A new growth model for fishes and the estimation of optimum age of fish populations

Evidence is presented that a simple power equation of the formX _t –X _m =±b(|tࢤt _m|)^B can describe growth in length and weight of fishes, whereX _t denotes fish length or weight at aget, X _m is length or weight (L _m orW _m ) at a reference aget _m , andb andB are parameters to be estimated by the least squares. The optimum age of fish populations (t _y ) may be estimated by the equationMW _m /b=±y ^B (B/y-M) whereM denotes natural mortality and wherey=t _y -t _m .     

Selenium removal and mass balance in a constructed flow-through wetland system

A field study on the removal of Se from agricultural subsurface drainage was conducted from May 1997 to February 2001 in the Tulare Lake Drainage District (TLDD) of San Joaquin Valley, California. A flow-through wetland system was constructed consisting of ten 15- x 76-m unlined cells that were continuously flooded and planted with either a monotype or combination of plants, including sturdy bulrush [Schoenoplectus robustus (Pursh) M.T. Strong], baltic rush (Juncus balticus Willd.), smooth cordgrass (Spartina alterniflora Loisel.), rabbitsfoot grass [Polypogon monspeliensis (L.) Desf.], salt-grass lDistichlis spicata (L.) Greene], cattail (Typha latifolia L.), tule [Schoenoplectus acutus (Muhl. ex Bigelow) A. L?ve & D. L?ve], and widgeon grass (Ruppia maritima L.). One cell had no vegetation planted. The objectives of this research were to evaluate Se removal efficiency of each wetland cell and to carry out a mass balance on Se. The inflow drainage water to the cells had average annual Se concentrations of 19 to 22 microg L(-1) dominated by selenate [Se(VI), 95%]. Average weekly water residence time varied from about 3 to 15 d for Cells 1 through 7 (target 7 d), 19 to 33 d for Cells 8 and 9 (target 21 d), and 13 to 18 d for Cell 10 (target 14 d). Average weekly Se concentration ratios of outflow to inflow ranged from 0.45 to 0.79 and mass ratio (concentration x water volume) from 0.24 to 0.52 for year 2000, that is, 21 to 55% reduction in Se concentration and 48 to 76% Se removal in mass by the wetland, respectively. The nonvegetated cell showed the least Se removal both in concentration and in mass. The global mass balance showed that on the average about 59% of the total inflow Se was retained within the cells and Se outputs were outflow (35%), seepage (4%), and volatilization (2%). Independent measurements of the Se retained in the cells totaled 53% of the total Se inflow: 33% in the surface (0-20 cm) sediment, 18% in the organic detrital layer above the sediment, 2% in the fallen litter, < 1% in the standing plants, and < 1% in the surface water. Thus, about 6% of the total Se inflow was unaccounted for in the internal compartments.     

Efficacy of alum and coal combustion by-products in stabilizing manure phosphorus

Animal manures contain large amounts of soluble phosphorus (P), which is prone to runoff losses when manure is surface-applied. Here we report the efficacy of alum and three coal combustion by-products in reducing P solubility when added to dairy, swine, or broiler litter manures in a laboratory incubation study. Compared with unamended controls, alum effectively reduced readily soluble P, determined in water extracts of moist manure samples with 1 h of shaking, for all three manures. The reduction ranged from 80 to 99% at treatment rates of 100 to 250 g alum kg(-1) manure dry matter. The fluidized bed combustion fly ash (FBC) reduced readily soluble P by 50 to 60% at a rate of 400 g kg(-1) for all three manures. Flue gas desulfurization by-product (FGD) reduced readily soluble P by nearly 80% when added to swine manure and broiler litter at 150 and 250 g kg(-1). Another by-product, anthracite refuse fly ash (ANT), was ineffective for all three manures. In all cases, reduction in readily soluble P is primarily associated with inorganic phosphorus (P(i)) with little change in organic phosphorus (P(o)). Sequential extraction results indicate that the by-product treatments shifted manure P from H2O-P into a less vulnerable fraction, NaHCO3 - P, while the alum treatment shifted the P into even more stable forms, mostly NaOH-P. Such shifts in P fractions would have little influence on P availability for crops over the long-term but would retard and reduce potential losses of P following manure applications.     

The potential of rhizosphere microbes isolated from a constructed wetland to biomethylate selenium

The potential of rhizosphere microbes isolated from common reed [Phragmites australis (Cav.) Trin. ex Steud] plants grown in a subsurface-flow constructed wetland to biomethylate selenate or selenite was studied in liquid cultures under controlled conditions. Total mean percentages of volatilized Se from half-strength Hoagland culture solutions (low C content) supplemented with selenate or selenite and inoculated with cultured rhizosphere microbes after 15 d of incubation were 7.9 and 49.1%, respectively. There was a relative best fit (r = 0.87) between total number of rhizosphere and cultured microbes and the percentage of volatilized Se in Hoagland solution after 15 d of incubation. However, when the same microbes were cultured in tryptic soybean broth (TSB) medium (high C content), the percentages of volatilized Se from selenate and selenite were 1.3 and 1.9%, respectively. The volatilization percentages of Se from selenate or selenite in culture solutions inoculated with rhizosphere suspension instead of cultured rhizosphere microbes were very low (1.2-3.0%) in both cultivation media. In all experiments, selenite was volatilized significantly (p < 0.05) in higher amounts by cultured rhizosphere microbes after 15 d of incubation compared with selenate. Dissolved biomethylated dimethylselenide (DMSe) in water samples taken from the subsurface-flow bed was determined by purging with helium. The DMSe in water samples was indirectly detected up to 2.4 microg Se L(-1), which indicates that part of the produced DMSe was dissolved in the matrix before being released into the atmosphere. Our results show that rhizosphere microbes isolated from common reed plants have a high potential of Se biomethylation and volatilization from selenate and selenite.     

Eu3+ uptake by calcite: preliminary results from coprecipitation experiments and observations with surface-sensitive techniques

A lack of information in databases for contamination risk assessment about the transport behaviour of the trivalent f-orbital elements in groundwater systems where calcite is at equilibrium motivated this study of Eu(3+) uptake. The free drift technique was used to examine the effects of Eu(3+) concentration, presence of Na(+) or K(+) and temperature, as well as calcite nucleation and precipitation kinetics, on the partitioning of calcite. Changes in surface composition and morphology resulting from exposure of single crystals of Iceland spar to Eu(3+)-bearing solutions were observed with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). First results confirm that calcite has high affinity for Eu(3+). Rates of nucleation and precipitation strongly affect the extent of uptake but the presence of Na(+) and K(+) has no effect, suggesting formation of solid solution as CaCO(3)-EuOHCO(3). Surface-sensitive techniques prove that Eu(3+) is adsorbed to calcite even when the surface is dissolving and adsorption is not accompanied by precipitation of a separate Eu(3+)-solid phase. Adsorbed Eu modifies calcite's dissolution behaviour, roughening terraces and rounding step edges, and producing surface morphology where some surface sites appear blocked. Results imply that Eu(3+) concentrations in natural calcites are limited by Eu(3+) availability rather than by a lack of ability to fit into calcite's atomic structure. This behaviour can probably be expected for other trivalent rare Earth elements (REE), actinides and fission products whose behaviour is similar to that of Eu(3+). These elements are likely to be incorporated within the calcite bulk in systems where it is precipitating and the demonstrated strong partitioning ensures some uptake even where calcite is at or under saturation.     

Assessing vulnerability to invasion by nonnative plant species at multiple spatial scales

Basic information on where nonnative plant species have successfully invaded is lacking. We assessed the vulnerability of 22 vegetation types (25 sets of four plots in nine study areas) to nonnative plant invasions in the north–central United States. In general, habitats with high native species richness were more heavily invaded than species-poor habitats, low-elevation areas were more invaded than high-elevation areas, and riparian zones were more invaded than nearby upland sites. For the 100 1000-m² plots (across all vegetation types), 50% of the variation in nonnative species richness was explained by longitude, latitude, native plant species richness, soil total percentage nitrogen, and mean maximum July temperature (n = 100 plots; P < 0.001). At the vegetation-type scale (n = 25 sets of four 1000-m² plots/type), 64% of the variation in nonnative species richness was explained by native plant species richness, elevation, and October to June precipitation (P < 0.001). The foliar cover of nonnative species (log) was strongly positively correlated with the nonnative species richness at the plot scale (r = 0.77, P < 0.001) and vegetation-type scale (r = 0.83, P < 0.001). We concluded that, at the vegetation-type and regional scales in the north–central United States, (1) vegetation types rich in native species are often highly vulnerable to invasion by nonnative plant species; (2) where several nonnative species become established, nonnative species cover can substantially increase; (3) the attributes that maintain high native plant species richness (high light, water, nitrogen, and temperatures) also help maintain nonnative plant species richness; and (4) more care must be taken to preserve native species diversity in highly vulnerable habitats.     

SEPTAGE QUALITY AND ITS EFFECT ON FIELD LIFE FOR LAND APPLICATIONS1

ABSTRACT: Maintenance of the more than 24 million septic tanks in the U.S. requires removal and disposal of septage. Disposal options include application to agricultural lands where the nutrients and organic matter can provide soil benefits. However, pathogens and contaminants are also contained in septage. An extensive search turned up very few data on septage quality, and those reveal high variability. The data used by the U.S. Environmental Protection Agency (EPA) in developing regulations had the lowest metal concentrations among the nine data sets that could be compared. Based on these data, EPA assumed that septage could be applied to agricultural land for more than 100 applications before reaching unacceptable cumulative loading of metals. They thus did not establish federal standards for metals in septage, and no monitoring is required under federal rules governing septage disposal. Analysis of the nine data sets we found showed that field site life would be reached in less than 100 applications for most septage and cumulative loading limits established by EPA for sewage sludges will be exceeded in 16 applications for some septage as opposed to the 100 application estimate used by EPA. Determination of acceptable cumulative loading depends on numerous technical and policy considerations. All septage sources reached the more restrictive loading limits such as those established by the New York State Department of Environmental Conservation (NYSDEC) and the recommendations in Cornell publications in less than 100 applications. In one case the cumulative limit for copper was exceeded in a single application. These findings suggest additional data are needed on septage quality and that the federal and state agencies responsible for regulating application of septage to agricultural land should reassess their standards.     

安全系统可靠性分析方法

讨论了安全系统可靠性分析的最新趋势,即:由对系统的定性分析转向定量分析.给出了可靠性分析的一些方法,包括定性和定量方法.重点研究了马尔可夫故障模型法.针对马尔可夫故障模型法计算量大的缺点,提出了相应的改进方法微马尔可夫故障模型法,分析了此法在可靠性分析中的应用.     

Biodegradation Behavior of Some Vegetable Oil-Based Polymers

The potential biodegradability of several vegetable oil-based polymers was assessed by respirometry in soil for 60–100 days at temperatures of 30–58°C. Films of soybean oil and linseed oil which were oxidatively polymerized (Co catalyst) on a kraft paper support were 90%–100% mineralized to CO₂ after 70 days at 30°C. Mineralization of polymerized tung oil to CO₂ was much slower than soy or linseed oils. Mineralization of epoxy resins made from epoxidized soybean oil (ESO) and aliphatic dicarboxylic acids was rapid while mineralization of similar resins made with a triacid (citric) was slower. There was no significant degradation of polyamine/ESO resins after 100 days at 58°C. Mineralization of the available carbon in vegetable oil polyurethanes and cationically polymerized ESO was less than 7.5% after 70 days at 30°C and 25 days at 55°C compared to 100% for soybean oil. From these results, it appears that triglycerides highly cross-linked with non-degradable linkages are not biodegradable to a significant extent while triglycerides cross-linked with hydrolysable bonds such as esters remain biodegradable.     

WETLAND BOUNDARIES IN THE NEW JERSEY PINELANDS: ECOLOGICAL RELATIONSHIPS AND DELINEATION1

Wetland protection regulations and guidelines often require the delineation of precise wetland boundaries on a case-by-case basis. In this study, conducted in the New Jersey Pinelands, an ecological characterization of vegetation composition, soil and hydrologic relationships along upland to wetland Pinus rigida - dominated transittions provided the basis for a multiparameter approach to wetland boundary delineation. The transitional data set was analyzed by direct gradient analysis, cluster analysis and ordination. It is concluded that vegetation composition can be a principal factor in delineating wetland boundaries along natural upland to wetland transitions. However, where distinct vegetation changes are not observed, a feature of our study sites, a multiparameter approach should be used.