Interaction effects of organic load and cycle time in an AsBr applied to a personal care industry wastewater treatment

A mechanically stirred anaerobic sequencing batch reactor (ASBR) containing granular biomass was applied to the treatment of a wastewater simulating the effluent from a personal care industry. The ASBR was operated with cycle lengths (t_C) of 8, 12 and 24 h and applied volumetric organic loads (AVOL) of 0.75, 0.50 and 0.25 gCOD/L.d, treating 2.0 L liquid medium per cycle. Stirring frequency was 150 rpm and the reactor was kept in an isothermal chamber at 30 °C. Increase in t_C resulted in efficiency increase at constant AVOL, reaching 77% at t_C of 24 h versus 69% at t_C of 8 h. However, efficiency decreased when AVOL decreased as a function of increasing t_C, due to the lack of substrate in the reaction medium. Moreover, replacing part of the wastewater by a chemically balanced synthetic one did not yield the expected effect and system efficiency dropped.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.     

Dental microwear patterns of extant and extinct Muridae (Rodentia, Mammalia): ecological implications

Extant species of Muridae occupy a wide array of habitats and have diverse dietary habits. Consequently, their dental microwear patterns represent a potential clue to better understand the paleoecology of their extinct relatives, which are abundant in many Old World Neogene localities. In this study, dental microwear is investigated for specimens of 17 extant species of murine and deomyine rodents in order to test the reliability of this method and infer dietary preferences on the fossil species Saïdomys afarensis. This extinct form comes from a mid-Pliocene site (AL 327) located at the Hadar Formation (Ethiopia) known to have delivered many hominid specimens of Australopithecus afarensis. A significant correlation between microwear patterns and diet is detected. Thus, grass, fruit, and insect eaters display, respectively, high amounts of fine scratches, wide scratches, and large pits. Moreover, some aspects of the paleoecology of S. afarensis, including feeding habits, could be assessed in regard to its dental microwear pattern. Indeed, it probably had feeding habits similar to that of living grass eaters. These results concur with the presence of open to woodland areas covered by an herbaceous vegetal layer, including monocotyledons, in the vicinity of this mid-Pliocene locality.     

Global Urban Growth and the Geography of Water Availability,Quality, and Delivery

Globally, urban growth will add 1.5 billion people to cities by 2030, making the difficult task of urban water provisions even more challenging. In this article, we develop a conceptual framework of urban water provision as composed of three axes: water availability, water quality, and water delivery. For each axis, we calculate quantitative proxy measures for all cities with more than 50,000 residents, and then briefly discuss the strategies cities are using in response if they are deficient on one of the axes. We show that 523 million people are in cities where water availability may be an issue, 890 million people are in cities where water quality may be an issue, and 1.3 billion people are in cities where water delivery may be an issue. Tapping into groundwater is a widespread response, regardless of the management challenge, with many cities unsustainably using this resource. The strategies used by cities deficient on the water delivery axis are different than for cities deficient on the water quantity or water quality axis, as lack of financial resources pushes cities toward a different and potentially less effective set of strategies.     

Improving the sampling strategy of the Joint Danube Survey 3 (2013) by means of multivariate statistical techniques applied on selected physico-chemical and biological data

The concept of basin-wide Joint Danube Survey (JDS) was launched by the International Commission for the Protection of the Danube River (ICPDR) as a tool for investigative monitoring under the Water Framework Directive (WFD), with a frequency of 6 years. The first JDS was carried out in 2001 and its success in providing key information for characterisation of the Danube River Basin District as required by WFD lead to the organisation of the second JDS in 2007, which was the world’s biggest river research expedition in that year. The present paper presents an approach for improving the survey strategy for the next planned survey JDS3 (2013) by means of several multivariate statistical techniques. In order to design the optimum structure in terms of parameters and sampling sites, principal component analysis (PCA), factor analysis (FA) and cluster analysis were applied on JDS2 data for 13 selected physico-chemical and one biological element measured in 78 sampling sites located on the main course of the Danube. Results from PCA/FA showed that most of the dataset variance (above 75 %) was explained by five varifactors loaded with 8 out of 14 variables: physical (transparency and total suspended solids), relevant nutrients (N–nitrates and P–orthophosphates), feedback effects of primary production (pH, alkalinity and dissolved oxygen) and algal biomass. Taking into account the representation of the factor scores given by FA versus sampling sites and the major groups generated by the clustering procedure, the spatial network of the next survey could be carefully tailored, leading to a decreasing of sampling sites by more than 30 %. The approach of target oriented sampling strategy based on the selected multivariate statistics can provide a strong reduction in dimensionality of the original data and corresponding costs as well, without any loss of information.     

Butyltin levels in several Portuguese coastal areas

This work aimed to report present levels (2007–2008 sampling) of tri- (TBT), di- (DBT), and monobutyltin (MBT) in surface sediments from 11 Portuguese coastal sites and discuss the evolution of BTs contamination in the last two decades. All the samples revealed quantifiable values of TBT, DBT, and MBT with total butyltin concentrations between 1 and 565 ng/g (of Sn in dry sediment). Maximum level of TBT, 66 ng/g, was observed in Sado estuary, at Lisnave site, in the proximity of a big shipyard. MBT decreased site by site by the same order as DBT and TBT did, but its concentrations were much higher in many cases, denoting that TBT contamination was much higher in the past. A comparison with the available previous data confirmed a marked decrease of TBT contamination all over the last years, indicating that the main sources of TBT in Portuguese coastwise stopped effectively.     

Trisomy 2 due to a 3:1 segregation in an abortion studied by QF-PCR and CGH

Balanced reciprocal translocation is one of the known causes of recurrent spontaneous abortions. Cytogenetic studies of unbalanced miscarriages are difficult due to the growth failure of early loss and usually macerated abortions. We present a molecular study of an abortion in which the father carries a balanced reciprocal translocation t(2;17)(q32.1;q24.3) using QF-PCR and CGH techniques. DNA analysis showed the presence of a trisomy 2 due to a 3:1 interchange segregation. Recombinant events could also be investigated by comparing DNA samples from the family. We propose QF-PCR in addition to CGH as an efficient diagnostic method to improve our knowledge of unbalanced offspring in balanced translocation carriers. Copyright © 2005 John Wiley & Sons, Ltd.     

Organochlorine contaminants in hair of adolescents from Iassy, Romania

Human hair samples (n=42) from Iassy county (Eastern Romania) collected in 2002-2003 from adolescents were analyzed for hexachlorocyclohexane (HCH) isomers, p,p'-DDT and its metabolites, hexachlorobenzene (HCB), chlordane and metabolites and 5 polychlorinated biphenyl (PCB) congeners. Very low levels were found for HCB and oxychlordane (0.8 and 2.5 ng g(-1)) indicating a low usage of these pesticide formulations in the studied area. In case of HCHs, gamma-HCH isomer was measured at higher median concentrations (79 ng g(-1) hair) compared to the beta-HCH isomer (55 ng g(-1)), which generally is the most prevalent from HCHs. The DDTs profile consisted in p,p'-DDE and p,p'-DDT which levels correspond to 81% of sum DDTs. Very high median concentrations measured for p,p'-DDT (192 ng g(-1)) combined with lower values for p,p'-DDE/p,p'-DDT of 0.4 (from 0.20 to 2.0) in all hair samples suggest recent exposure to "fresh" DDT. When gender was considered, significantly higher concentrations for most of the investigated contaminants were found in girls hair compared to boys. Very high levels were found in the present study for HCHs and DDTs compared to samples from Greece, Western Europe and China. In case of PCBs, the levels found in Romanian samples were found to be in the same range compared to other previously published data.     

Ecological restoration as a strategy for mitigating and adapting to climate change: lessons and challenges from Brazil

Climate change is a global phenomenon that affects biophysical systems and human well-being. The Paris Agreement of the United Nations Framework Convention on Climate Change entered into force in 2016 with the objective of strengthening the global response to climate change by keeping global temperature rise this century well below 2 °C above pre-industrial levels and to pursue efforts to limit the temperature increase even further to 1.5 °C. The agreement requires all Parties to submit their “nationally determined contributions” (NDCs) and to strengthen these efforts in the years ahead. Reducing carbon emissions from deforestation and forest degradation is an important strategy for mitigating climate change, particularly in developing countries with large forests. Extensive tropical forest loss and degradation have increased awareness at the international level of the need to undertake large-scale ecological restoration, highlighting the need to identify cases in which restoration strategies can contribute to mitigation and adaptation. Here we consider Brazil as a case study to evaluate the benefits and challenges of implementing large-scale restoration programs in developing countries. The Brazilian NDC included the target of restoring and reforesting 12 million hectares of forests for multiple uses by 2030. Restoration of native vegetation is one of the foundations of sustainable rural development in Brazil and should consider multiple purposes, from biodiversity and ecosystem services conservation to social and economic development. However, ecological restoration still presents substantial challenges for tropical and mega-diverse countries, including the need to develop plans that are technically and financially feasible, as well as public policies and monitoring instruments that can assess effectiveness. The planning, execution, and monitoring of restoration efforts strongly depend on the context and the diagnosis of the area with respect to reference ecosystems (e.g., forests, savannas, grasslands, wetlands). In addition, poor integration of climate change policies at the national and subnational levels and with other sectorial policies constrains the large-scale implementation of restoration programs. The case of Brazil shows that slowing deforestation is possible; however, this analysis highlights the need for increased national commitment and international support for actions that require large-scale transformations of the forest sector regarding ecosystem restoration efforts. Scaling up the ambitions and actions of the Paris Agreement implies the need for a global framework that recognizes landscape restoration as a cost-effective nature-based solution and that supports countries in addressing their remaining needs, challenges, and barriers.

     

Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.