Fate and transport of phenol in a packed bed reactor containing simulated solid waste

An assessment of the risk to human health and the environment associated with the presence of organic contaminants (OCs) in landfills necessitates reliable predictive models. The overall objectives of this study were to (1) conduct column experiments to measure the fate and transport of an OC in a simulated solid waste mixture, (2) compare the results of column experiments to model predictions using HYDRUS-1D (version 4.13), a contaminant fate and transport model that can be parameterized to simulate the laboratory experimental system, and (3) determine model input parameters from independently conducted batch experiments. Experiments were conducted in which sorption only and sorption plus biodegradation influenced OC transport. HYDRUS-1D can reasonably simulate the fate and transport of phenol in an anaerobic and fully saturated waste column in which biodegradation and sorption are the prevailing fate processes. The agreement between model predictions and column data was imperfect (i.e., within a factor of two) for the sorption plus biodegradation test and the error almost certainly lies in the difficulty of measuring a biodegradation rate that is applicable to the column conditions. Nevertheless, a biodegradation rate estimate that is within a factor of two or even five may be adequate in the context of a landfill, given the extended retention time and the fact that leachate release will be controlled by the infiltration rate which can be minimized by engineering controls.     

Uncertainty from Model Calibration: Applying a New Method to Transport Energy Demand Modelling

Uncertainties in energy demand modelling originate from both limited understanding of the real-world system and a lack of data for model development, calibration and validation. These uncertainties allow for the development of different models, but also leave room for different calibrations of a single model. Here, an automated model calibration procedure was developed and tested for transport sector energy use modelling in the TIMER 2.0 global energy model. This model describes energy use on the basis of activity levels, structural change and autonomous and price-induced energy efficiency improvements. We found that the model could reasonably reproduce historic data under different sets of parameter values, leading to different projections of future energy demand levels. Projected energy use for 2030 shows a range of 44–95% around the best-fit projection. Two different model interpretations of the past can generally be distinguished: (1) high useful energy intensity and major energy efficiency improvements or (2) low useful energy intensity and little efficiency improvement. Generally, the first lead to higher future energy demand levels than the second, but model and insights do not provide decisive arguments to attribute a higher likelihood to one of the alternatives.     

Removal of highly polar micropollutants from wastewater by powdered activated carbon

Due to concerns about ecotoxicological effects of pharmaceuticals and other micropollutants released from wastewater treatment plants, activated carbon adsorption is one of the few processes to effectively reduce the concentrations of micropollutants in wastewater. Although aimed mainly at apolar compounds, polar compounds are also simultaneously removed to a certain extent, which has rarely been studied before. In this study, adsorption isotherm and batch kinetic data were collected with two powdered activated carbons (PACs) to assess the removal of the polar pharmaceuticals 5-fluorouracil (5-Fu) and cytarabine (CytR) from ultrapure water and wastewater treatment plant effluent. At pH?7.8, single-solute adsorption isotherm data for the weak acid 5-Fu and the weak base CytR showed that their adsorption capacities were about 1 order of magnitude lower than those of the less polar endocrine disrupting chemicals bisphenol A (BPA) and 17-α-ethinylestradiol (EE2). To remove 90 % of the adsorbate from a single-solute solution 14, 18, 70, and 87 mg?L^?1 of HOK Super is required for EE2, BPA, CytR, and 5-Fu, respectively. Effects of solution pH, ionic strength, temperature, and effluent organic matter (EfOM) on 5-Fu and CytR adsorption were evaluated for one PAC. Among the studied factors, the presence of EfOM had the highest effect, due to a strong competition on 5-Fu and CytR adsorption. Adsorption isotherm and kinetic data and their modeling with a homogeneous surface diffusion model showed that removal percentage in the presence of EfOM was independent on the initial concentration of the ionizable compounds 5-Fu and CytR. These results are similar to neutral organic compounds in the presence of natural organic matter. Overall, results showed that PAC doses sufficient to remove >90 % of apolar adsorbates were able to remove no more than 50 % of the polar adsorbates 5-Fu and CytR and that the contact time is a critical parameter.     

Light-induced degradation of perfluorocarboxylic acids in the presence of titanium dioxide

The UV-photon-induced degradation of heptafluorobutanoic acid was investigated in acidic aqueous solutions in the presence of titanium dioxide. Heptafluorobutanoic acid could be degraded with this photocatalyst in a light-induced reaction generating carbon dioxide and fluoride anions. Carbon dioxide evolution in a significant amount occurred only in the presence of molecular oxygen and the photocatalyst. The light-induced degradation of trifluoroacetic acid, pentafluoropropanoic acid, nonafluorobutanoic acid, pentadecafluorooctanoic acid, nonafluorobutanesulfonic acid, and heptadecafluorooctanesulfonic acid in the presence of titanium dioxide was also studied. The perfluorocarboxylic acids under investigation are degraded to generate CO(2) and fluoride anions while both perfluorinated sulfonic acids are persistent under the experimental conditions employed in this study. For all compounds photonic efficiencies of the mineralization reaction were estimated to be smaller than 1x10(-5). To increase the photocatalytic activity mixed systems containing homogeneous phosphotungstic acid and heterogeneous titanium dioxide catalysts were also investigated. In the mixtures of these two photocatalysts, the formation rate of CO(2) increased with illumination time.     

Costs and benefits of differences in the timing of greenhouse gas emission reductions

Most modelling studies that explore long-term greenhouse gas mitigation scenarios focus on cost-efficient emission pathways towards a certain climate target, like the internationally agreed target to keep global temperature increase below 2 °C compared to pre-industrial levels (the 2 °C climate target). However, different timing of reductions lead to different transient temperature increase over the course of the century and subsequently to differences in the time profiles of not only the mitigation costs but also adaptation costs and residual climate change damage. This study adds to the existing literature by focussing on the implication of these differences for the evaluation of a set of three mitigation scenarios (early action, gradual action and delayed action), all three limiting global temperature increase below 2 °C above pre-industrial levels, using different discount rates. The study shows that the gradual mitigation pathway is, for these discount rates, preferred over early or delayed action in terms of total climate costs and net benefits. The relative costs and benefits of the early or delayed mitigation action scenarios, in contrast, do strongly depend on the discount rate applied. For specific discount rates, these pathways might therefore be preferred for other reasons, such as reducing long-term uncertainty in climate costs by early action.     

The effect of different mitigation strategies on international financing of adaptation

Recent proposals at the UNFCCC meeting in Bali in December 2007 suggest that a 2% levy on the CDM could finance adaptation costs in developing regions. Other proposals include extending the scope of the levy to emissions trading. This study applies an Integrated Assessment Model to gain insight in the interactions between adaptation costs, residual damages and mitigation costs and to analyse the effectiveness of a 2% levy on both the CDM and emissions trading from developing countries. We show that adaptation is especially important in lower income regions where damages are higher. The revenues of a 2% levy strongly depend on both the climate mitigation target and the burden-sharing regime. A more stringent climate mitigation target results in more emissions trade and, in the longer run, less need for adaptation. Both factors increase the share of adaptation costs that can be funded. The burden-sharing regime strongly affects the revenues of a 2% levy as well: relatively more stringent targets for developed countries increase the revenues of a 2% levy. However, in the next two decades the share of adaptation that can be financed remains well below 20% in most cases. Additional funding mechanisms are therefore necessary to substantially finance adaptation costs in developing countries.     

Measuring and explaining the EU’s effect on national climate performance

ABSTRACT

To what extent has the European Union (EU) had a benign or retarding effect on what its member states would have undertaken in the absence of EU climate policies during 2008–2012? A measurement tool for the EU policy’s effect is developed and shows a benign average EU effect with considerable variation across countries. The EU’s policy effectiveness vis-à-vis its member states is explained by the EU’s non-compliance mechanism, the degree of usage of the Kyoto flexible mechanisms, and national pre-Kyoto emission reduction goals. Time-series cross-sectional analyses show that the EU’s non-compliance mechanism has no effect, while the ex-ante plans for using Kyoto flexible mechanisms and/or the ambitious pre-Kyoto emission reduction targets allow member states to escape constraints imposed by EU climate policy.     

Musterbildung bei Drosophila

Drosophila proved an excellent system to study molecular processes in establishing the body pattern of an embryo. Genes which are active during oogenesis provide localized cues which regulate a cascade of zygotic genes that determines the developmental fate of the blastoderm cells along the longitudinal axis of the embryo.     

Teil II: L?sungsans?tze für den landwirtschaftlichen Betrieb bei der Implementierung eines Umweltmanagementsystems

Zusammenfassung  Die Erfassung der Ist-Situation im Rahmen der Umweltprüfung bildet die Grundlage für effiziente Schritte im Rahmen der Implementierung von Umweltmanagementsystemen (UMS). Diese Basis-analyse stützt sich auf die Elemente Wirkungsaudit, Management-audit und Rechtsaudit. Durch die optimale Ausgestaltung einer Umweltprüfung wird bei der Implementierung eines UMS auch in der Landwirtschaft die Basis für einen maximalen Nutzen des Anwenders geschaffen. Dieser Nutzen ist etwa für den Betrieb in seinen Innenbeziehungen, die Transparenz der Betriebsabl?ufe, ?konomische Gesichtspunkte, wie z.B. Einsparpotentiale, Informationsgewinnung sowie Effizienzgesichtspunkte durch die Dokumentation der Ablauforganisation. Darüber hinaus nutzt ein UMS bei externen Anforderungen, wie z.B. beim Umgang mit der ?ffentlichkeit, Marktpartnern, der Stellung gegenüber Beh?rden, Deregulierung oder Haftungsminimierung.