Reducing the environmental impact of methane emissions from dairy farms by anaerobic digestion of cattle waste

Four dairy cattle farms considered representative of Northern Spain milk production were studied. Cattle waste was characterised and energy consumption in the farms was inventoried. Methane emissions due to slurry/manure management and fuel consumption on the farms were calculated. The possibility of applying anaerobic digestion to the slurry to minimise emissions and of using the biogas produced to replace fossil fuels on the farm was considered. Methane emissions due to slurry management (storage and use as fertiliser) ranged from 34 to 66 kg CH₄ cow⁻¹ year⁻¹ for dairy cows and from 13 to 25 kg CH₄ cow⁻¹ year⁻¹ for suckler calves. Cattle on these farms are housed for most of the year, and the contribution from emissions from manure dropped in pastures is insignificant due to the very low methane conversion factors. If anaerobic digestion were implemented on the farms, the potential GHG emissions savings per livestock unit would range from 978 to 1776 kg CO₂ eq year⁻¹, with the main savings due to avoided methane emissions during slurry management. The methane produced would be sufficient to supply digester heating needs (35-55% of the total methane produced) and on-farm fuel energy requirements.     

Distribution of polychlorinated biphenyls in both products and by-products of a mussel shell incinerator facility

Purpose  

Solid waste incineration has recently attracted much attention because the combustion process involved produces highly toxic organohalogen contaminants such as dioxin-like polychlorinated biphenyls (DL-PCBs) present in fly ash. This has raised the need for simple, rapid, accurate methods for monitoring PCBs in ash samples.     

Semifield assessment of the runoff potential and environmental risk of the parasiticide drug ivermectin under Mediterranean conditions

Introduction  

The antiparasitic ivermectin is of particular concern to regulatory agencies. Ivermectin can reach the environment through the direct emission of dung from livestock on pasture and via manure application on agricultural lands.     

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incineration (MSWI) bottom ash (BA) and air pollution control (APC) fly ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behavior whilst maximizing the reuse of APC fly ash was considered and assessed. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC fly ash content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.     

Heavy metals concentrations in zooplankton and suspended particulate matter in a southwestern Atlantic temperate estuary (Argentina)

The present work includes part of the first studies of metals concentrations in the zooplankton from a heavily industrialized estuary of Argentina, the Bahía Blanca estuary. Cd, Cu, and Pb concentrations in the zooplankton (macro- and mesozooplankton) and the suspended particulate matter were measured at stations with different degree of pollution. Physicochemical variables and zooplankton composition and abundance were also analyzed. Thus, the aim of the present work was to analyze the spatial and temporal distribution of heavy metals in these two different fractions, and the possible relation among them due to their importance in the biogeochemical cycles of marine environments. Samplings were carried out during a year, from March 2005 to April 2006, every 2 months, at stations located near chemical and petrochemical industries, stations far from these points and one station in an intermediate location. In the mesozooplankton, the mean concentrations of Cd, Cu, and Pb were 3.63?±?1.46, 34.46?±?5.40, and 11.54?±?3.04 μg?g^?1 dry weight (d.w.) respectively, while in the macrozooplankton, 3.20?±?2.28, 21.86?±?4.79, and 8.36?±?1.85 μg?g^?1 d.w. On the other hand, particulate Cd, Cu, and Pb presented a mean concentration of 3.33?±?1.22, 12.75?±?2.67, and 12.53?±?3.20 μg?g^?1 d.w., respectively. Metals’ levels in both the SPM and zooplankton fluctuated throughout the study time and were relatively high in the particulate phase especially for Cu and Pb. Moreover, zooplankton accumulated important concentrations of the three metals. The sources of them are probably the discharges of the industries and domestic sewages located near the estuary.     

Using iron-loaded sepiolite obtained by adsorption as a catalyst in the electro-Fenton oxidation of Reactive Black 5

This study explores the possibility of using iron-loaded sepiolite, obtained by recovering iron from polluted water, as a catalyst in the electro-Fenton oxidation of organic pollutants in textile effluents. The removal of iron ions from aqueous solution by adsorption on sepiolite was studied in batch tests at iron concentrations between 100 and 1,000 ppm. Electro-Fenton experiments were carried out in an electrochemical cell with a working volume of 0.15 L, an air flow of 1 L/min, and 3 g of iron-loaded sepiolite. An electric field was applied using a boron-doped diamond anode and a graphite sheet cathode connected to a direct current power supply with a constant potential drop. Reactive Black 5 (100 mg/L) was selected as the model dye. The adsorption isotherms proved the ability of the used adsorbent. The removal of the iron ion by adsorption on sepiolite was in the range of 80–100 % for the studied concentration range. The Langmuir and Freundlich isotherms were found to be applicable in terms of the relatively high regression values. Iron-loaded sepiolite could be used as an effective heterogeneous catalyst for the degradation of organic dyes in the electro-Fenton process. Successive batch processes were performed at optimal working conditions (5 V and pH 2). The results indicate the suitability of the proposed combined process, adsorption to iron remediation followed by the application of the obtained iron-loaded sepiolite to the electro-Fenton technique, to oxidize polluted effluents.     

Development of the DGT technique for Hg measurement in water: comparison of three different types of samplers in laboratory assays

The Diffusive Gradients in Thin films (DGT) technique is an operationally defined method to determine the dissolved fraction of trace elements in water. The aim of this study was to develop this technique for the measurement of the bioavailable mercury species in natural waters. For that purpose, three types of DGT units (commercial, manufactured with agarose diffusive gel (DG) and manufactured with polyacrylamide DG) were tested under controlled conditions using an Hg(II) solution both with and without dissolved organic matter (DOM). An acid digestion method using aqua regia was optimised to efficiently digest the resin gel discs prior to analysis. A good performance was obtained for the three DGT types when deployed in a DOM-free mercury solution in the laboratory, and it was demonstrated that polyacrylamide gel can be used as diffusive layer for mercury sampling. However, when the DGT units were deployed in a mercury solution containing DOM, performance differences were observed. Furthermore, the mass of background mercury (blanks) varied among the different DGT types. In the light of the results, the devices manufactured with polyacrylamide DG seemed to be the best choice for dissolved mercury determination.     

Atmospheric influence on the distribution of organic pollutants in the Guadalquivir River estuary, SW Spain

In the lower Guadalquivir river basin, a system stressed by a wide variety of anthropogenic activities, eight pesticides (four triazines, two chloroacetanilide herbicides, one organochlorine, and one organophosphorus insecticide); and four emerging pollutants (two personal care products, one organophosphorous flame retardant, and one xanthine alkaloid) were analyzed in river water during a 2-year monitoring program, and after rain episodes. Samples were extracted using the solid phase extraction (SPE) technique prior to determination of compounds using gas chromatograph coupled to a mass spectrometer detector. Except for caffeine, recoveries were mostly above 80 %, while limits of detection and quantification were in the low nanograms per liter level (except for dimethoate). Terbuthylazine, simazine (triazine herbicides), and dimethoate (organophosphorus insecticide), present in agrochemicals, were predominant in the river water, although concentrations were below the quality standards established by the EU Water-Framework-Directive. A general trend to increase concentration was observed after rain events, in particular for pesticides, possibly as a consequence of surface runoff.     

Correlation between physicochemical and ecotoxicological approaches to estimate landfill leachates toxicity

Leachates from municipal solid waste (MSW) landfills may contain a huge diversity of contaminants; these wastewaters should be considered as potentially hazardous complex mixtures, representing a potential environmental risk for surface and groundwater. Current MSW landfill wastes regulatory approaches deem exclusively on the physicochemical characterization and does not contemplate the ecotoxicological assessment of landfill leachates. However, the presence of highly toxic substances in consumer products requires reconsideration on the need of more specific ecotoxicological assessments. The main aim of this study was to evaluate the toxicity of different MSW landfill leachates using a battery of toxicity tests including acute toxicity tests with Daphnia magna and the anuran Xenopus laevis and the in vitro toxicity test with the fish cell line RTG-2. The additional objective was to study the possible correlation between physicochemical properties and the toxicity results obtained for untreated landfill leachates. The results showed that the proposed test battery was effective for the ecotoxicological characterization of MSW landfill leachates. A moderate to strong correlation between the measured physicochemical parameters and the calculated toxicity units was detected for all toxicity assays. Correlation factors of 0.85, 0.86 and 0.55 for Daphnia, Xenopus and RTG-2 tests, respectively, were found. The discriminant analysis showed that certain physicochemical parameters could be used for an initial categorization of the potential aquatic acute toxicity of leachates; this finding may facilitate leachates management as the physicochemical characterization is currently the most common or even only monitoring method employed in a large majority of landfills. Ammonia, alkalinity and chemical oxygen demand (COD), together with chloride, allowed a proper categorization of leachates toxicity for up to 75% of tested samples, with a small percentage of false negatives.