Economic and financial aspects of mine closure

Today, mine reclamation is a key component to a successful mine plan. Most of the industrialized nations have recognized the need to make mining activities relatively environmentally friendly, if they want to continue to benefit from the economic gains from mineral resource development. Countries such as the United States, Canada, Australia and South Africa are leaders in the field and have implemented relatively sophisticated legislation to ensure environmentally correct mine closure. These countries rely on a combination of strict control strategies and economic penalties to ensure compliance. Yet, from the firm's perspective, reclamation activities are counterproductive as they cut into profits. In order to attract economic development and earn much needed economic capital, most of the rest of the world, particularly the developing countries, lack effective mine closure legislation. The traditional command and control type of legislation that is sometimes used is either vague and therefore avoided, or not enforced appropriately, resulting in an undesirable level of environmental degradation. With the use of case studies from Brazil, this article shows that direct controls are effective in some instances and not in others. It proposes that economic and financial tools may be more effective than the traditional direct controls in getting firms to comply with environmental standards, particularly in developing countries where environmental compliance is more difficult to achieve. It explains the use of performance bonding as one type of economic incentive that has proven to be an effective environmental policy in mine planning and closure. The authors additionally push beyond the typical style of performance bonds to introduce a flexible bonding and insurance system that allows governments to maintain strict environmental standards but limits firms financial exposure during the mining process. Such a system learns from the successes of the industrialized countries that use performance bonding and is sensitive to the needs of developing nations to attract investment yet maintain environmental integrity.     

State of the art of post-consumer textile waste upcycling to reach the zero waste milestone

Environmental Science and Pollution Research - The textile industry is a large source of pollution due to the production of raw materials (natural and synthetic fibers), preparation and finishing...     

Roadside design assessment in an urban,low-density environment in the Gulf Cooperation Council region

Objectives: Proper roadside design is crucial in order to mitigate the consequences associated with single-vehicle run-off-road (SVROR) crashes. However, the Gulf Cooperation Council (GCC) region lacks in-depth, detailed information on its roadside design status. Hence, there is a need for an in-service evaluation of roadside design in the GCC region. The objective of this study is to assess the existing roadside design in a medium-sized, low-density city in the United Arab Emirates (UAE).

Methods: A multiyear crash database was used to identify 116 locations where SVROR injury crashes occurred between 2013 and 2016 in the city of Al Ain in the UAE. Visits to these locations were made in order to assess their roadside design. Subsequently, the collected data were analyzed. Roadside design was classified based on whether or not it deviated from roadside design guidelines. The guidelines adopted as a benchmark were those contained in the 2012 Abu Dhabi Department of Transport Roadside Design Guide (RDG) and/or those in the 2011 American Association of State Highway and Transportation Officials (AASHTO) RDG. It is worth stressing that local guidelines are heavily based on the 2011 AASHTO RDG.

Results: The study found that almost one quarter of all SVROR crashes resulted in injuries. The study also found that a staggering 80.17% of the SVROR injury crashes investigated occurred at locations where roadside design deviated from the benchmark. Lack of an adequate clear zone was the main cause of noncompliant locations. Most SVROR injury crash locations containing roadside design with deviations from the benchmark were located on roads with posted speed limits of 100 kph or higher. Light poles, trees, curbs, and barriers were the most harmful objects most often struck, and tree collisions accounted for the highest number of severe crashes. Ninety-four and 86% of all studied locations containing light poles and trees, respectively, were found to be noncompliant with the benchmark. Twenty-eight percent of all SVROR injury crashes involved a rollover. All rollovers were preceded by a collision with a tree, pole, guardrail, or curb. Forty-four percent of all rollover crashes resulted in severe injuries.

Conclusions: Significant revision of the existing roadside design not only in the area studied but throughout the UAE is recommended. The authors propose measures that may be useful in making roadside design in the area studied better align with the benchmark requirements.     

Photochemical Kinetic Modeling of Degradation of Aqueous Polyvinyl Alcohol in a UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> Photoreactor

This study presents a photochemical kinetics model to describe the degradation of water-soluble PVA (Polyvinyl Alcohol) polymer in a UV/H₂O₂ batch reactor. Under the effect of UV light, the photolysis of hydrogen peroxide into hydroxyl radicals can generate a series of polymer scission reactions. For a better understanding and analysis of the UV/H₂O₂ process in the cracking of the PVA macromolecules, a chemical reaction mechanism of the degradation process and a relevant photochemical kinetics model are developed to describe the disintegration of the polymer chains. Taking into account the probabilistic fragmentation of the polymer, the statistical moment approach is used to model the molar population balance of live and dead polymer chains. The model predicts the PVA molecular weight reduction, the acidity of the solution, and hydrogen peroxide residual. In addition to previously published data collected in this laboratory, a new set of experiments were conducted using a 500 mg/L PVA aqueous for different hydrogen peroxide/PVA ratios for model validation. Measurements of average molecular weights of the polymer, hydrogen peroxide concentrations and pH of the PVA solution were determinant factors in constructing a reliable photochemical model of the UV/H₂O₂ process. Experimental data showed a decrease in the PVA molecular weight and a buildup of the solution acidity. The experimental data also served to determine the kinetics rate constants of the PVA photochemical degradation and validate the model whose predictions are in good agreement with data. The model can provide a comprehensive understanding of the impact of the design and operational variables.     

Habitat quality affects stress responses and survival in a bird wintering under extremely low ambient temperatures

Animals normally respond to stressful environmental stimuli by releasing glucocorticoid hormones. We investigated whether baseline corticosterone (CORT), handling-induced corticosterone concentration(s), and body condition indices of members of willow tit (Poecile montanus) groups differed while wintering in old growth forests and managed young forests in mild weather conditions and during cold spells. Willow tits spend the winter season in non-kin groups in which dominant individuals typically claim their priority to access resources, while subordinate individuals may experience greater levels of stress and higher mortality, especially during cold spells. We captured birds to measure baseline CORT and levels of handling-induced CORT secretion after 20 min of capture. Willow tits in the young forests had higher baseline CORT and a smaller increase in CORT in response to capture than individuals in the old forests. Baseline CORT was higher in females and juvenile birds compared to adult males, whereas handling-induced CORT secretion did not differ between birds of different ages. During cold spells, baseline CORT of willow tits increased and handling-induced CORT secretion decreased, especially in birds in young forests. Willow tits’ survival was higher in the old forests, with dominant individuals surviving better than subordinates. Our results show that changes in CORT secretion reflect responses to habitat quality and climate harshness, indicating young managed coniferous forests as a suboptimal habitat for the willow tit.     

MAXIMIZING THE VALUE OF INFORMATION FOR GROUND WATER PROTECTION: THREE TEST CASES1

ABSTRACT: Public awareness of the importance of protecting the nation's water supplies is growing. Recent studies have shown a substantial increase in the perceived value of protecting water supplies for future use. In the Northeast, much of the water supply comes from ground water. This paper examines three test cases, each with different approaches for using geographic information systems (GIS) for ground water protection planning. In Wellfleet, Massachusetts, build-out scenarios were used to support regulatory and land acquisition decisions for siting a public water supply well. In Hadley, Massachusetts, the focus was on a decision support model for septic suitability assessment in support of regulatory efforts and infrastructure expansion. For Cortland County, New York, an interactive graphic user interface was created to facilitate the manipulation and recombination of a large volume of data by county officials to target ground water pollution prevention efforts. As personal computers become more powerful and inexpensive, and GIS data become more readily available, community and county governments are turning to GIS as a tool for developing comprehensive resource protection plans. Once appropriate data are input, a GIS can effectively and efficiently be used to derive outcomes of various land use plans and regulations.     

Application of EMF emission measurement techniques to wireless communications systems for compliance with directive 2004/40/EC.

Europe is the only region in the world with common legislative acts regulating exposure to electromagnetic fields (EMF) for both the general public and workers. Council Recommendation 1999/519/EC deals with the limitation of exposure of the general public to EMF (0 Hz-300 GHz). Directive 2004/40/EC regulates the minimum health and safety requirements regarding the exposure of workers to the risks arising from EMF. This paper discusses the general application of existing standards and recommendations in measurement techniques for determining compliance of measured exposure limit values and action values with those defined in 2004/40/EC.     

Comparison of Two Parametric Methods to Estimate Pesticide Mass Loads in California’s Central Valley1

Saleh, Dina K., David L. Lorenz, and Joseph L. Domagalski, 2010. Comparison of Two Parametric Methods to Estimate Pesticide Mass Loads in California’s Central Valley. Journal of the American Water Resources Association (JAWRA) 00(0):1‐11. DOI: 10.1111/j.1752‐1688.2010.00506.x Abstract: Mass loadings were calculated for four pesticides in two watersheds with different land uses in the Central Valley, California, by using two parametric models: (1) the Seasonal Wave model (SeaWave), in which a pulse signal is used to describe the annual cycle of pesticide occurrence in a stream, and (2) the Sine Wave model, in which first‐order Fourier series sine and cosine terms are used to simulate seasonal mass loading patterns. The models were applied to data collected during water years 1997 through 2005. The pesticides modeled were carbaryl, diazinon, metolachlor, and molinate. Results from the two models show that the ability to capture seasonal variations in pesticide concentrations was affected by pesticide use patterns and the methods by which pesticides are transported to streams. Estimated seasonal loads compared well with results from previous studies for both models. Loads estimated by the two models did not differ significantly from each other, with the exceptions of carbaryl and molinate during the precipitation season, where loads were affected by application patterns and rainfall. However, in watersheds with variable and intermittent pesticide applications, the SeaWave model is more suitable for use on the basis of its robust capability of describing seasonal variation of pesticide concentrations.     

Reducing fall risk by improving balance control: development, evaluation and knowledge-translation of new approaches

Problem

Falling is a leading cause of serious injury, loss of independence, and nursing-home admission in older adults. Impaired balance control is a major contributing factor.

Methods

Results from our balance-control studies have been applied in the development of new and improved interventions and assessment tools. Initiatives to facilitate knowledge-translation of this work include setting up a new network of balance clinics, a research-user network and a research-user advisory board.

Results

Our findings support the efficacy of the developed balance-training methods, balance-enhancing footwear, neuro-prosthesis, walker design, handrail-cueing system, and handrail-design recommendations in improving specific aspects of balance control.

Impact on Knowledge Users

A new balance-assessment tool has been implemented in the first new balance clinic, a new balance-enhancing insole is available through pharmacies and other commercial outlets, and handrail design recommendations have been incorporated into 10 Canadian and American building codes. Work in progress is expected to have further impact.     

Valorization of quartz powder for drying shrinkage and carbonation resistance of alkali-activated slag cement

Environmental Science and Pollution Research - Alkali-activated slag (AAS) cement is one type of alkali-activated binders free from Portland cement. The main problems of this type of cement are its...