Anaerobic degradation of naphthalene in a fluvial aquifer: a radiotracer study

A radiotracer study was conducted in a creosote-contaminated aquifer beneath the Fraser River, British Columbia Canada to investigate the in situ degradation of naphthalene. The groundwater is anaerobic, with abundant methane, ferrous iron and carbon dioxide. This study followed earlier work at the site where the contaminant distribution could only be explained by invoking a mass loss through degradation, even though extensive field and laboratory microcosm studies closer to the source zone onshore could not confirm degradation. Accordingly, 14C-naphthalene was injected into the aquifer offshore, further from the source zone where modeling suggested degradation was occurring. During the 230-day monitoring period, 14CO2 was detected, confirming the degradation of the radio-labeled naphthalene tracer. A zero-order degradation rate of naphthalene of 5 microg/L-day was estimated based on the decrease in 14C-naphthalene concentration with time. While the degradation pathway could not be determined from the radiotracer study alone, the geochemistry of the site suggests that either iron reduction or methanogenesis is the terminal electron accepting processes responsible for naphthalene oxidation.     

Evaluation of Metric Precision for a Riparian Forest Survey

This article evaluates the performance of a protocol to monitor riparian forests in western Oregon, United States based on thequality of the data obtained from a field survey. Precision isthe criteria used to determine the quality of 19 field and 6 derived metrics. The derived metrics were calculated from thefield data. The survey consisted of 110 riparian sites on publicand private lands that were sampled during the summers of 1996 and 1997. In order to calculate metric precision, some of the field plots were re-measured. Metric precision was defined in terms of the coefficient of variability (CV) and standard deviation and then compared with a pre-defined data quality objective (DQO). A metric was considered precise if the CV met or exceeded the DQO. The geomorphology metrics were not precisewhile the forest stand inventory metrics and forest cover metrics, with some exceptions, were precise. The precision formany of the field and derived metrics compared favorably withthe level of precision for similar metrics reported in the literature. Recommendations are made to improve the precision for some metrics and they include changing the way precision is calculated, re-defining the field protocol, or improving field training.     

Function of the mating plug in Drosophila hibisci Bock

The mating plug in Drosophila hibisci Bock is a firm, gelatinous structure that forms within the female’s uterus during copulation. Two non-mutually exclusive hypotheses for the function of the plug were evaluated. The plug may serve as a nutritional gift that females digest, using the constituents for somatic maintenance or to provision eggs as they mature within the ovaries. Alternatively, the plug may act as a chastity enforcement device by preventing subsequent copulations, and thereby reducing sperm competition. Plug size did not decrease within females over a period of 2 days, and dietary treatment in females did not affect plug size. The extent of ovarian provisioning was also not related to plug size. These results weaken the nutritional gift hypothesis. In contrast, the probability of a second copulation increased sharply with an experimental decrease in plug size. Moreover, females with plugs experimentally reduced in size were courted significantly more and mated significantly faster than females with larger plugs. These results support the chastity enforcement hypothesis. The plug retains the ejaculate and concentrates sperm at the anterior end of the uterus near the apertures of the sperm storage organs. The presence of the plug thus probably facilitates the movement of sperm into storage by retaining sperm at the anterior end of the uterus near the apertures of the sperm storage organs, which may be especially important for D. hibisci, in which sperm length is nearly twofold greater than ventral receptacle length. Matings with newly eclosed virgin females were significantly shorter than with older virgins, and copulations with the younger virgins ended more often without any sperm having yet entered into storage. The effectiveness of the plug in safeguarding a male’s ejaculate may have favoured the evolution of shortened copula durations with young virgins. One fitness advantage of shortened copula duration could be time liberated for the pursuit of further mating opportunities. Received: 12 May 2000 / Revised: 22 September 2000 / Accepted: 15 October 2000     

Estimating the Density of Honeybee Colonies across Their Natural Range to Fill the Gap in Pollinator Decline Censuses

Abstract: Although pollinator declines are a global biodiversity threat, the demography of the western honeybee (Apis mellifera) has not been considered by conservationists because it is biased by the activity of beekeepers. To fill this gap in pollinator decline censuses and to provide a broad picture of the current status of honeybees across their natural range, we used microsatellite genetic markers to estimate colony densities and genetic diversity at different locations in Europe, Africa, and central Asia that had different patterns of land use. Genetic diversity and colony densities were highest in South Africa and lowest in Northern Europe and were correlated with mean annual temperature. Confounding factors not related to climate, however, are also likely to influence genetic diversity and colony densities in honeybee populations. Land use showed a significantly negative influence over genetic diversity and the density of honeybee colonies over all sampling locations. In Europe honeybees sampled in nature reserves had genetic diversity and colony densities similar to those sampled in agricultural landscapes, which suggests that the former are not wild but may have come from managed hives. Other results also support this idea: putative wild bees were rare in our European samples, and the mean estimated density of honeybee colonies on the continent closely resembled the reported mean number of managed hives. Current densities of European honeybee populations are in the same range as those found in the adverse climatic conditions of the Kalahari and Saharan deserts, which suggests that beekeeping activities do not compensate for the loss of wild colonies. Our findings highlight the importance of reconsidering the conservation status of honeybees in Europe and of regarding beekeeping not only as a profitable business for producing honey, but also as an essential component of biodiversity conservation.     

Nuclear magnetic resonance logging: Example applications of an emerging tool for environmental investigations

Nuclear magnetic resonance (NMR) geophysical tools have been widely used in the petroleum exploration industry since the 1960s and have improved significantly in the last two decades. These tools can provide estimates of bulk porosity and fluid content, quantification of bound versus mobile fluids, and estimates of hydraulic conductivity (K). Although the size and cost of oil‐field tools historically limited their use for near‐surface applications, smaller and more economical downhole NMR logging tools are now available for detecting and characterizing the formation water content and K to support environmental and groundwater resource investigations. These tools can be deployed using direct‐push drilling techniques or they can be lowered into existing open borings or wells with nonconductive polyvinyl chloride casings and screens. In many cases, using the tool in existing wells offers a safer and more cost‐effective alternative compared to drilling new boreholes. For environmental investigations, NMR can provide useful high‐resolution quantitative hydrostratigraphic information that can provide additional valuable data to further inform and refine the conceptual site model. This paper highlights several NMR field investigations that demonstrate the viability of this technology as a site characterization tool for near‐surface investigations. NMR measurements were compared to data from lithologic logs, cone penetrometer testing data, and prior field hydraulic tests. Use of NMR to detect vadose zone water, including previously unidentified perched groundwater zones, provided hydrostratigraphic details that could not be gleaned from historical well drilling logs and were used to evaluate drainable pore water versus pore water bound in small pores by capillary forces or electrochemically clay‐bond water. NMR also produced K estimates similar to those from conventional hydraulic tests, but the improved vertical resolution from NMR provided additional information regarding the vertical heterogeneity of the formation along the entire length of the well or borehole. Additionally, bench‐scale tests are presented that confirm the capability for NMR to reliably detect and quantify light nonaqueous phase liquid saturation (specifically diesel fuel and weathered gasoline) in situ. The field tests combined with bench‐scale testing results affirm the applicability and potential for NMR as a practical characterization tool that should increasingly be utilized in environmental investigations.     

Novel process concept for the production of H2 and H2SO4 by SO2-depolarized electrolysis

Outotec open cycle (OOC) is a new low-energy process linking together production of hydrogen and sulfuric acid. While sulfuric acid is the world’s most widely produced chemical by mass at approximately 200 Mt/a, the OOC gives the potential for making 4 Mt/a of hydrogen gas as a by-product. H₂SO₄ manufacture requires a source of sulfur dioxide. 30% of world production of H₂SO₄ is from the SO₂ by-product of pyrometallurgical processing of sulfur containing concentrates of metals such as copper, nickel and zinc. SO₂ can also be made by direct combustion of sulfur. In OOC, a divided electrochemical cell is used for SO₂-depolarized electrolysis of water. SO₂ is fed to the anolyte and converted to H₂SO₄, while hydrogen gas is produced at the cathode. On the industrial scale, the equipment will be in the form of a membrane electrolyzer assembly or stack. A case is described where the OOC would be connected to a pyrometallurgical plant smelting 1 Mt/a of nickel and copper concentrate, producing 1 Mt/a of H₂SO₄ and 20 kt/a of hydrogen.     

Environmentally Virtuous Agriculture: How and When External Goods and Humility Ethically Constrain (or Favour) Technology Use

This paper concerns virtue-based ethical principles that bear upon agricultural uses of technologies, such as GM crops and CRISPR crops. It does three things. First, it argues for a new type of virtue ethics approach to such cases. Typical virtue ethics principles are vague and unspecific. These are sometimes useful, but we show how to supplement them with more specific virtue ethics principles that are useful to people working in specific applied domains, where morally relevant domain-specific conditions recur. We do this while still fulfilling the need for principles and associated practical reasoning to flexibly respect variation between cases. Second, with our more detailed approach we criticize and improve upon a commonly discussed principle about ecosystemic external goods that are crucial for human flourishing. We show this principle is far more conservative than appreciated, as it would prohibit many technology uses that are uncontroversially acceptable. We then replace this principle with two more specific ones. One identifies specific conditions in which ecosystem considerations are against a technology use, the other identifies favorable conditions. Third, we uncover a humility-based principle that operates within an influential “hubris argument” against uses of several biotechnologies in agriculture. These arguments lack a substantive theory of the nature of humility. We clarify such a theory, and then use it to replace the uncovered humility-based principle with our own more specific one that shifts focus from past moral failings, to current epistemic limits when deciding whether to support new technologies.     

Examination of the effects of disturbance on birds with reference to its importance in ecological assessments

National, European and International legislation regarding the conservation of species and habitats requires professional statements to be made in respect of land use change, as, for example, illustrated by developments. Some developments may cause disturbance to wildlife. Knowledge of the way in which species respond to disturbance has been fragmented, yet is an important consideration in environmental impact assessments. This paper reviews what is known about disturbance factors on the best studied group, birds. A set of extensive appendices summarize the literature on disturbance effects on breeding, breeding success, nest-site choice, population density, community structure, distribution and habitat use. The paper considers human-induced disturbance, public access, water-based recreation, shooting and industrial developments. Mitigation measures are discussed.Human-induced disturbance can have a significant negative effect on breeding success by causing nest abandonment and increased predation. Outside the breeding season, recreation (particularly power boating, sailing and coarse fishing on wetlands) reduces the use of sites by birds. Compensatory feeding at night by some species can probably recoup some of the energy losses caused by disturbance. Public and vehicular access to open landscapes has been shown negatively to affect grazing geese in winter and lowland and upland waders during breeding. Shooting disturbance has been shown to be most important for herbivore feeders which need to spend long periods of the day feeding in order to maintain their energy balance, e.g. wigeon. The provision of refuges devoid of shooting has been fundamental in attracting wildfowl away from non-refuge sites. The response of birds to scaring devices and other control measures is discussed.Effects from industrial developments include direct loss of habitat, disturbance through the presence of humans during the construction process and the presence of artificial light used to illuminate construction sites. On estuaries, engineering operations should avoid the proximity to established roost sites of wading birds. A number of studies showed increased vigilance (and hence reduced feeding time) in flock members feeding near structures which impede their vision of the approach of potential predators.A number of principal management techniques used to reduce disturbance on a site, or to attempt to compensate for habitat loss, are given. For wetland sites, these include excavating new shallow lagoons and grading bank sides, flooding of low-lying pasture, reducing salinity levels in coastal lagoons thereby making them more attractive to the birds' food invertebrates, manipulating water levels to expose mud regularly and creating feeding areas for geese and wigeon, using manipulative livestock grazing. Also used are increasing nesting cover, planting macrophytes, providing islands, spits and promontories, purchasing more land to make a refuge bigger, concealing observers with banks and screens, zoning activities and prohibiting access and avoiding the obstruction of flyways between feeding and roosting areas.