The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.     

An evaluation of fishery co-management experience in an Amazonian black-water river (Unini River,Amazon, Brazil)

We evaluated the implementation of a fishing agreement, which was created by negotiation among all users of the resources as a co-management strategy because its definition was a result of meetings between all users of the resources. The fishing agreement was implemented in Unini River, a tributary of the right bank of Negro River. Our approach was based on the perception of the people who live in that area, called ribeirinhos. The management strategy was based on spatial distribution of the different types of fishing. We used two logistic regression models to identify the variables which are important to determine the previous concordance and satisfaction with the agreement. First, we analyzed the initial effort to implement the agreement. The variable that influenced the decision of support for the agreement and satisfaction with the results of agreement in both models was the distance from the interviewee’s residence to the sport fishing area. The results showed that the perception of improvement in well-being of the communities and structured social organization are crucial for the success of the co-management strategy.     

Use of multitracers for the study of water mixing in the Paraíba do Sul River estuary

Multitracers were used to study water mixing in the Paraíba do Sul River estuary region in August 2007 (dry season) and March 2008 (rainy season) and to evaluate the reach of the river plume in the direction of the open ocean. Two sampling campaigns were carried out, each in a different season. Based on these results, it was possible to conclude that the multitracers used in this study (salinity, Si, Ba and U, as well as the radium isotopes ²²³Ra, ²²⁴Ra, ²²⁶Ra and ²²⁸Ra) presented satisfactory results toward defining the plume reach and determining the residence time and water-mixing processes in the estuary. A strong correlation was observed between tracers and the distance to the coast. During the low river water discharge period, the riverine water took about 10 days to reach open ocean waters (salinity ∼ 35). During the rainy period this value decreased to 6 days. Based on the radium results, it was possible to calculate diffusion coefficients (K_h) of 23 km² d⁻¹ and 38 km² d⁻¹ for ²²⁴Ra and ²²³Ra, respectively, during the dry season (winter). Values of 65 km² d⁻¹ and 68 km² d⁻¹ for ²²³Ra and ²²⁴Ra, respectively, were found for the rainy period (summer).     

Microbial degradation of 17β -estradiol and 17α -ethinylestradiol followed by a validated HPLC-DAD method

This work aimed at studying the biodegradation of two estrogens, 17α -estradiol (E2) and 17β -ethinylestradiol (EE2), and their potential metabolism to estrone (E1) by microbial consortia. The biodegradation studies were followed by High Performance Liquid Chromatography–Diode Array Detector (HPLC–DAD) using a specifically developed and validated method. Biodegradation studies of the estrogens (E2 and EE2) were carried out with activated sludge (consortium A, CA) obtained from a Wastewater Treatment Plant (WWTP) and with a microbial consortium able to degrade recalcitrant compounds, namely fluorobenzene (consortium B, CB). E2 was more extensively degraded than EE2 by CA whereas CB was only able to degrade E2. The addition of acetate as a supplementary carbon source led to a faster biodegradation of E2 and EE2. E1 was detected as a metabolite only during the degradation of E2. The 16S rRNA gene sequence analyses of strains recovered from the degrading cultures revealed the presence of the genera Pseudomonas, Chryseobacterium and Alcaligenes. The genera Pseudomonas and Chryseobacterium were retrieved from cultures supplied with E2 and EE2, while the genus Alcaligenes was found in the presence of E2, suggesting that they might be involved in the degradation of these compounds.     

Studies on degradation of 14C-DDT in the marine environment.

Degradation of 14C-DDT was studied in a marine ecosystem for 60 days and in marine sediments under moist and flooded conditions using a continuous flow system for a period of 130 days. 14C-DDT residues were recovered in sediments of the marine ecosystem at uniform level of 60-65% of the applied 14C-activity throughout the incubation period. DDD was a major metabolite in sediments while DDMU was a major metabolite in clams. Clams brought about substantial degradation of DDT. However, 14C-residues recovered form clams are not suggestive of significant bioaccumulation. In the continuous flow experiment, under both moist and flooded conditions, DDT underwent degradation and about 22% of the applied 14C-activity was recovered as volatiles under both conditions. In sediments, extractable 14C-residues accounted for about 30 and 19% under moist and flooded conditions, respectively. DDT was the major compound in extractable residues as identified by TLC-autoradiographic procedures. More bound residues were formed under flooded than under moist conditions.     

Use of the genus Artemia in ecotoxicity testing

Information related to varied uses of several species of the genus Artemia (commonly known as brine shrimp), is dispersed among literature from several scientific areas, such as Ecology, Physiology, Ecotoxicology, Aquaculture and Genetics. The present paper reviews information related to Artemia that may be considered relevant for ecotoxicity testing. Integration of different areas of scientific knowledge concerning biology, life cycle and environmental needs of Artemia is of crucial importance when considering the interpretation of results drawn from tests involving this genus. Furthermore, this paper provides suggestions to overcome problems related to toxicity assessment with the use of Artemia as test organism in bioassays, under the scope of estuarine, marine and hypersaline environments. Aspects related to variability in results, adoptable toxicity end-points, culture conditions, characteristics of species and strains, influence of geographical origins over physiological features and responses to exposure to chemical agents are considered.     

The issue of sustainability and disclosure. A case study of selective garbage collection by the Urban Cleaning Service of the city of Rio de Janeiro, Brazil - COMLURB

The Urban Cleaning Company of the City of Rio de Janeiro - COMLURB launched the Recycling Separation Center Project (Projeto Central de Separação de Recicláveis or CSR) in 2003. The objectives of the project were the adequate disposal of solid urban waste as well as the generation of employment and income. The COMLURB Project had economic, environmental and social facets, and the researchers sought to establish whether COMLURB had prepared reports that would enable evaluation of the investment made and the results obtained. In particular, the researchers sought to establish whether COMLURB financial statements set out the results of actions inherent to the CSR. We concluded from our analysis of the Project that the three elements of sustainability (social, environmental and economic), despite being fully present, were not adequately demonstrated. This study therefore proposes a model report with a view to enabling various information users to evaluate the results of the CSR Project.     

Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.