Removal of olive mill waste water phenolics using a crude peroxidase extract from onion by-products

Olive mill waste water (OMWW) originating from a two-phase olive oil-producing plant was treated with a crude peroxidase extract prepared from onion solid by-products. The treatments were based on a 3 × 3 factorial design, employing a series of combinations of pH and H₂O₂, in order to identify optimal operational conditions. The treatment performance was assessed by estimating the removal percentage of total polyphenols. The model established produced a satisfactory fitting of the data (R ² = 0.94, p = 0.0158), while the second-order polynomial equation used to describe the process indicated that peroxidase-catalysed polyphenol removal in diluted OMWW is facilitated at relatively low pH and intermediate H₂O₂ values. A predicted value of 50.7 ± 9.5% removal was calculated under optimal operational conditions (pH 2.76, [H₂O₂] = 3.56 mM). Analysis of an untreated and an optimally treated sample by high performance liquid chromatography revealed that enzyme treatment brought about alteration in the original OMWW polyphenolic profile. The use of peroxidase from onion solid by-products is proposed as an alternative means that could have a prospect in bioremediation applications.     

The effect of olive mill wastewater on seed germination after various pretreatment techniques

Olive mill wastewater (OMW) management has been a major issue of environmental concern for olive oil producing countries. OMW can be a serious nuisance, when disposed of untreated, due to its significantly high organic load, its phytotoxic properties and its relatively low biodegradability. Field and plant irrigation with raw or pretreated OMW is an easy and relatively inexpensive method to treat and dispose of OMW. Typical pretreatment techniques could be comprised of phase separation through a settling basin, dilution with water, aeration to promote biological degradation and pH neutralization. A full factorial experimental design approach was used here to study the main effects and interactions of the above four pretreatment techniques on the germination of tomato and chicory seeds. Results of the study showed that the most statistically significant technique affecting OMW phytotoxicity is water dilution. The next most significant technique was aeration. In particular, phytotoxicity decreased with increased OMW dilution with water, when OMW was aerated and without pH adjustment. pH neutralization resulted in increased phytotoxicity. Settling did not significantly decrease the phytotoxicity of settled OMW and is therefore not considered necessary in an OMW management system in which plant irrigation is the goal. The interaction of aeration and pH was, marginally, the most significant two-way interaction for tomato seeds, while no interactions were significant when chicory seeds were used.     

Lead particle size and its association with firing conditions and range maintenance: implications for treatment

Six firing range soils were analyzed, representing different environments, firing conditions, and maintenance practices. The particle size distribution and lead (Pb) concentration in each soil fraction were determined for samples obtained from the backstop berms. The main factors that were found to influence Pb fragment size were the type of soil used to construct the berms and the type of weapon fired. The firing of high velocity weapons, i.e., rifles, onto highly angular soils induced significant fragmentation of the bullets and/or pulverization of the soil itself. This resulted in the accumulation of Pb in the finer soil fractions and the spread of Pb contamination beyond the vicinity of the backstop berm. Conversely, the use of clay as backstop and the use of low velocity pistols proved to be favorable for soil clean-up and range maintenance, since Pb was mainly present as large metallic fragments that can be recovered by a simple screening process. Other factors that played important roles in Pb particle size distribution were soil chemistry, firing distance, and maintenance practices, such as the use of water spray for dust suppression and deflectors prior to impact. Overall, coarse Pb particles provide much easier and more cost-effective maintenance, soil clean-up, and remediation via physical separation. Fine Pb particles release Pb more easily, pose an airborne Pb hazard, and require the application of stabilization/solidification treatment methods. Thus, to ensure sustainable firing range operations by means of cost-effective design, maintenance, and clean-up, especially when high velocity weapons are used, the above mentioned factors should be carefully considered.     

Personal deposited dose and its influencing factors at several Greek sites: an analysis in respect to seasonal and diurnal variations

Environmental Science and Pollution Research - The deposited dose in the human respiratory tract and its influencing factors were investigated for 8 urban/suburban locations within Greek cities. A...     

Monitoring particulate matter levels and climate conditions in a Greek sheep and goat livestock building

Atmospheric pollutants from livestock operations influence air quality inside livestock buildings and the air exhausted from them. The climate that prevails inside the building affects human and animal health and welfare, as well as productivity, while emissions from the building contribute to environmental pollution. The aim of this study was to examine the variation of two climatic parameters (namely temperature and relative humidity) and the levels of particulate matter of different sizes (PM10-PM2.5-PM1), as well as the relationships between them, inside a typical Greek naturally ventilated livestock building that hosts mainly sheep. The concentration of particles was recorded during a 45-day period (27/11-10/1), while temperature and relative humidity were observed during an almost 1-year period. The analysis revealed that the variation of outdoor weather conditions significantly influenced the indoor environment, as temperature and relative humidity inside the building varied in accordance to the outside climate conditions. Temperature remained higher indoors than outdoors during the winter and extremely low values were not recorded inside the building. However, the tolerable relative humidity levels recommended by the International Commission of Agricultural Engineering (CIGR) were fulfilled only in 47% of the hours during the almost 1-year period that was examined. This fact indicates that although temperature was satisfactorily controlled, the control of relative humidity was deficient. The concentration of particulate matter was increased during the cold winter days due to poor ventilation. The maximum daily average value of PM10, PM2.5 and PM1 concentration equaled to 363, 61 and 30?μg/m(3) respectively. The concentration of the coarse particles was strongly influenced by the farming activities that were daily taking place in the building, the dust resuspension being considered as the dominant source. A significant part of the fine particles were secondary, which the production of could be attributed to an increase in relative humidity levels. It is concluded that measures have to be adopted in order to achieve sufficient ventilation and to reduce particulate matter levels.     

Assessing the alteration of physicochemical characteristics in composted organic waste in a prototype decentralized composting facility

Environmental Science and Pollution Research - This article presents the pilot experience of an integrated biowaste management system developed in Tinos island, Greece, which promoted source...     

The use of tailor-made acidic deep eutectic solvents for preparation of quercetin-enriched extracts from onion solid wastes

The current examination dealt with the development of a methodology to produce quercetin, a multifunctional bio-flavonoid, by designing task-specific, highly acidic deep eutectic solvents, based on glycerol and natural organic acids. The purpose was to achieve a simultaneous hydrolysis of spiraeoside, the major quercetin glycoconjugate occurring in onion solid wastes, and quercetin extraction. After an initial performance screening, the combination of glycerol/oxalic acid was identified as the highest-performing system, and further investigation showed that the most efficacious molar ratio was glycerol/oxalic acid 3:1. Further study of hydrolysis/extractions conditions suggested 30 min, at 130°C, to be the best operating conditions, giving the highest yield of 19.65 mg quercetin per grams of dry mass. The extract obtained under these conditions displayed significantly enhanced antiradical activity, compared to control extracts prepared with water or aqueous ethanol. On the other hand, results on the ferric-reducing power were rather contradictory. It is proposed that such a methodology may be implemented to valorize onion solid wastes, for the production of extracts significantly enriched in quercetin, with increased antiradical properties.     

Future heat-related climate change impacts on tourism industry in Cyprus

Tourism is a vital sector of Cyprus economy, attracting millions of tourists every year and providing economic growth and employment for the country. The aim of this study was to investigate the impacts of projected climate change in the tourism industry in Cyprus (Republic of Cyprus) using both “Tourism Climate Index” (TCI) and “Beach Climate Index” (BCI). TCI refers to tourism activities mainly related to sightseeing, nature-based tourism, and religious tourism etc., while BCI represents beach tourism that constitutes 85 % of tourism activities in Cyprus. The projections of climate change impacts in tourism are performed for 2071–2100 period, using regional climate model output employing the A1B greenhouse gas emissions scenario. The 1961–1990 period is used as the control run to compare the respective results of the future projections. The significant warming anticipated in the distant future (increases in annual and summer temperatures close to 4 °C) will have adverse impacts on Cyprus tourism industry regarding sightseeing tourism. TCI results for the distant future period show only acceptable conditions for general tourism activities during summer in contrast with the good/very good conditions in the present climate. Conversely, this type of tourism seems to be benefited in shoulder seasons, i.e., during spring and autumn; TCI and hence tourist activities improve in the distant future in relation to the present climate. On the other hand, concerning beach tourism, future projections indicate that it will not be negatively affected by future climate change and any changes will be positive.     

Climate change impacts,vulnerability and adaptive capacity of the electrical energy sector in Cyprus

The purpose of this study was to investigate the climate change impacts, vulnerability and adaptive capacity of the electrical energy sector in Cyprus. Spatial vulnerability of the island was assessed using the degree-day indicator to investigate heating and cooling demands in the near future using daily temperature projections from regional climate models (RCMs). Using daily electrical energy consumption data for the present climate, an impact model linking consumption and temperature was constructed and this relationship was projected to the future climate using the data from the RCMs and assuming the same technology use. Our impact model results showed that for the period between November and April (‘cold period’), a decreasing trend in electrical energy consumption is evident due to warmer conditions in the near future, while for the period between May and October (‘warm period’), an increasing trend in electricity consumption is evident as warmer conditions dominate by 2050. Regarding the spatial vulnerability assessment, the cooling degree-day indicator testified that major increases in cooling demand, between 100 and 200 degree-days, are expected in inland and southern regions during the summer in the near future. In addition, increases of about 20–50 degree-days are anticipated during autumn. Conversely, energy demand for heating is projected to decrease during spring and winter, especially in the higher elevation parts of the island. More precisely, reductions of about 30–75 degree-days are projected during spring, while greater reductions of about 60–90 degree-days are expected during winter in heating demand, especially for in the near future. The ability of the energy sector to adapt and follow these changes was deemed to be satisfactory reducing the overall vulnerability of the sector to future climate change.     

Screening of Bangladeshi winter wheat (Triticum aestivum L.) cultivars for sensitivity to ozone

The sensitivity to ozone of ten Bangladeshi wheat cultivars was tested by exposing plants to eight ozone exposure regimes (50, 60, 80, 100, 120, 135, 150, and 200 ppb for 14, 11, 8, 6, 5, 4, 3, and 1 days, respectively, for 8 h/day) in controlled environment chambers. Visible leaf injury, dry weight, chlorophyll, carotenoid content, leaf greenness (SPAD value), quantum yield of photosynthesis, and stomatal resistance were measured to evaluate response. Shoot biomass, total chlorophyll, leaf greenness, and carotenoid content were reduced in ozone-exposed plants. Based on the results of principal component analysis (PCA)-biplot analysis, the order of sensitivity to ozone was: Akbar?>>?Sufi?≥?Bijoy?≥?Shatabdi?>?Bari-26?≥?Gourab?>?Bari-25?≥?Prodip?≥?Sourav?>>?Kanchan. The most important parameters to discriminate cultivars with respect to ozone sensitivity were visible injury and chlorophyll b/a ratio, whereas quantum yield of photosynthesis was less important. Differences in stomatal resistance were not a significant factor in ozone response. Regression of cultivars’ PCA scores against year of release revealed no trend, suggesting that ozone tolerance was not incorporated during cultivar breeding.