Uptake of some selected aquatic pollutants in semipermeable membrane devices (SPMDs) and the polar organic chemical integrative sampler (POCIS)

The uptake characteristics of semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCISs) were examined for mono, di and tributyltin, triphenyltin, pyrene, benzo[a]pyrene, 4-tert-butylphenol, 4-n-nonylphenol, PCBs 77 and 153, PBDE 47, lindane, triclosan and DDT. Exposure in a flow through system continued for 28 days with samplers removed every 7 days in order to study the relevant uptake kinetics. Uptake remained linear for POCISs with sampling rates (Rs) of up to 0.2 L d(-1). For SPMDs uptake varied from linear to approaching equilibrium with Rs values of up to 14 L d(-1). 7 out of 9 results for SPMDs could be explained by an empirical model (nonylphenol and lindane were exceptions). None of the four organo-tin compounds studied were detected in POCISs and only tributyltin was accumulated significantly by SPMDs. The establishment of these sampling rates allows the calculation of time weighted water concentrations for several important contaminants. Using presented methods, sampling rates and exposure conditions, theoretical detection limits for selected compounds by SPMDs were between 11-68 pg L(-1), which is well below the environment quality standard proposed for those compounds that are included in the European Water Framework Directive.     

Feeding and cleaning mechanisms in the suspension feeding bivalve Mytilus edulis

Feeding and pseudofeces formation were studied in intact Mytilus edulis clearing suspensions of graphite particles, and the processes were compared with activities observed in mussels with a severed adductor muscle. Most particulate material in the stomach was present in the suspended state. Ingestion of particles in suspension could take place concurrently with the production of pseudofeces. Severing of the adductor muscle resulted in profuse secretion of mucus that gradually subsided to a constant low level. Addition of graphite particles at concentrations that did not cause mucus secretion in the intact mussels strongly stimulated secretion in the operated mussels, resulting in the accumulation of highly viscid, mucusparticle aggregates. These aggregates were mechanically stable, in contrast to the fragile pseudofeces. It is indicated that normal feeding depends upon hydromechanical mechanisms that produce highly concentrated suspensions of particles for ingestion, and that mucociliary mechanisms serve to clean the gills and other organs of the mantle cavity for excess particulate material. It is further indicated that intact mussels secrete mucus only in the amounts needed to consolidate excess particulate material, and that lesions affect the normal balance between particles in suspension and mucus secretion by enhancing the sensitivity of the mechanisms that control mucus secretion.     

Multi-elemental EDXRF mapping of polluted soil from former horticultural land

The distribution of major and trace elements was systematically investigated by use of energy dispersive X-ray fluorescence spectrometry (EDXRF) on a former horticultural soil. The purpose of the study was to combine mapping of soil element concentration levels with multivariate statistics for characterisation of soil metal pollution in relation to previous and present land use. A 1-ha study site was chosen from a former horticulture where a previous preliminary survey indicated increased concentration levels of toxic elements. The soil was sampled from the top 20 cm of the soil surface in a 10 x 10-m grid-like pattern covering the 1-ha study area. In addition, three soil profiles were studied. The elemental composition of the soil samples was investigated by EDXRF while the composition of aqueous soil extracts was determined by total reflection X-ray fluorescence spectrometry (TXRF). Based on mapping and multivariate statistically analysis of the data obtained by EDXRF, most elements were found in almost constant concentration levels in the top soil throughout the investigated site. However, the contents of the toxic elements Zn, Cu, As, and Pb were found to vary significantly within the area. Hence, the samples with high accumulations of As also contained relatively high amounts of Zn, Cu, and Pb, which indicates that toxic-element-containing pesticides have been applied to the soil surface in the area of the former green houses at the study site. The Pb/As mass ratio in the soil indicates that PbHAsO3 was the preferential lead arsenate used for pest management at the investigated site, while Cu as Bordeaux liquid (CuSO4) and Zn were applied to minimize the leaf damaging effect from the former compounds. Calculations indicated that As annually was applied to the soil in the former greenhouses in doses up to 4 kg As/ha while Pb had been annually applied in doses up to 12 kg Pb/ha. The enrichment of Zn, Cu, As and Pb was greatest in the top 20 cm of the soil and no anthropogenic enrichment of these elements occurred below a depth of 50 cm, indicating that the toxic elements are rather immobile in this soil. The results of this investigation suggest that EDXRF used in combination with multivariate statistics is a strong tool for multi-element mapping of elemental contents, sources and mobility in the terrestrial environment.     

Identifying optimal agricultural countermeasure strategies for a hypothetical contamination scenario using the strategy model

A spatially implemented model designed to assist the identification of optimal countermeasure strategies for radioactively contaminated regions is described. Collective and individual ingestion doses for people within the affected area are estimated together with collective exported ingestion dose. A range of countermeasures are incorporated within the model, and environmental restrictions have been included as appropriate. The model evaluates the effectiveness of a given combination of countermeasures through a cost function which balances the benefit obtained through the reduction in dose with the cost of implementation. The optimal countermeasure strategy is the combination of individual countermeasures (and when and where they are implemented) which gives the lowest value of the cost function. The model outputs should not be considered as definitive solutions, rather as interactive inputs to the decision making process. As a demonstration the model has been applied to a hypothetical scenario in Cumbria (UK). This scenario considered a published nuclear power plant accident scenario with a total deposition of 1.7x10(14), 1.2x10(13), 2.8x10(10) and 5.3x10(9)Bq for Cs-137, Sr-90, Pu-239/240 and Am-241, respectively. The model predicts that if no remediation measures were implemented the resulting collective dose would be approximately 36 000 person-Sv (predominantly from 137Cs) over a 10-year period post-deposition. The optimal countermeasure strategy is predicted to avert approximately 33 000 person-Sv at a cost of approximately 160 million pounds. The optimal strategy comprises a mixture of ploughing, AFCF (ammonium-ferric hexacyano-ferrate) administration, potassium fertiliser application, clean feeding of livestock and food restrictions. The model recommends specific areas within the contaminated area and time periods where these measures should be implemented.     

Linking a one-dimensional pesticide fate model to a three-dimensional groundwater model to simulate pollution risks of shallow and deep groundwater underlying fractured till

The one-dimensional pesticide fate model MACRO was loose-linked to the three-dimensional discrete fracture/matrix diffusion model FRAC3DVS to describe transport of the pesticide mecoprop in a fractured moraine till and local sand aquifer (5-5.5 m depth) overlying a regional limestone aquifer (16 m depth) at Havdrup, Denmark. Alternative approaches to describe the upper boundary in the groundwater model were examined. Field-scale simulations were run to compare a uniform upper boundary condition with a spatially variable upper boundary derived from Monte-Carlo simulations with MACRO. Plot-scale simulations were run to investigate the influence of the temporal resolution of the upper boundary conditions for fluxes in the groundwater model and the effects of different assumptions concerning the macropore/fracture connectivity between the two models. The influence of within-field variability of leaching on simulated mecoprop concentrations in the local aquifer was relatively small. A fully transient simulation with FRAC3DVS gave 20 times larger leaching to the regional aquifer compared to the case with steady-state water flow, assuming full connectivity with respect to macropores/fractures across the boundary between the two models. For fully transient simulations 'disconnecting' the macropores/fractures at the interface between the two models reduced leaching by a factor 24. A fully connected, transient simulation with FRAC3DVS, with spatially uniform upper boundary fluxes derived from a MACRO simulation with 'effective' parameters is therefore recommended for assessing leaching risks to the regional aquifer, at this, and similar sites.