sight distance requirements. This paper attempts to answer the questions as to whether it is possible to reduce overall risk and achieve consistency in such reduction without demanding wider right-of-way. This problem was formulated in a multi-objective optimization framework. Following this methodology, it was possible to achieve an average reduction in risk of 25% on the nine critical cross-sections. This reduction in risk was achieved without demanding wider right-of-way and without creating measurable increase in expected collision frequency due to independent re-dimensioning of different geometric elements. On theoretical grounds, this paper represents another step into the direction of developing fully probabilistic geometric design standards. On practical grounds, this paper provides an important decision mechanism that enables the efficient use of available right-of-way for new highway construction. Case studies in this paper have been applied on a major highway development in British Columba, Canada.     

Measuring direct and indirect treatment effects using safety performance intervention functions

Recent traffic safety research has advocated the use of the Full Bayes (FB) approach to conduct controlled before-after safety evaluations. The FB approach was shown to offer both methodological and data advantages. However, there is still a lack of complete understanding of the role that the model parameters play in the formulation of treatment effectiveness. This paper offers a novel approach to compute components related to direct and indirect treatment effects under a linear intervention model for the Safety Performance Function (SPF). The isolation of a component corresponding to the direct treatment effects enables the analyst to assess the effectiveness of the countermeasures apart from local (site-related) environmental factors. Two case studies are used to demonstrate the approach. The first case study is based on the results published from a previous safety evaluation in Iowa and the second uses a new data set from British Columbia based on the Insurance Corporation of British Columbia Road Improvement Program. The various direct and indirect components have yielded valuable insight into the effects of the model parameters on treatment impacts. Moreover, the calculation of the treatment effectiveness indices have been simplified by providing straightforward equations in terms of model parameters for the computation of their components without resorting to additional algorithms. More importantly, the results can have a significant impact on the economic evaluation of safety programs and countermeasures by allowing the calculation of collision modification factors (CMFs) that vary with time.     

Effect of PCM on temperature fluctuation during the door opening of a household refrigerator

Temperature fluctuation inside the cabinet of a household refrigerator significantly affects the quality of preserved food. Phase change material (PCM) is a latent heat storage system that can store and release the heat energy by changing its phase from liquid to solid and solid to liquid respectively. Therefore, use of PCM inside the refrigerator cabinet has the potential for minimizing the temperature fluctuation during the door opening and the power failure. However, very few studies in the literature were dedicated to investigating the role of PCM to reduce the temperature fluctuation. The aim of this work is to experimentally investigate the effects of PCM on temperature fluctuation inside the cabinet of a household refrigerator during the door opening and power failure. The results found that a significantly lower temperature fluctuation can be obtained using PCM. It was found that during the door opening condition the air temperature in the cabinet rose rapidly. However, when a PCM container was used, temperature variation was reduced to 3–5°C. During the power failure, the system with PCM maintained a lower temperature inside the storage chamber for a long period of time (about 2 hours). Moreover, the test results indicate that PCM maintains more stable temperature in the foodstuffs inside the refrigerator. This reduction of temperature fluctuation ultimately improves the quality of preserved food.     

Plant stature of aromatic rice genotypes in the environment of Bangladesh

Plant stature of a rice crop is an important selection criterion. As plant height is a quantitative trait it is influenced by environmental conditions. A field experiment was conducted with 40 rice genotypes to assess the fluctuation and stability of plant height in a series of 16 environmental situations. The effects of genotype (G), environment (E) and all the components of GxE interaction were highly significant. Among the genotypes, Jamai sohagi was extremely sensitive (bi = 1.37) to environmental changes, and indicating lowest adaptability over the environments. Plant height of seven genotypes viz. Basmati PNR346, Benaful, BRRIdhan28, BRRIdhan38, BRRIdhan39, Gandho kasturi and Neimat, having the bi values between 0.59 and 0.72, showed high stability against environmental changes. The otherseven genotypes viz. Badshabhog, Basmati Tapl-90, Kamini soru, Khazar, Laljira, Sarwati and Ukni madhu expressed only nonlinear sensitivity (S2di = 90-181)) and thus unpredictable fluctuation. Twenty one genotypes indicated their average stability (bi = 0.91-1.15) over the environments.