Life cycle assessment of selective non-catalytic reduction (SNCR) of nitrous oxides in a full-scale municipal solid waste incinerator

Selective non-catalytic reduction (SNCR) of nitrous oxides in a full-scale municipal solid waste incinerator was investigated using LCA. The relationship between NO_x-cleaning and ammonia dosage was measured at the plant. Un-reacted ammonia - the ammonia slip - leaving the flue-gas cleaning system adsorbed to fly-ash or in the effluent of the acidic scrubber was quantified from the stoichiometric reaction of NO_x and ammonia assuming no other reaction products was formed. Of the ammonia slip, 37% was associated with the fly-ash and 63% was in the effluent of the acidic scrubber. Based on NO_x-cleaning efficiency, the fate of the ammonia slip as well as the environmental impact from ammonia production, the potential acidification and nutrient enrichment from NO_x-cleaning was calculated as a function of ammonia dosage. Since the exact fate of the ammonia slip could not be measured directly, a number of scenarios were set up ranging from “best case” with no ammonia from the slip ending up in the environment to “worst case” where all the ammonia slip eventually ended up in the environment and contributed to environmental pollution. In the “best case” scenario the highest ammonia dosage was most beneficial demonstrating that the environmental load associated with ammonia production is of minor importance. In contrast, in a “worst case” scenario” NO_x-cleaning using SNCR is not recommendable at all, since the impacts from the ammonia slip exceed the saved impacts from the NO_x removal. Increased dosage of ammonia for removal of NO_x is recommendable as long as less than 10-20% of the ammonia slip to the effluent of the acidic scrubber ends up in the environment and less than 40% of the slip to the fly-ash ends up in the environment. The study suggests that the actual fate of the ammonia slip is crucial, but since the release of the ammonia may take place during transport and at the facilities that treat the wastewater and treat the fly-ash this factor depends strongly on local conditions and may be hard to determine. Thus, LCA-modeling proved useful in assessing the balance between ammonia dosage and NO_x-removal in flue-gas cleaning from waste incineration.     

How should support for climate-friendly technologies be designed?

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive "decarbonization" of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

Emissions from heated indoor dust

Settled indoor dust was collected from a university building, and the fine fraction was heated in the temperature range of 50-250 degrees C. Emissions of compounds were analysed and identified in a system consisting of a thermal desorption unit coupled to a gas chromatograph-mass spectrometer (GC-MS). The heating took place in both an oxidative (air) and an inert (He) atmosphere. The results indicate that oxidation of adsorbed compounds occurred, as well as decomposition of the dust itself. The emission in air started somewhere between 150 and 200 degrees C, with aldehydes and ketones as the main compounds. When heated in the inert atmosphere, semivolatile organic compounds (SVOCs) were emitted at temperatures above 150 degrees C. These compounds were not found in the air system, probably due to oxidation. Based on the obtained results we recommend that the temperature of hot surfaces in indoor environments should be kept below 150 degrees C to avoid oxidation of indoor dust and minimise the emissions.     

A Baumol–Oates approach to solid waste taxation

A national Baumol–Oates tax on waste in Denmark helped achieve a reduction of 26% in net solid waste from 1987 to 1998. The tax, which is levied per ton of waste, was particularly effective as regards the heavier waste streams such as construction waste and garden waste. When it comes to industrial and commercial waste, there are indications that the waste tax is not sufficiently significant to induce changes in behavior, and that except for very waste-intensive enterprises, companies do not seem to be very price sensitive. For household waste, the impact of the tax can be improved where tariffs for garbage collection are weight based, rather than per unit. However, the waste sector is an area in which the price signals are modified and filtered by institutionalized practices in municipal administration, and in which true-cost pricing is not easy to achieve. Hence, the rational choice assumption of environmental economics needs to be supplemented by an institutional dimension to interpret responses to environmental taxes correctly. Received: July 13, 2001 / Accepted: October 2, 2001     

Preface

Water, Air, &; Soil Pollution: Focus -     

Landscape changes in agrarian landscapes in the 1990s: the interaction between farmers and the farmed landscape. A case study from Jutland, Denmark

Recent landscape changes in a farmed landscape are analysed and related to farm and farmer characteristics. It is assumed that farm and farmer characteristics serve as mediators of large scale or macro driving forces of change-in the present case, a changing farming context including demands for a more environmentally friendly farming practise and a reduced output. The results are based on multivariate analyses of data collected from structured interviews of 160 farmers in a case study area, in central Jutland, measuring 5000 ha. The analysis shows that farmers are highly involved in landscape changes. The investigated landscape changes include creation and removal of landscape elements as well as certain management changes. The most common activity was creation of elements: hedgerows, small woodlands and conversion of rotational arable land to permanent grassland, whereas removal of elements, mainly hedgerows and semi-natural grasslands, were seen less frequently. Management changes like abandonment of permanent grassland were widespread. The results indicate a general extensification of the land use and the authors interpret the results partly as an indication of a change from productivism to a more multifunctional agricultural regime. The observed landscape changes at the farm level show a low, but structured relationship with the current farm and farmer characteristics, meaning that landscape changes were undertaken by various farmers and on various farms. On a general level, however, the age of the farmer and the duration of farm ownership seem to have a major influence on the landscape changes.     

Declining extent of open-water refugia for top predators in Baffin Bay and adjacent waters

Global climate change is expected to severely impact Arctic ecosystems, yet predictions of impacts are complicated by region-specific patterns and nonuniform trends. Twentyfour open-water overwintering areas (or "microhabitats") were identified to be of particular importance for eight seabird and marine mammal species in the eastern Canadian High Arctic and Baffin Bay. Localized trends in the available fraction of open-water were examined in March during 1979--2001, derived from approximate sea ice concentrations from satellite-based microwave telemetry. Declines in the fraction of open-water were identified at microhabitats in Baffin Bay, Davis Strait, coastal West Greenland, and Lancaster Sound. Increases in open-water were observed in Hudson Bay, Hudson Strait, and Foxe Basin. The biological importance of each microhabitat was examined based on species distribution and abundance. Potential consequences of reduced open-water for top marine predators include impacts on foraging efficiency and oxygen and prey availability.     

Protective effect of different types of bicycle helmets

The effectiveness of bicycle helmets in preventing head injuries is well documented. There are different opinions about the effectiveness of helmets in preventing face injuries, and few studies have analyzed the effect of different types of helmets. This study was performed to examine the effect of different helmet types to head and face injuries. The use of helmets was analyzed in cyclists with head or face injuries and compared with two control groups. The main control group was cyclists that had injuries not including the head or neck, and another control group was cyclists that had been involved in an accident, regardless of whether they had sustained any injury. Cross-table and logistic regression analyses were applied to analyze the protective effect of helmets. A total of 991 injured patients served as a basis for this study. Most of the accidents, (82%) were single accidents with no other persons involved. Of patients with injuries to the head, excluding face, 11.4% had been using hard shell helmets, and 9.6% had been using foam helmets at the time of the accident. Among the emergency room controls, the proportion of hard shell helmet users and foam helmet users was 26.4% and 11.4%, respectively. Compared to non-helmet users, this gave an odds ratio of 0.36 (CI = 0.21-0.60) for getting head injuries if the cyclists had been using hard shell helmets at the time of the injury, and 0.83 (CI = 0.41-1.67) for users of foam helmets. The odds ratio for getting face injuries was 0.90 (CI = 0.58-1.41) among users of hard shell helmets, and 1.87 (CI = 1.03-3.40) for users of foam helmets. The use of hard shell helmets reduced the risk of getting injuries to the head. Children less than nine years old that used foam helmets had an increased risk of getting face injuries. All bicyclists should be recommended to use hard shell bicycle helmets while cycling.