A Thermodynamic Geography: Night-Time Satellite Imagery as a Proxy Measure of Emergy

Night-time satellite imagery enables the measurement, visualization, and mapping of energy consumption in an area. In this paper, an index of the “sum of lights” as observed by night-time satellite imagery within national boundaries is compared with the emergy of the nations. Emergy is a measure of the solar energy equivalent used, directly or indirectly, to support the processes that characterize the economic activity in a country. Emergy has renewable and non-renewable components. Our results show that the non-renewable component of national emergy use is positively correlated with night-time satellite imagery. This relationship can be used to produce emergy density maps which enable the incorporation of spatially explicit representations of emergy in geographic information systems. The region of Abruzzo (Italy) is used to demonstrate this relationship as a spatially disaggregate case.     

Modeling Inorganic Aerosols and Their Response to Changes in Precursor Concentration in Mexico City

Abstract

Based on data from the 1997 Investigación sobre Materia Particulada y Deterioro Atmosférico-Aerosol and Visibility Evaluation Research (IMADA-EVER) campaign and the inorganic aerosol model ISORROPIA, the response of inorganic aerosols to changes in precursor concentrations was calculated. The aerosol behavior is dominated by the abundance of ammonia and thus, changes in ammonia concentration are expected to have a small effect on particle concentrations. Changes in sulfate and nitrate are expected to lead to proportional reductions in inorganic fine particulate matter (PM_2.5). Comparing the predictions of ISORROPIA with the observations, the lowest bias and error are achieved when the aerosols are assumed to be in the efflorescence branch. Including crustal species reduces the bias and error for nitrate but does not improve overall model performance. The estimated response of inorganic PM_2.5 to changes in precursor concentrations is affected by the inclusion of crustal species in some cases, although average responses are comparable with and without crustal species. Observed concentrations of particle chloride suggest that gas phase concentrations of hydrogen chloride may not be negligible, and future measurement campaigns should include observations to test this hypothesis. Our ability to model aerosol behavior in Mexico City and, thus, design control strategies, is constrained primarily by a lack of observations of gas phase precursors. Future campaigns should focus in particular on better understanding the temporal and spatial distribution of ammonia concentrations. In addition, gas phase observations of nitric acid are needed, and a measure of particle water content will allow stable versus metastable aerosol behavior to be distinguished.     

Pesticide removal from waste spray-tank water by organoclay adsorption after field application: an approach for a formulation of cyprodinil containing antifoaming/defoaming agents

Purpose  

Many reports on purification of water containing pesticides are based on studies using unformulated active ingredients. However, most commercial formulations contain additives/adjuvants or are manufactured using microencapsulation which may influence the purification process. Therefore, the main objective of this work was to develop and test a pilot scheme for decontaminating water containing pesticides formulated with antifoaming/defoaming agents.     

Material and energy recovery in integrated waste management systems: the potential for energy recovery

This article is part of a set of six coordinated papers reporting the main findings of a research project carried out by five Italian universities on "Material and energy recovery in Integrated Waste Management Systems (IWMS)". An overview of the project and a summary of the most relevant results can be found in the introductory article of the series. This paper describes the work related to the evaluation of mass and energy balances, which has consisted of three major efforts (i) development of a model for quantifying the energy content and the elemental compositions of the waste streams appearing in a IWMS; (ii) upgrade of an earlier model to predict the performances of Waste-to-Energy (WtE) plants; (iii) evaluation of mass and energy balances of all the scenarios and the recovery paths considered in the project. Results show that not only the amount of material available for energy recovery is significantly higher than the Unsorted Residual Waste (URW) left after Separate Collection (SC), because selection and recycling generate significant amounts of residues, but its heating value is higher than that of the original, gross waste. Therefore, the energy potential of what is left after recycling is always higher than the complement to 100% of the Source Separation Level (SSL). Also, increasing SSL has marginal effects on the potential for energy recovery: nearly doubling SSL (from 35% to 65%) reduces the energy potential only by one fourth. Consequently, even at high SSL energy recovery is a fundamental step of a sustainable waste management system. Variations of SSL do bring about variations of the composition, heating value and moisture content of the material fed to WtE plants, but these variations (i) are smaller than one can expect; (ii) have marginal effects on the performances of the WtE plant. These considerations suggest that the mere value of SSL is not a good indicator of the quality of the waste management system, nor of its energy and environmental outcome. Given the well-known dependence of the efficiency of steam power plants with their power output, the efficiency of energy recovery crucially depends on the size of the IWMS served by the WtE plant. A fivefold increase of the amount of gross waste handled in the IWMS (from 150,000 to 750,000 tons per year of gross waste) allows increasing the electric efficiencies of the WtE plant by about 6-7 percentage points (from 21-23% to 28.5% circa).     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

A comparison of sediment quality guidelines for toxicity assessment in the Sunderban wetlands (Bay of Bengal, India)

The aim of this paper was to obtain the first screening ecotoxicological risk evaluation in the Sunderban wetlands, the largest prograding delta in the estuarine phase of the River Ganges. The characterization of exposure was conducted by means of an extensive survey of several persistent organic pollutants (PAHs, PCBs, DDTs, PBDEs, HCHs, HCB) measured in seven core sediments from the Sunderban wetlands, obtaining a dataset with more than 2200 analyses. The pollutant effects were assessed by the use of three different sediment quality guidelines (SQGs) previously developed in the literature to evaluate toxicity induced in sediment-dwelling organisms. The three different approaches chosen for risk assessment of the Sunderban were the consensus SQGs obtained by TEC (threshold effect concentration), PEC (probable effect concentration) and EEC (extreme effect concentration), the threshold/probable effect level (TEL/PEL) approach and, finally, the ERL-ERM guidelines, including the m-ERM-Q (mean ERM quotient). The evaluation of the toxicity induced by a mixture of the target pollutants indicated the importance of gamma-HCH contamination in the Sunderban sediments despite the very low concentrations measured in core sediments. A different sensitivity for toxicity assessment due to quality guidelines was obtained, as the consensus SQGs based on TEC were less conservative and protective than the TEL and ERL approaches, while the use of m-ERM-Q seems to be the most powerful tool to predict the toxicity related to a contaminant mixture.     

Diffusion of innovative agricultural production systems for sustainable development of small islands: A methodological approach based on the science of complexity

In order to develop small islands, not only must a vital agricultural system be maintained, but the range of opportunities for tourism must be increased with respect to both the seaside and the environmental features of the rural landscape. As an alternative to the traditional and economically declining ones, many innovative production processes can be identified, but their success depends on their interaction with the physical, biological, economic and social environment. In order to identify the main nodes and the most critical interactions, so as to increase the probability of success of a new productive process, a methodological approach based on the science of complexity is proposed for the cultivation of capers (Capparis spinosa L.) on the island of Pantelleria. The methodology encompasses the identification of actors and factors involved. the quantitative evaluation of their interactions with the different stages of the productive process, and a quasiquantitative evaluation of the probability that the particular action will be performed successfully. The study of “traditional,” “modernized,” and “modernized-sustainable” processes, shows that the modernized-sustainable process offers mutually reinforcing opportunities in terms of an integrated development of high-quality agricultural products and the enhancement of environmental features, in conjunction with high-efficiency production techniques, in conjunction with high-efficiency production techniques, in a way that suits the development of Pantelleria. There is a high probability of failure, however, as a result of the large number of critical factors. Nevertheless, the present study indicates which activities will enhance the probability of successful innovation in the production process.     

Greening of arid cities by residual water reuse: a multidisciplinary project in northern Chile

This paper describes a project in northern Chile aimed to promote the development of appropriate green areas and gardens for arid regions under prevalent conditions of shortage of water and high salt content in soil and water. Field studies were conducted to test the suitability of selected salt-tolerant native and introduced plants for ornamental use. Plant growth, water and soil quality, marine spray, climate, wastewater treatment and irrigation operating problems were the subject of specific studies and discussion.     

Translocation and persistence of EDU (ethylenediurea) in plants: the relationship with its role in ozone damage

Bean plants (Phaseolus vulgaris L. cv Lit) were treated with N-[2-(2-oxo-1-imidazolinidyl)ethyl]-N'-phenylurea (EDU) (150 microg ml(-1)) in hydroponic conditions. The EDU concentration in different plant tissues was measured by HPLC. EDU accumulated in leaves and persisted for more than 10 days showing a slow degradation. Using five different EDU concentrations, a significant relationship between EDU concentration in nutrient solution, ozone tolerance and EDU concentration in leaves was shown. Leaves which contained more EDU were less sensitive to ozone damage. Investigations on protoplasts and cell cultures showed that EDU did not enter the cells. Possible implications of EDU accumulation in the leaf apoplast are discussed.