One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.     

Mechanical Properties of Layered Laminated Woven Bamboo <Emphasis Type="Italic">Gigantochloa Scortechinii</Emphasis>/Epoxy Composites

This study investigated the application of bamboo as a natural composite, in which its potential as a composite material had been examined for 2–6 layers. In precise, the woven bamboo (BW) formed the culm fiber composite with an average of 0.5 mm thickness and 5.0 mm width strip. In addition, this study looked into a specific type of bamboo species known as Gigantochloa Scortechinii (Buluh Semantan), which can be found in Malaysia. This laminated plain BW, which had been reinforced with epoxy (EP), was developed by applying the hand lay-up technique. After that, the specimens were characterized via mechanical analyses, for instance, tensile, flexural, hardness, and impact tests. As a result, the 2-layer BW had displayed rather excellent results chiefly due to the incorporation of epoxy composite, although this is exceptional hardness value.     

网状季胺基阴离子吸附剂制备及吸附性能

以丝瓜络为原料,采用醚化-接枝技术制备出季胺基阴离子交换吸附剂。采用电镜扫描、傅里叶红外光谱、比表面积孔径分布测定仪和元素分析仪等仪器对其进行分析和结构表征,并考察了温度、p H和硝酸盐初始浓度等因素对NO-3去除率的影响。实验结果表明,在20℃,p H值为3~10时,NO-3的吸附率可达90%左右;在不同温度下该吸附过程用Langmuir等温线模型和Freundich等温线模型描述均可;与伪一级动力学方程相比,伪二级动力学方程能更好地描述其吸附动力学方程。     

Analysis and optimization on the biodegradable plate making process parameters using RSM-based Box–Behnken Design method

Journal of Material Cycles and Waste Management - The present research work focused on fabricating Biodegradable Plate (BD plate) composed of rice husk ash, bagasse and corn starch which is...     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

Pastoralists in a changing environment: The competition for grazing land in and around the W Biosphere Reserve,Benin Republic

Pastoralists face increasing competition for land with crop farmers and nature in and around the W Biosphere Reserve (WBR) in Benin. Our aim was to describe and analyse land use changes in order to understand their drivers, and to describe and analyse the viewpoints of relevant stakeholders in order to understand the competition for land. To this end, remote sensing data, regional statistics, and survey data were collected. We found that crop land expansion around the WBR was the direct driver of decrease of the grazing land area. Population growth and rising demand for food crops, and government support to the cotton sector were indirect drivers of grazing land reduction. Furthermore, competing claims on land among users arose from the complex interaction of crop expansion, presence of WBR and the way it is governed, the lack of support to pastoralists, and the increasing shift of pastoralists’ lifestyle into one of settled crop farmers. Pastoralism is under threat and its survival depends on the successful implementation of policies to support pastoralists and protect grazing lands.     

The Response of Hydrophytes to Environmental Pollution with Heavy Metals

The effects of Cu²⁺, Cd²⁺, and Ni²⁺ at low and high concentrations (0.025 and 0.25 mg/ml) on the accumulation capacity, the state of the pigment complex, and photosynthesis rate have been studied in model experiments with three floating hydrophytes (Hydrocharis morsus-ranae L., Lemna gibba L., and Potamogeton natans L.) and four submerged hydrophytes (Elodea canadensis Michx., Lemna trisulka L., Ceratophyllum demersum L., and Potamogeton lucens L.). Copper and cadmium are especially toxic at the concentrations studied. The effect of Cu²⁺ was the strongest in hydatophytes, and the effect of Cd²⁺, in pleustophytes. It is hypothesized that the differences between hydrophytes with respect to accumulation of metals and decrease in photosynthesis rate may cause predominant elimination of submerged species. Therefore, changes in the species structure of hydrophyte communities may be expected in waters polluted with metals.     

Effects of Coastal Lighting on Foraging Behaviorof Beach Mice

Abstract:  Introduction of artificial light into wildlife habitat represents a rapidly expanding form of human encroachment, particularly in coastal systems. Light pollution alters the behavior of sea turtles during nesting; therefore, long-wavelength lights—low-pressure sodium vapor and bug lights—that minimize impacts on turtles are required for beach lighting in Florida (U.S.A.). We investigated the effects of these two kinds of lights on the foraging behavior of Santa Rosa beach mice (  Peromyscus polionotus leucocephalus ). We compared patch use and giving-up densities of mice for experimental food patches established along a gradient of artificial light in the field. Mice exploited fewer food patches near both types of artificial light than in areas with little light and harvested fewer seeds within patches near bug lights. Our results show that artificial light affects the behavior of terrestrial species in coastal areas and that light pollution deserves greater consideration in conservation planning.