A passive flux denuder for evaluating emissions of ammonia at a dairy farm

Passive samplers have been shown to be an inexpensive alternative to direct sampling. Diffusion denuders have been developed to measure the concentration of species such as ammonia (NH3), which is in equilibrium with particulate ammonium nitrate. Conventional denuder sampling has required active sampling that inherently requires air pumps and, therefore, electrical power. To estimate emissions of NH3 from a fugitive source would require an array of active samplers and meteorological measurements to estimate the flux. A recently developed fabric denuder was configured in an open tube to passively sample NH3 flux. Passive and active samplers were collocated at a dairy farm at the California State University, Fresno, Agricultural Research Facility. During this comparison study, NH3 flux measurements were made at the dairy farm lagoon before and after the lagoon underwent acidification. Comparisons were made of the flux measurements obtained directly from the passive flux denuder and those calculated from an active filter pack sampler and wind velocity. The results show significant correlation between the two methods, although a correction factor needed to be applied to directly compare the two techniques. This passive sampling approach significantly reduces the cost and complexity of sampling and has the potential to economically develop a larger inventory base for ambient NH3 emissions.     

Review and comparison of wetland impacts and mitigation requirements between New Jersey,USA, Freshwater Wetlands Protection Act and Section 404 of the Clean Water Act

A review of wetland impacts authorized under the New Jersey Freshwater Wetlands Protection Act (FWPA) was conducted based on permitting data compiled for the period 1 July 1988 to 31 December 1993. Data regarding the acreage of wetlands impacted, location of impacts by drainage basin and watershed, and mitigation were analyzed. Wetland impacts authorized and mitigation under New Jersey's program were evaluated and compared with Section 404 information available for New Jersey and other regions of the United States.Under the FWPA, 3003 permits were issued authorizing impacts to 234.76 ha (602.27 acres) of wetlands and waters. Compensatory mitigation requirements for impacts associated with individual permits required the creation of 69.20 ha. (171.00 acres), and restoration of 16.49 ha (40.75 acres) of wetlands. Cumulative impacts by watershed were directly related to levels of development and population growth.The FWPA has resulted in an estimated 67% reduction [44.32 ha (109.47 acres) vs 136.26 ha (336.56 acres)] in annual wetland and water impacts when compared with Section 404 data for New Jersey. For mitigation, the slight increase in wetland acreage over acreage impacted is largely consistent with Section 404 data.Based on this evaluation, the FWPA has succeeded in reducing the level of wetland impacts in New Jersey. However, despite stringent regulation of activities in and around wetlands, New Jersey continues to experience approximately 32 ha (79 acres) of unmitigated wetland impacts annually. Our results suggest that additional efforts focusing on minimizing wetland impacts and increasing wetlands creation are needed to attain a goal of no net loss of freshwater wetlands.     

鉴定、授权和加密术在发展安全行业技术方面的作用

美国商务部国家标准与技术学会日前发布了PIV卡的最终规范.据悉,所有联邦雇员与承包商在2006年10月27日将全部要求使用此卡.     

Water management decision makers' evaluations of uncertainty in a decision support system: the case of WaterSim in the Decision Theater

Model-based decision support systems are increasingly used to link knowledge to action for environmental decision making. How stakeholders perceive uncertainty in models and visualisations affects their perceptions of credibility, relevance and usability of these tools. This paper presents a case study of water decision makers’ evaluations of WaterSim, a dynamic water simulation model presented in an immersive decision theatre environment. Results reveal that decision makers’ understandings of uncertainty in their evaluations of decision support systems reflect both scientific and political discourse. We conclude with recommendations for design and evaluation of decision support systems that incorporate decision makers' views.     

Arsenic tolerances in rice (Oryza sativa) have a predominant role in transcriptional regulation of a set of genes including sulphur assimilation pathway and antioxidant system

World wide arsenic (As) contamination of rice has raised much concern as it is the staple crop for millions. Four most commonly cultivated rice cultivars, Triguna, IR-36, PNR-519 and IET-4786, of the West Bengal region were taken for a hydroponic study to examine the effect of arsenate (As^V) and arsenite (As^III) on growth response, expression of genes and antioxidants vis-à-vis As accumulation. The rice genotypes responded differentially under As^V and As^III stress in terms of gene expression and antioxidant defences. Some of the transporters were up-regulated in all rice cultivars at lower doses of As species, except IET-4786. Phytochelatin synthase, GST and γ-ECS showed considerable variation in their expression pattern in all genotypes, however in IET-4786 they were generally down-regulated in higher As^III stress. Similarly, most of antioxidants such as superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), catalase (CAT), monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR) increased significantly in Triguna, IR-36 and PNR-519 and decreased in IET-4786. Our study suggests that Triguna, IR-36 and PNR-519 are tolerant rice cultivars accumulating higher arsenic; however IET-4786 is susceptible to As-stress and accumulates less arsenic than other cultivars.     

Occurrence and effects of tire wear particles in the environment--a critical review and an initial risk assessment

This review summarizes the existing knowledge on the occurrence of tire wear particles in the environment, and their ecotoxicological effects. A meta-analysis on tire components in the environment revealed that tire wear particles are present in all environmental compartments, including air, water, soils/sediments, and biota. The maximum Predicted Environmental Concentrations (PECs) of tire wear particles in surface waters range from 0.03 to 56 mg l⁻¹ and the maximum PECs in sediments range from 0.3 to 155 g kg⁻¹ d.w. The results from our previous long-term studies with Ceriodaphnia dubia and Pseudokirchneriella subcapitata were used to derive Predicted No Effect Concentrations (PNECs). The upper ranges for PEC/PNEC ratios in water and sediment were >1, meaning that tire wear particles present potential risks for aquatic organisms. We suggest that management should be directed towards development and production of more environmentally friendly tires and improved road runoff treatment.     

Characterization of DDT in factory effluent by thin-layer chromatography

Thin-layer chromatography (TLC) is shown as an effective, inexpensive, reliable, and less time consuming technique for simple and effective monitoring of persistent toxicant-like DDT in its manufacturing plant effluent. Aqueous untreated and treated grab and composit effluent samples were collected, extracted with a solvent and concentrated and chromatographed both for qualitative and quantitative analysis for p, p′-DDT and related compounds. This technique was successful and can form an effective, inexpensive method to be used by the developing countries, which have limited financial resources.     

Comparative acute toxicity of leachates from plastic products made of polypropylene, polyethylene, PVC, acrylonitrile–butadiene–styrene, and epoxy to Daphnia magna

Purpose

The large global production of plastics and their presence everywhere in the society and the environment create a need for assessing chemical hazards and risks associated with plastic products. The aims of this study were to determine and compare the toxicity of leachates from plastic products made of five plastics types and to identify the class of compounds that is causing the toxicity.

Methods

Selected plastic types were those with the largest global annual production, that is, polypropylene, polyethylene, and polyvinyl chloride (PVC), or those composed of hazardous monomers (e.g., PVC, acrylonitrile?Cbutadiene?Cstyrene [ABS], and epoxy). Altogether 26 plastic products were leached in deionized water (3?days at 50°C), and the water phases were tested for acute toxicity to Daphnia magna. Initial Toxicity Identification Evaluations (C18 filtration and EDTA addition) were performed on six leachates.

Results

For eleven leachates (42%) 48-h EC50s (i.e the concentration that causes effect in 50 percent of the test organisms) were below the highest test concentration, 250 g plastic/L. All leachates from plasticized PVC (5/5) and epoxy (5/5) products were toxic (48-h EC50s ranging from 2 to 235?g plastic/L). None of the leachates from polypropylene (5/5), ABS (5/5), and rigid PVC (1/1) products showed toxicity, but one of the five tested HDPE leachates was toxic (48-h EC50 17?C24?g plastic/L). Toxicity Identification Evaluations indicated that mainly hydrophobic organics were causing the toxicity and that metals were the main cause for one leachate (metal release was also confirmed by chemical analysis).

Conclusions

Toxic chemicals leached even during the short-term leaching in water, mainly from plasticized PVC and epoxy products.     

PM2.5 source apportionment: reconciling receptor models for U.S. nonurban and urban long-term networks

Chemical mass balance (CMB) and trajectory receptor models were applied to speciated particulate matter with aerodynamic diameter < or =2.5 microm (PM2.5) measurements from Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]) and Interagency Monitoring of Protected Visual Environments (IMPROVE) monitoring network across the state of Minnesota as part of the Minnesota PM2.5 Source Apportionment Study (MPSAS). CMB equations were solved by the Unmix, positive matrix factorization (PMF), and effective variance (EV) methods, giving collective source contribution and uncertainty estimates. Geological source profiles developed from local dust materials were either incorporated into the EV-CMB model or used to verify factors derived from Unmix and PMF. Common sources include soil dust, calcium (Ca)-rich dust, diesel and gasoline vehicle exhausts, biomass burning, secondary sulfate, and secondary nitrate. Secondary sulfate and nitrate aerosols dominate PM2.5 mass (50-69%). Mobile sources outweigh area sources at urban sites, and vice versa at rural sites due to traffic emissions. Gasoline and diesel contributions can be separated using data from the STN, despite significant uncertainties. Major differences between MPSAS and earlier studies on similar environments appear to be the type and magnitude of stationary sources, but these sources are generally minor (<7%) in this and other studies. Ensemble back-trajectory analysis shows that the lower Midwestern states are the predominant source region for secondary ammoniated sulfate in Minnesota. It also suggests substantial contributions of biomass burning and soil dust from out-of-state on occasions, although a quantitative separation of local and regional contributions was not achieved in the current study. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for a summary of input data, Unmix and PMF factor profiles, and additional maps.