Photocatalytic Oxidation of Volatile Organic Compounds Using Fluorescent Visible Light

Abstract

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO₂) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was <850 ppm_v. This indicates that PCO leading to CO₂ and H₂O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm_v. In a search for a material with photoactivation extended to higher wavelengths or increased photo-activity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO₂ as well as SrTi_1xFe_xO₃ (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO₂. The results of this study open new horizons in the area of indoor air quality (IAQ) control.     

Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

From Waste to Reuse: Manufacture of Ecological Composites Based on Biopolyethylene/wood Powder with PE-g-MA and Macaíba Oil

Journal of Polymers and the Environment - This work aimed to investigate the biopolyethylene (BioPE)/wood powder (WP) composites compatibilized with polyethylene-grafted maleic anhydride (PE-g-MA),...     

Biogeochemistry and cycling of zinc and copper in a dyked seasonally flooded savanna

There is very little information on the cycling of heavy metals in natural savannas. Venezuelan flooded savannas are characterised by acid soils with redox conditions which might induce Zn and Cu solubilisation. In those flooded savannas a network of small dykes has been constructed to control floods. The biomass accretion after dyking and the abundance of clay particles in the vertisols, dominant in the overflow plains, might be responsible for an increase in nutrient uptake and immobilisation. Due to the redox and pH conditions prevailing during flooding, some questions arise on the fate of the heavy metals. Are they significantly lost as soluble and particulate forms, which in turn, can induce a potential risk of microelement deficiency? Or, on the contrary, are heavy metal inputs in precipitation waters retained somewhere in the terrestrial pools of the watershed allowing for an adequate micronutrient economy? By using input-output budgets, which consider the total atmospheric input and total output in stream runoff (soluble and particulate) for zinc and copper we concluded that in Mantecal flooded savannas, a net accumulation of micronutrient in soils is actually occurring through organic and inorganic complexes, a process that is counterbalanced by the losses of particulates through erosion.     

A novel holistic framework for genetic‐based captive‐breeding and reintroduction programs

Research in reintroduction biology has provided a greater understanding of the often limited success of species reintroductions and highlighted the need for scientifically rigorous approaches in reintroduction programs. We examined the recent genetic‐based captive‐breeding and reintroduction literature to showcase the underuse of the genetic data gathered. We devised a framework that takes full advantage of the genetic data through assessment of the genetic makeup of populations before (past component of the framework), during (present component), and after (future component) captive‐breeding and reintroduction events to understand their conservation potential and maximize their success. We empirically applied our framework to two small fishes: Yarra pygmy perch (Nannoperca obscura) and southern pygmy perch (Nannoperca australis). Each of these species has a locally adapted and geographically isolated lineage that is endemic to the highly threatened lower Murray–Darling Basin in Australia. These two populations were rescued during Australia's recent decade‐long Millennium Drought, when their persistence became entirely dependent on captive‐breeding and subsequent reintroduction efforts. Using historical demographic analyses, we found differences and similarities between the species in the genetic impacts of past natural and anthropogenic events that occurred in situ, such as European settlement (past component). Subsequently, successful maintenance of genetic diversity in captivity—despite skewed brooder contribution to offspring—was achieved through carefully managed genetic‐based breeding (present component). Finally, genetic monitoring revealed the survival and recruitment of released captive‐bred offspring in the wild (future component). Our holistic framework often requires no additional data collection to that typically gathered in genetic‐based breeding programs, is applicable to a wide range of species, advances the genetic considerations of reintroduction programs, and is expected to improve with the use of next‐generation sequencing technology.     

Combining land-use planning and tenure security: a tenure responsive land-use planning approach for developing countries

There is tenure insecurity around land ownerships and land rights in most developing countries. There are also many land-use planning projects being implemented in these countries. Often, land-use planning exists in these countries but is not formally linked with tenure security. This study argues that combining them by conducting land-use planning in a way that promotes tenure security presents a new approach. A central premise for the rationale of this intervention is that processes of land-use planning may inadvertently increase tenure security. By way of methodology, it evaluates land-use planning case studies from Africa, Asia and South America. It uses the three case study examples to build a case for making tenure security one of the major planned outcomes of a land-use planning process and provides a detailed framework for operationalising the concept. Its main contribution to the literature is that it introduces the concept of tenure responsive land-use planning.     

The Impact of the Macaíba Components Addition on the Biodegradation Acceleration of Poly (Ɛ-Caprolactone) (PCL)

Journal of Polymers and the Environment - Nowadays, there is a need to obtain eco-friendly materials, especially plastics that are responsible for most of the environmental pollution. In this...     

Estimation of measurement uncertainty associated to the determination of pesticide residues: a case study

In the analytical analysis the measurement uncertainty is a quantitative indicator of the confidence describing the range around a reported or experimental result within which the true value can be expected. Several approaches can be used to estimate the measurement uncertainty associated to the analysis of pesticide residues: a) the top-down, the estimation can be referred to default values; b) the bottom-up the estimation is related to the uncertainty sources. Concerning the bottom-up approach, the following contributions have been investigated: weight of sample, calibration solutions, final volume of sample and intermediate repeatability studies. The commodity/residue combination selected in this study was celery/tau-fluvalinate pesticide. Tau-fluvalinate is a broad-spectrum insecticide in the pyrethroid class of pesticides. The Maximum Residue Limit (MRL) of tau-fluvalinate in celery has been set at 0.01 mg/kg. The tau- Fluvalinate showed two chromatographic peaks. Since the individual standards are not available, the two peaks were integrated separately and the instrumental responses were added. The total residue was calculated on the basis of resulted peaks. The present work aims to compare the uncertainty estimated by experimental data using repeated analysis (n = 12) of a real sample and a spiked sample. The relative expanded uncertainty for two data set, incurred and spiked, was 22 % and 20 %, respectively. No differences were observed from repeated determinations of real samples and spiked samples.