Metals emitted from heavy-duty diesel vehicles equipped with advanced PM and NOX emission controls

Emission factors for elemental metals were determined from several heavy-duty diesel vehicles (HDDV) of 1998–2007 vintage, operating with advanced PM and/or NO_X emissions control retrofits on a heavy-duty chassis dynamometer, under steady state cruise, transient, and idle conditions. The emission control retrofits included diesel particulate filters (DPF): catalyzed and uncatalyzed, passive and active prototype vanadium- or zeolite-based selective catalytic reduction (SCR) systems, and a catalyzed DPF fitted on a hybrid diesel electric drive vehicle. The prototype SCR systems in combination with DPF retrofits are of particular interest because they represent the expected emissions controls for compliance with PM and NO_X regulations in 2010. PM samples from a full-exhaust dilution tunnel were collected on bulk filters, and on a Personal Cascade Impactor Sampler (PCIS) for total and water-soluble elemental analysis. All the DPFs significantly reduced emissions of total trace elements (>85% and >95% for cruise and for the Urban Dynamometer Driving Schedule (UDDS), respectively). However, we observed differences in the post-retrofit metals emissions due to driving cycle effects (i.e., exhaust temperature) and type of retrofit. In general, the metals emissions over cruise conditions (which leads to higher exhaust temperatures) were substantially different from the emissions over a transient cycle or while idling. For instance, during cruise, we observed higher levels of platinum (1.1 ± 0.6–4.2 ± 3.6 ng km^?1) for most of the retrofit-equipped vehicle tests compared to the baseline configuration (0.3 ± 0.1 ng km^?1). The vanadium-based DPF + SCR vehicle during cruise operation exhibited emissions of vanadium (562 ± 265 ng km^?1) and titanium (5841 ± 3050 ng km^?1), suggesting the possible release of actual SCR wash-coat (V₂O₅/TiO₂) from the catalyst under the higher temperatures characteristic of cruise operation. The vanadium emissions exhibited a bi-modal mass size distribution, with modes at <0.25 μm and 1.0–2.5 μm size ranges for the vanadium-based SCR system. For the DPF + SCR systems, a greater fraction of the metal emissions from the zeolite-based system is water-soluble compared to emissions from the vanadium-based system.     

Relative proportions of polycyclic aromatic hydrocarbons differ between accumulation bioassays and chemical methods to predict bioavailability

Chemical methods to predict the bioavailable fraction of organic contaminants are usually validated in the literature by comparison with established bioassays. A soil spiked with polycyclic aromatic hydrocarbons (PAHs) was aged over six months and subjected to butanol, cyclodextrin and tenax extractions as well as an exhaustive extraction to determine total PAH concentrations at several time points. Earthworm (Eisenia fetida) and rye grass root (Lolium multiflorum) accumulation bioassays were conducted in parallel. Butanol extractions gave the best relationship with earthworm accumulation (r² ≤ 0.54, p ≤ 0.01); cyclodextrin, butanol and acetone-hexane extractions all gave good predictions of accumulation in rye grass roots (r² ≤ 0.86, p ≤ 0.01). However, the profile of the PAHs extracted by the different chemical methods was significantly different (p < 0.01) to that accumulated in the organisms. Biota accumulated a higher proportion of the heavier 4-ringed PAHs. It is concluded that bioaccumulation is a complex process that cannot be predicted by measuring the bioavailable fraction alone.     

Low-wind/high particulate matter episodes in the Calexico/Mexicali region

The U.S. Environmental Protection Agency (EPA) currently classifies Imperial County, CA, as a nonattainment area for PM10 (particulate matter [PM] < or = 10 microm in diameter), and this region suffers from high rates of chronic bronchitis and childhood asthma. Although high annual and daily average PM levels can have negative health and economic effects, recent studies have identified an association between adverse health effects and short-term PM spikes of tens of micrograms per cubic meter. This study identified PM episodes in Calexico/Mexicali that involve PM concentration spikes with concentrations up to 10 times greater than those reported to cause adverse health effects. These episodes appear to be relatively common during the winter months, are associated with wind speeds below 2 m/sec and stable boundary level heights below 500 m, and can comprise a large portion of the 24-hr PM levels. The organic composition of the PM10 samples collected during the low-wind/ high-PM episodes differed from that collected at other times. However, a preliminary source attribution identified only one significant difference between the source classes: agricultural burning accounted for 6.7% of organic-fraction PM10 for low-wind/high-PM episodes versus 0.25% at other times. This preliminary source attribution also revealed that motor vehicles were the most important relative contributor to organic PM10.     

Limitations of Long-Path Averaging Instruments

ABSTRACT

Long-path averaging instruments measure the average velocity or concentration of a substance or substances over an averaging path. These measurements are then often used for calculation of the average concentration and mass flow rate of the substance. The purpose of this paper is to describe some of the limitations of these instruments and to suggest ways in which these limitations can be minimized. Two limitations were examined: measuring concentration in a single dimension (e.g., ignoring the variation in concentration over the width of the sample plane), and deriving an average concentration without considering velocity effects. The resultant errors will be application-specific.

Estimates of the second source of error can be obtained from the covariance of concentration and velocity profiles over the path length. Unfortunately, suitable field data were not available, and to illustrate the method, estimates of the error were obtained for a range of possible concentration and velocity profiles. Errors of 50% or greater in the mass flow were incurred for the concentration and velocity profiles considered. This error was reduced to a negligible level by segmenting the averaging path length. It is recommended that velocity and concentration profiles be obtained for a broad range of applications to enable the importance of covariance errors to be better assessed.     

Global reforestation and biodiversity conservation

The loss of forest is a leading cause of species extinction, and reforestation is 1 of 2 established interventions for reversing this loss. However, the role of reforestation for biodiversity conservation remains debated, and lacking is an assessment of the potential contribution that reforestation could make to biodiversity conservation globally. We conducted a spatial analysis of overlap between 1,550 forest-obligate threatened species’ ranges and land that could be reforested after accounting for socioeconomic and ecological constraints. Reforestation on at least 43% (∼369 million ha) of reforestable area was predicted to potentially benefit threatened vertebrates. This is approximately 15% of the total area where threatened vertebrates occur. The greatest opportunities for conserving threatened vertebrate species are in the tropics, particularly Brazil and Indonesia. Although reforestation is not a substitute for forest conservation, and most of the area containing threatened vertebrates remains forested, our results highlight the need for global conservation strategies to recognize the potentially significant contribution that reforestation could make to biodiversity conservation. If implemented, reforestation of ∼369 million ha would also contribute substantially to climate-change mitigation, offering a way to achieve multiple sustainability commitments at once. Countries must now work to overcome key barriers (e.g., unclear revenue streams, high transaction costs) to investment in reforestation.     

Infrared analysis for counterfeit electronic parts detection and supply chain validation

Within the electronics industry, counterfeit electronic components entering the supply chain have steadily become an increasing threat accounting for more than 8 % of global merchandise trade and an annual $600 billion enterprise. Currently, there are not many cost-effective and nonintrusive solutions for counterfeit detection of electronic parts. In this paper, the authors present a statistical approach for detecting counterfeit components based on infrared (IR) analysis by the use of independent component analysis (ICA). As a prominent higher-order statistical analysis technique, ICA is capable of extracting relevant features from IR data. The latest applications and the extended algorithms of ICA have been elucidated for the purposes of classification and identification of counterfeit electronic parts. The theoretical framework of ICA is presented along with extensive experimental results to illustrate its feature extraction function in counterfeit electronic parts detection.     

Cadmium- and calcium-mediated toxicity in rainbow trout (Oncorhynchus mykiss) in vivo: interactions on fitness and mitochondrial endpoints

Rainbow trout were exposed to sublethal waterborne Cd (5 and 10 μg L⁻¹) and dietary Ca (60 mg g⁻¹), individually and in combination, for 30 d to elucidate the interactive effects and evaluate the toxicological significance of mitochondrial responses to these cations in vivo. Indices of fish condition and mortality were measured and livers, centers of metabolic homeostasis, were harvested to assess mitochondrial function and cation accumulation. All indices of condition assessed (body weight, hepatosomatic index and condition factor) were reduced in all the treatment groups. Mortality occurred in the Cd-exposed groups with dietary Ca partly protecting against and enhancing it in the lower and higher Cd exposure, respectively. State 3 mitochondrial respiration was inhibited by 30%, 35% and 40% in livers of fish exposed to Ca, Cd and Cd + Ca, respectively, suggesting reduced ATP turnover and/or impaired substrate oxidation. While the phosphorylation efficiency was unaffected, state 4 and state 4+ (+ oligomycin) respirations were inhibited by all the exposures. Mitochondrial coupling was reduced and transiently restored denoting partially effective compensatory mechanisms to counteract Cd/Ca toxicity. The respiratory dysfunction was associated with accumulation of both Cd and Ca in the mitochondria. Although fish that survived acute effects of Cd and Ca exposure apparently made adjustments to energy generation such that liver mitochondria functioned more efficiently albeit at reduced capacity, reduced fitness was persistent possibly due to increased demands for maintenance and defense against toxicity. Overall, interactions between Cd and Ca on condition indices and mitochondrial responses were competitive or cooperative depending on exposure concentrations and duration.     

Greenhouse gas fluxes from an irrigated sweet corn (Zea mays L.)-potato (Solanum tuberosum L.) rotation

Intensive agriculture and increased N fertilizer use have contributed to elevated emissions of the greenhouse gases carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O). In this study, the exchange of CO(2), N(2)O, and CH(4) between a Quincy fine sand (mixed, mesic Xeric Torripsamments) soil and atmosphere was measured in a sweet corn (Zea mays L.)-sweet corn-potato (Solanum tuberosum L.) rotation during the 2005 and 2006 growing seasons under irrigation in eastern Washington. Gas samples were collected using static chambers installed in the second-year sweet corn and potato plots under conventional tillage or reduced tillage. Total emissions of CO(2)-C from sweet corn integrated over the season were 2071 and 1684 kg CO(2)-C ha(-1) for the 2005 and 2006 growing seasons, respectively. For the same period, CO(2) emissions from potato plots were 1571 and 1256 kg of CO(2)-C ha(-1). Cumulative CO(2) fluxes from sweet corn and potato fields were 17 and 13 times higher, respectively, than adjacent non-irrigated, native shrub steppe vegetation (NV). Nitrous oxide losses accounted for 0.5% (0.55 kg N ha(-1)) of the applied fertilizer (112 kg N ha(-1)) in corn and 0.3% (0.59 kg N ha(-1)) of the 224 kg N ha(-1) applied fertilizer. Sweet corn and potato plots, on average, absorbed 1.7 g CH(4)-C ha(-1) d(-1) and 2.3 g CH(4)-C ha(-1) d(-1), respectively. The global warming potential contributions from NV, corn, and potato fields were 459, 7843, and 6028 kg CO(2)-equivalents ha(-1), respectively, for the 2005 growing season and were 14% lower in 2006.     

Assessing the impact of nano- and micro-scale zerovalent iron particles on soil microbial activities: particle reactivity interferes with assay conditions and interpretation of genuine microbial effects

The effects of nano-scale and micro-scale zerovalent iron (nZVI and mZVI) particles on general (dehydrogenase and hydrolase) and specific (ammonia oxidation potential, AOP) activities mediated by the microbial community in an uncontaminated soil were examined. nZVI (diameter 12.5 nm; 10 mg g⁻¹ soil) apparently inhibited AOP and nZVI and mZVI apparently stimulated dehydrogenase activity but had minimal influence on hydrolase activity. Sterile experiments revealed that the apparent inhibition of AOP could not be interpreted as such due to the confounding action of the particles, whereas, the nZVI-enhanced dehydrogenase activity could represent the genuine response of a stimulated microbial population or an artifact of ZVI reactivity. Overall, there was no evidence for negative effects of nZVI or mZVI on the processes studied. When examining the impact of redox active particles such as ZVI on microbial oxidation-reduction reactions, potential confounding effects of the test particles on assay conditions should be considered.