Combined effect of diuron and simazine on photosystem II photochemistry in a sandy soil and soil amended with solid olive-mill waste

Diuron (3-(3,4-dichlorophenyl)- = 1,1-dimethylurea) and simazine (6-chloro-N(2), N(4)-diethyl-1,3,5-triazine-2,4-diamine) are soil-applied herbicides used in olive crops. The objective of this study is to investigate the effect of these herbicides on Photosystem II photochemistry of Olea europaea L., and whether the amendment of soil with an organic waste (OW) from olive oil production industry modifies this effect. For this purpose, herbicide soil adsorption studies, with unamended and OW-amended soil, and chlorophyll fluorescence measurements in adult olive leaves, after one, two and three weeks of soil herbicide treatment and/or OW amendment, were performed. Soil application of these herbicides reduced the efficiency of Photosystem II photochemistry of olive trees due to chronic photoinhibition, and this effect is counterbalanced by the addition of OW to the soil. OW reduces herbicide uptake by the plant due to an increase in herbicide adsorption.     

Influence of gas flow-induced shear stress on the operation of the Anammox process in a SBR

The start up and performance of the Anammox process were tested in sequencing batch reactors with two different configurations: a bubble column (SBR-B) and a gas-lift reactor (SBR-G). Different off-gas upflow velocities were tested (3.53-12.3 cm min(-1)) in order to expose the biomass to different shear conditions and to study their effects on both efficiency and physical properties of the Anammox granular biomass. For the SBR-B the minimum gas upflow velocity needed to achieve biomass suspension inside the reactor was 12.3 cm min(-1). Such velocity made impossible the stable operation of the process. The fluidization of biomass for the SBR-G was reached at a gas upflow velocity of 3.52 cm min(-1). This system maintained an efficiency of nitrite removal around 98% at values up to 5.29 cm min(-1) but when the gas upflow velocity was increased from 5.29 to 9.70 cm min(-1) a significant decrease of the specific Anammox activity of the biomass from 0.35 to 0.05 g Ng(-1) VSS d(-1) was measured. The system lost 85% of its nitrogen removal efficiency which was not restored in spite of returning the gas upflow velocity to its initial value.     

Baseline element composition of foliose and fruticose lichens along the steep climatic gradient of SW Patagonia (Aisén Region, Chile)

Samples of foliose (Nephroma antarcticum) and fruticose (Usnea sp.) lichens were collected across a steep climatic and vegetation gradient in a remote, almost pristine region of SW Chilean Patagonia. Concentrations of major and trace elements in lichens from the rainforest were among the lowest ever reported worldwide for foliose and fruticose lichens and can be considered background levels for the region. The two lichen growth forms showed different elemental compositions mainly due to the greater capacity of foliose thalli to intercept elements from windborne and canopy-leached particles. The patterns of spatial variation in the chemical composition of lichens were effectively explained by statistical methods and reflected the different availability of wet and dry deposition along the steep climatic gradient. Baseline values established for N. antarcticum samples growing in temperate Nothofagus forests were therefore distinct from those of samples growing in more open, drier habitats. The fruticose Usnea sp. showed a higher affinity for atmophile Hg, low concentrations of lithophilic elements, and the same baseline composition whether from temperate forests or from dry, barren environments. The provided background and baseline values against which variations can be measured will be useful in the early detection of local or regional climatic and environmental change, especially in view of the planned construction of hydropower dams under the recently approved HidroAysén Project.     

Evaluation of concentration efficiency of the Pseudomonas aeruginosa phage PP7 in various water matrixes by different methods

Enteric viruses monitoring in surface waters requires the concentration of viruses before detection assays. The aim of this study was to evaluate different methods in terms of recovery efficiencies of bacteriophage PP7 of Pseudomonas aeruginosa, measured by real-time PCR, using it as a viral control process in water analysis. Different nucleic acid extraction methods (silica–guanidinium thiocyanate, a commercial kit (Qiagen Viral RNA Kit) and phenol–chloroform with alcohol precipitation) exhibited very low recovery efficiencies (0.08–4.18 %), being the most efficient the commercial kit used for subsequent experiments. To evaluate the efficiency of three concentration methods, PBS (as model for clean water) and water samples from rivers were seeded to reach high (HC, 10⁶ pfu ml^?1) and low concentrations (LC, 10⁴ pfu ml^?1) of PP7. Tangential ultrafiltration proved to be more efficient (50.36?±?12.91, 17.21?±?9.22 and 12.58?±?2.35 % for HC in PBS and two river samples, respectively) than adsorption–elution with negatively charged membranes (1.00?±?1.34, 2.79?±?2.62 and 0.05?±?0.08 % for HC in PBS and two river samples, respectively) and polyethylene glycol precipitation (15.95?±?7.43, 4.01?±?1.12 and 3.91?±?0.54 %, for HC in PBS and two river samples, respectively), being 3.2–50.4 times more efficient than the others for PBS and 2.7–252 times for river samples. Efficiencies also depended on the initial virus concentration and aqueous matrixes composition. In consequence, the incorporation of an internal standard like PP7 along the process is useful as a control of the water concentration procedure, the nucleic acid extraction, the presence of inhibitors and the variability of the recovery among replicas, and for the calculation of the sample limit of detection. Thus, the use of a process control, as presented here, is crucial for the accurate quantification of viral contamination.     

Effect of some heavy metals and soil humic substances on the phytochelatin production in wild plants from silver mine areas of Guanajuato, Mexico

Phytochelatins (PCs) were determined in the wild plants, focusing on their relationship with the levels of heavy metals and humic substances (HS) in soil. Ricinus communis and Tithonia diversifolia were collected from several sites in Guanajuato city (Mexico), which had long been the silver and gold mining center. The analysis of PCs in root extracts was carried out by liquid chromatography (derivatization with monobromobimane). Total Ag, Cd, Cu and Pb in plant roots and in soil samples, as well as soil HS were determined. The association of metals with HS in soils was evaluated by size exclusion chromatography (SEC) with UV and ICP-MS detection. The results obtained revealed the induction of PCs in R. communis but not in T. diversifolia. The levels of Cd and Pb in plant roots presented strong positive correlation with PC-2 (r = 0.9395, p = 0.005; r = 0.9573, p = 0.003, respectively), indicating that these two metals promote PCs induction in R. communis. On the other hand, the inverse correlation was found between soil HS and metal levels in roots of R. communis (Cu > Pb > Cd > Ag), in agreement with the decreasing affinity of these metals to HS. Importantly, the inverse correlation between soil HS and plant PC-2 was observed (r = −0.7825, p = 0.066). These results suggest that metals strongly bound to HS could be less bioavailable to plants, which in turn would limit their role in the induction of PCs. Indeed, the SEC elution profiles showed Pb but not Cd association with HS and the correlation between metal in soil and PC-2 in plant was statistically significant only for Cd (r = 0.7857, p = 0.064). Based on these results it is proposed that the role of heavy metals in PCs induction would depend on their uptake by R. communis, which apparently is controlled by the association of metals with soil HS. This work provides further evidence on the role of environmental conditions in the accumulation of heavy metals and phytochelatin production in plants.     

Nitrogen removal efficiencies and microbial communities in full-scale IFAS and MBBR municipal wastewater treatment plants at high COD:N ratio

• Two IFAS and two MBBR full-scale systems (high COD:N ratio 8:1) were characterized. • High specific surface area carriers grew and retained slow-growing nitrifiers. • High TN removal is related to high SRT and low DO concentration in anoxic tanks. The relative locations of AOB, NOB, and DNB were examined for three different kinds of carriers in two types of hybrid biofilm process configurations: integrated fixed-film activated sludge (IFAS) and moving bed biofilm reactor (MBBR) processes. IFAS water resource recovery facilities (WRRFs) used Anodkalness^TM K1 carriers (KC) at Broomfield, Colorado, USA and polypropylene resin carriers (RC) at Fukuoka, Japan, while MBBR WRRFs used KC carriers at South Adams County, Colorado, USA and sponge carriers (SC) at Saga, Japan. Influent COD to N ratios ranged from 8:1 to 15:1. The COD and BOD removal efficiencies were high (96%–98%); NH₄⁺-N and TN removal efficiencies were more varied at 72%–98% and 64%–77%, respectively. The extent of TN removal was higher at high SRT, high COD:N ratio and low DO concentration in the anoxic tank. In IFAS, RC with high specific surface area (SSA) maintained higher AOB population than KC. Sponge carriers with high SSA maintained higher overall bacteria population than KC in MBBR systems. However, the DNB were not more abundant in high SSA carriers. The diversity of AOB, NOB, and DNB was fairly similar in different carriers. Nitrosomonas sp. dominated over Nitrosospira sp. while denitrifying bacteria included Rhodobacter sp., Sulfuritalea sp., Rubrivivax sp., Paracoccus sp., and Pseudomonas sp. The results from this work suggest that high SRT, high COD:N ratio, low DO concentration in anoxic tanks, and carriers with greater surface area may be recommended for high COD, BOD and TN removal in WRRFs with IFAS and MBBR systems.     

Perspectives of farmers and tourists on agricultural abandonment in east Lesvos,Greece

Regional Environmental Change - Multi-stakeholder perceptions of landscape changes are increasingly recognized as essential inputs to discussions on future landscape developments, particularly when...     

Escape take-off strategies in birds: the significance of protective cover

Avian escape strategy is highly dependent on the ability to fly, and the success rate of raptor attacks is reduced if the prey gets fully airborne. Therefore, when escaping from predator attacks, the initial take-off is crucial and a rapid take-off, high velocity, and high angle of ascent maximize the chance of survival. However, due to the laws of gravity, birds face a trade-off between maximizing its linear acceleration and maximizing its rate of climb when taking off. The optimal policy between velocity and angle of ascent when a bird escapes from an attacking predator might depend on the detailed nature of the predator’s attack, the proximity to cover, and the presence of conspecifics. Many small birds rely on a quick dash to protective cover. In this study, we examine how the availability of protective cover affects take-off strategy in birds. Male great tits (Parus major) were subjected to a surprise attack by a model predator either in the presence or absence of protective cover. When attacked by the predator, great tits took off and perched in the cover when it was available. Birds subjected to the predator attack in the absence of cover took off in 10° higher angle of ascent and flew faster in the start of the take-off, compared to birds that took off in the presence of cover. Thus, this study for the first time shows that a bird do trade off speed with angle of ascent in an adaptive way, depending on the presence of protective cover.     

Measuring sustainable development knowledge,attitudes, and behaviors: evidence from university students in Mexico

Environment, Development and Sustainability - Current trends such as imminent overpopulation and the take-make-waste economic model are largely responsible for the planet’s dire situation....     

Occupational exposure

Concentrations of polychlorinated biphenyls (PCB), polychlorinated naphthalenes (PCN), polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), hexachlorobenzene and methylsulphonyl metabolites of PCB were determined in blood plasma from potentially exposed workers and controls. Three of the potentially exposed subjects had worked with cable incineration and two were electricians. Extraction of the organochlorine compounds and lipids were performed using the lipophilic gel Lipidex. Different adsorbents and gel permeation chromatography were applied for further purification of the samples and separation of analytes. Determinations of the chlorinated compounds were made by using gas chromatography with electron-capture detection and gas chromatography-mass spectrometry. Only small differences in the concentrations of organochlorine compounds were found in the plasma from the three subject groups. Thus, specific exposure of the workers could not be confirmed.