Annual and weekly patterns of ozone and particulate matter in Jeddah,Saudi Arabia

Air pollution has been an increasing concern within the Kingdom of Saudi Arabia and other Middle Eastern countries. In this work the authors present an analysis of daily ozone (O₃), nitrogen oxide (NO_x), and particulate matter (<10 μm aerodynamic diameter; PM₁₀) concentrations for two years (2010 and 2011) at sites in and around the coastal city of Jeddah, as well as a remote background site for comparison. Monthly and weekly variations, along with their implications and consequences, were also examined. O₃ within Jeddah was remarkably low, and exhibited the so-called weekend effect—elevated O₃ levels on the weekends, despite reduced emissions of O₃ precursors on those days. Weekend O₃ increases averaged between 12% and 14% in the city, suggesting that NO_x/volatile organic compound (VOC) ratios within cities such as Jeddah may be exceptionally high. Sites upwind or far removed from Jeddah did not display this weekend effect. Based on these results, emission control strategies in and around Jeddah must carefully address NO_x/VOC ratios so as to reduce O₃ at downwind locations without increasing it within urban locations themselves. PM₁₀ concentrations within Jeddah were elevated compared with North American cites of similar climatology, though comparable to other large cities within the Middle East.

Implications:Daily concentrations of O₃, PM₁₀, and NO_x in and around the city of Jeddah, Saudi Arabia, are analyzed and compared with those of other reference cities. Extremely low O₃ levels, along with a significant urban weekend effect (higher weekend O₃, despite reduced NO_x concentrations), is apparent, along with high levels of PM₁₀ within the city. Urban O₃ in Jeddah was found to be lower than that of other comparable cities, but the strong weekend effect suggests that care must be taken to reduce downwind O₃ levels without increasing them within the city itself. Further research into the emissions and chemistry contributing to the reduced O₃ levels within the city is warranted.     

Water quality characteristics of discharge from reforested loose-dumped mine spoil in eastern Kentucky

Surface mining is a common method for extracting coal in the coal fields of eastern Kentucky. Using the Forestry Reclamation Approach (FRA), which emphasizes the use of minimally compacted or loose-dumped spoil as a growth medium for trees, reclamation practitioners are successfully reestablishing forests. Yet, questions remain regarding the effects FRA has on the quality of waters discharged to receiving streams. To examine the effect of FRA on water quality, this study compared waters that were discharged from three types of spoils: predominantly brown, weathered sandstone (BROWN); predominantly gray, unweathered sandstone (GRAY); and an equal mixture of both aforementioned sandstones and shale (MIXED). The water quality parameters pH, EC, Ca, K, Mg, Na, NO-N, NH-N, SO, Cl, TC, suspended sediment concentration (SSC), settleable solids (SS), and turbidity were monitored over a 2-yr period on six 0.4-ha plots (two replications per spoil type). Generally, levels of Cl, SO, Ca, NO-N, NH-N, SS, SSC, and turbidity decreased over time. The pH for all spoils increased from about 7.5 to 8.5. The EC remained relatively level in the BROWN spoil, whereas the GRAY and MIXED spoils had downward trajectories that were approaching 500 μS cm. The value of 500 μS cm has been reported as the apparent threshold at which certain taxa such as Ephemeroptera (e.g., Mayfly) recolonize disturbed headwater streams of eastern Kentucky and adjacent coal-producing Appalachian states.     

Coastal spreading of olivine to control atmospheric CO2 concentrations: A critical analysis of viability

Qualitative proposals to control atmospheric CO₂ concentrations by spreading crushed olivine rock along the Earth's coastlines, thereby accelerating weathering reactions, are presently attracting considerable attention. This paper provides a critical evaluation of the concept, demonstrating quantitatively whether or not it can contribute significantly to CO₂ sequestration. The feasibility of the concept depends on the rate of olivine dissolution, the sequestration capacity of the dominant reaction, and its CO₂ footprint. Kinetics calculations show that offsetting 30% of worldwide 1990 CO₂ emissions by beach weathering means distributing of 5.0 Gt of olivine per year. For mean seawater temperatures of 15–25 °C, olivine sand (300 μm grain size) takes 700–2100 years to reach the necessary steady state sequestration rate and is therefore of little practical value. To obtain useful, steady state CO₂ uptake rates within 15–20 years requires grain sizes <10 μm. However, the preparation and movement of the required material poses major economic, infrastructural and public health questions. We conclude that coastal spreading of olivine is not a viable method of CO₂ sequestration on the scale needed. The method certainly cannot replace CCS technologies as a means of controlling atmospheric CO₂ concentrations.     

Payments for Environmental Services in Latin America as a Tool for Restoration and Rural Development

Payments for Environmental Services (PES) can encourage projects that enhance restoration, production, and rural development. When projects promote differentiated systems by paying farmers for the provision of services, the application of PES requires evaluation of the environmental services provided by each system. We present evaluations of carbon stocks and biodiversity in pure and mixed native tree plantations in Costa Rica. To illustrate how monetary values can be assigned, we discuss a project that awarded PES to silvopastoral systems in Costa Rica, Nicaragua, and Colombia based on carbon stocks and biodiversity. PES can promote positive environmental attitudes in farmers. Currently this project is being scaled up in Colombia based on their positive experiences with PES as a tool to promote adoption. Compared to PES systems that include only one environmental service, systems that incorporate bundling or layering of multiple services can make sustainable land uses more attractive to farmers and reduce perverse incentives.     

Environmental contaminants in freshwater fish and their risk to piscivorous wildlife based on a national monitoring program

Organochlorine chemical residues and elemental concentrations were measured in piscivorous and benthivorous fish at 111 sites from large U.S. river basins. Potential contaminant sources such as urban and agricultural runoff, industrial discharges, mine drainage, and irrigation varied among the sampling sites. Our objectives were to provide summary statistics for chemical contaminants and to determine if contaminant concentrations in the fish were a risk to wildlife that forage at these sites. Concentrations of dieldrin, total DDT, total PCBs, toxaphene, TCDD-EQ, cadmium, chromium, mercury, lead, selenium, and zinc exceeded toxicity thresholds to protect fish and piscivorous wildlife in samples from at least one site; most exceedences were for total PCBs, mercury, and zinc. Chemical concentrations in fish from the Mississippi River Basin exceeded the greatest number of toxicity thresholds. Screening level wildlife risk analysis models were developed for bald eagle and mink using no adverse effect levels (NOAELs), which were derived from adult dietary exposure or tissue concentration studies and based primarily on reproductive endpoints. No effect hazard concentrations (NEHC) were calculated by comparing the NOAEL to the food ingestion rate (dietary-based NOAEL) or biomagnification factor (tissue-based NOAEL) of each receptor. Piscivorous wildlife may be at risk from a contaminant if the measured concentration in fish exceeds the NEHC. Concentrations of most organochlorine residues and elemental contaminants represented no to low risk to bald eagle and mink at most sites. The risk associated with pentachloroanisole, aldrin, Dacthal, methoxychlor, mirex, and toxaphene was unknown because NOAELs for these contaminants were not available for bald eagle or mink. Risk differed among modeled species and sites. Our screening level analysis indicates that the greatest risk to piscivorous wildlife was from total DDT, total PCBs, TCDD-EQ, mercury, and selenium. Bald eagles were at greater risk to total DDT and total PCBs than mink, whereas risks of TCDD-EQ, mercury, and selenium were greater to mink than bald eagle.     

A comparison of mesh-adaptive LES with wind tunnel data for flow past buildings: Mean flows and velocity fluctuations

In this paper we address two important aspects of micro-scale urban airflow model evaluation: (a) the identification of key flow features as dictated by the physics of the problem and as captured by the simulations, and (b) the comparison of important model output parameters (mean flows and fluctuations) with experimental data. A series of mesh-adaptive large eddy simulations (LES) was carried out for the study of air flows within two intersecting street canyons with varying building configurations. The novelty of the approach lies in the combination of LES with mesh adaptivity, which allows a variable-filter length and the implementation of an anisotropic eddy-viscosity model. Both coarse and fine-mesh simulations were carried out, using single and parallel-processor systems respectively. The simulations showed clearly that the expected flow patterns such as the street canyon recirculation and the street-mouth vortices, as well as the exchange of air flow at the street intersections, can readily be captured by the mesh-adaptive LES.In addition, the detailed comparisons of mean flows and fluctuations of the resolved velocity field with the measured data showed that the simulation results agreed well with the patterns and trends of the wind tunnel measurements. In most cases the finer-mesh simulations improved considerably the accuracy of the mean flows, especially for the symmetrical configuration. The improvement in the predicted fluctuations was less obvious, with several detector locations underpredicting the measured values, although the overall comparison was also satisfactory. The typical errors for the mean flows for all three building configurations were less than 30%, whilst for the velocity fluctuations less that 40%. Both the simulated means flows and turbulence levels were generally more accurate in the streets parallel to the wind (streamwise direction) than in the streets normal to the wind.     

Application of a combined measurement and modeling method to quantify windblown dust emissions from the exposed playa at Mono Lake, California

Particulate matter < or =10 microm (PM10) emissions due to wind erosion can vary dramatically with changing surface conditions. Crust formation, mechanical disturbance, soil texture, moisture, and chemical content of the soil can affect the amount of dust emitted during a wind event. A refined method of quantifying windblown dust emissions was applied at Mono Lake, CA, to account for changing surface conditions. This method used a combination of real-time sand flux monitoring, ambient PM10 monitoring, and dispersion modeling to estimate dust emissions and their downwind impact. The method identified periods with high emissions and periods when the surface was stable (no sand flux), even though winds may have been high. A network of 25 Cox sand catchers (CSCs) was used to measure the mass of saltating particles to estimate sand flux rates across a 2-km2 area. Two electronic sensors (Sensits) were used to time-resolve the CSC sand mass to estimate hourly sand flux rates, and a perimeter tapered element oscillating microbalance (TEOM) monitor measured hourly PM10 concentrations. Hourly sand flux rates were related by dispersion modeling to hourly PM10 concentrations to back-calculate the ratio of vertical PM10 flux to horizontal sand flux (K-factors). Geometric mean K-factor values (K(f)) were found to change seasonally, ranging from 1.3 x 10(-5) to 5.1 x 10(-5) for sand flux measured at 15 cm above the surface (q15). Hourly PM10 emissions, F, were calculated by applying seasonal K-factors to sand flux measurements (F = K(f) x q15). The maximum hourly PM10 emission rate from the study area was 76 g/m2 x hr (10-m wind speed = 23.5 m/sec). Maximum daily PM10 emissions were estimated at 450 g/m2 x day, and annual emissions at 1095 g/m2 x yr. Hourly PM10 emissions were used by the U.S. Environmental Protection Agency (EPA) guideline AERMOD dispersion model to estimate downwind ambient impacts. Model predictions compared well with monitor concentrations, with hourly PM10 ranging from 16 to over 60,000 microg/m3 (slope = 0.89, R2 = 0.77).     

Gene-TEQ--a standardized comparative assessment of effects in the comet assay using genotoxicity equivalents

Existing methods for the comparison of genotoxic effects in the comet assay bear considerable disadvantages such as the problem to link information about concentration dependence and severity of effects. Moreover, given the lack of standardized protocols and the use of various standards, it may be extremely difficult to compare different studies. In order to provide a method for standardized comparative assessment of genotoxic effects, the concept of genotoxicity equivalents (Gene-TEQ) was developed. As potential reference compounds for genotoxic effects, three directly acting (N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), methyl-methanesulfonate, and N-methyl-N-nitrosourea) and three indirectly acting (cyclophosphamide, dimethylnitrosamine, and 4-nitroquinoline-oxide) genotoxic substances were compared with respect to their cytotoxic (neutral red) and genotoxic (comet assay) concentration-response profiles in the permanent fish cell line RTL-W1. For further comparison, two sediment extracts from the upper Danube River were investigated as environmental samples. Based on the results of cytotoxicity and genotoxicity testing, MNNG was selected as the reference compound. At several exposure levels and durations, genotoxic effects of both the other pure substances and the environmental samples were calculated as percentages of the maximum MNNG effect and related to the absolute MNNG effect (EC values). Thus, genotoxicity equivalent factors (Gene-TEQs) relative to MNNG could be calculated. Gene-TEQs can easily be applied to pure substances, mixtures and field samples to provide information about their toxicity relative to the reference compound. Furthermore, the Gene-TEQ concept allows a direct comparison of environmental samples from different laboratories.     

Application of Rosgen’s BANCS Model for NE Kansas and the Development of Predictive Streambank Erosion Curves1

Sass, Christopher K. and Tim D. Keane, 2012. Application of Rosgen’s BANCS Model for NE Kansas and the Development of Predictive Streambank Erosion Curves. Journal of the American Water Resources Association (JAWRA) 48(4): 774‐787. DOI: 10.1111/j.1752‐1688.2012.00644.x Abstract: Sedimentation of waterways and reservoirs directly related to streambank erosion threatens freshwater supply. This study sought to provide a tool that accurately predicts annual streambank erosion rates in NE Kansas. Rosgen (2001, 2006) methods were employed and 18 study banks were measured and monitored from 2007 through 2010 (May‐June). Bank profiles were overlaid to calculate toe pin area change due to erosional processes. Streambanks experienced varied erosion rates from similar Bank Erosion Hazard Index (BEHI)‐Near Bank Stress (NBS) combinations producing R² values of 0.77 High‐Very High BEHI rating and 0.75 Moderate BEHI rating regarding predictive erosion curves for NE Kansas. Moderate ratings demonstrated higher erosion rates than High‐Very High ratings and BEHI trend lines intersected at lower NBS ratings, suggesting a discrepancy in the fit of the model to conditions in the NE Kansas region. BEHI model factors were evaluated and assessed for additional influences exerted in the region. Woody vegetation adjacent to the stream seemed to provide the most variation in erosion rates. This study’s findings allowed us to calibrate and modify the existing BEHI model according to woody vegetation occurrence levels along streambanks with high clay content. Modifications regarding vegetation occurrence of the BEHI model was completed and the results of these modifications generated new curves resulting in R² values of 0.84 High‐Very High BEHI and 0.88 Moderate BEHI ratings.