Toxicity testing of pesticides in zebrafish—a systematic review on chemicals and associated toxicological endpoints

The use of zebrafish (Danio rerio) has arisen as a promising biological platform for toxicity testing of pesticides such as herbicides, insecticides, and fungicides. Therefore, it is relevant to assess the use of zebrafish in models of exposure to investigate the diversity of pesticide-associated toxicity endpoints which have been reported. Thus, this review aimed to assess the recent literature on the use of zebrafish in pesticide toxicity studies to capture data on the types of pesticide used, classes of pesticides, and zebrafish life stages associated with toxicity endpoints and phenotypic observations. A total of 352 articles published between September 2012 and May 2019 were curated. The results show an increased trend in the use of zebrafish for testing the toxicity of pesticides, with a great diversity of pesticides (203) and chemical classes (58) with different applications (41) being used. Furthermore, experimental outcomes could be clustered in 13 toxicity endpoints, mainly developmental toxicity, oxidative stress, and neurotoxicity. Organophosphorus, pyrethroid, azole, and triazine were the most studied classes of pesticides and associated with various toxicity endpoints. Studies frequently opted for early life stages (embryos and larvae). Although there is an evident lack of standardization of nomenclatures and phenotypic alterations, the information gathered here highlights associations between (classes of) pesticides and endpoints, which can be used to relate mechanisms of action specific to certain classes of chemicals.     

Determining the Feasibility of Establishing New Multiple-Use Marine Protected Areas in Chile

This paper evaluates the feasibility of establishing a multiple-use marine protected area. The methodology was applied to evaluate three proposed sites in Chile with diverse conservation needs, social stress and poverty levels, and different economic activities (small-scale fishing, heavy industry, and mining activities). We use two broad categories for the evaluation: socio-economic and political–institutional. The methodology uses a combination of secondary data with personal interviews, workshops, and focus groups with stakeholders (e.g., fishermen, unions, politicians, social organizations) from different political, social, and economic backgrounds to characterize current and potential natural and social resources and to evaluate in an ordinal scale the feasibility of establishing the protected area. The methodology allows us to correctly identify the challenges faced in each site and can be used to develop appropriate strategies for balancing economic, social, and environmental objectives. This methodology can be replicated to evaluate the feasibility of other marine or terrestrial protected areas.     

Leaching and degradation of S-Metolachlor in undisturbed soil cores amended with organic wastes

Environmental Science and Pollution Research - Organic waste (OW) reuse in agriculture is a common practice fostered by benefits in terms of waste recycling and crop production. However, OW...     

Coal cleaning residues and Fe-minerals implications

In the present investigation, a study was undertaken to understand the origin of Fe-minerals presents in Brazilian coal mining and to understand the environmental implication and the chemical heterogeneity in the study area. Coal cleaning residue samples rich in clays, quartz, sulphides, carbonates, sulphates, etc. were sampled from Lauro Muller, Urussanga, Treviso, Siderópolis, and Criciúma cities in the Santa Catarina State and a total of 19 samples were collected and Mössbauer, XRD, SEM/EDX, and TEM analyses were conducted on the samples. The major Fe-minerals identified are represented by the major minerals chlorite, hematite, illite, and pyrite, while the minor minerals include, ankerite, chalcopyrite, goethite, hematite, jarosite, maghemite, magnetie, marcasite, melanterite, natrojarosite, oligonite, pyrrhotite, rozenite, schwertmannite, siderite, and sideronatrile. Pyrite is relatively abundant in some cases, making up to around 10% of the mineral matter in several samples. The sulphates minerals such as jarosite and others, probably represent oxidation products of pyrite, developed during exposure or storage.     

Dioxin emissions from thermal waste management in Medellín, Colombia: present regulation status and preliminary results

Preliminary results of a study undertaken to characterize dioxin and furan releases from waste incineration plants operating in Medellín-Colombia are presented. Emission and fly ash samples were collected from representative plants burning medical and industrial residues to characterize PCDD/PCDF levels. Analyses were carried out following European standards for stationary gas emissions EN-1948:1996 and US EPA 1613 (fly ashes). Final extracts were analyzed by both high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC-HRMS) and high resolution gas chromatography coupled to ion trap tandem mass spectrometry (HRGC-ITMS/MS). Preliminary results revealed emission levels of 1-30.3 ng I-TEQ/Nm3 depending on whether or not an air pollution control system (APCS) was installed. Fly ashes contained 8.5-68 ng I-TEQ/g. Critical issues that should be addressed in an assessment and in developing waste management plans in Colombia are discussed.     

Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems

Pervious concrete is an alternative paving surface that can be used to reduce the nonpoint source pollution effects of stormwater runoff from paved surfaces such as roadways and parking lots by allowing some of the rainfall to permeate into the ground below. This infiltration rate may be adversely affected by clogging of the system, particularly clogging or covering by sand in coastal areas. A theoretical relation was developed between the effective permeability of a sand-clogged pervious concrete block, the permeability of sand, and the porosity of the unclogged block. Permeabilities were then measured for Portland cement pervious concrete systems fully covered with extra fine sand in a flume using simulated rainfalls. The experimental results correlated well with the theoretical calculated permeability of the pervious concrete system for pervious concrete systems fully covered on the surface with sand. Two different slopes (2% and 10%) were used. Rainfall rates were simulated for the combination of direct rainfall (passive runoff) and for additional stormwater runoff from adjacent areas (active runoff). A typical pervious concrete block will allow water to pass through at flow rates greater than 0.2 cm/s and a typical extra fine sand will have a permeability of approximately 0.02 cm/s. The limit of the system with complete sand coverage resulted in an effective system permeability of approximately 0.004 cm/s which is similar to the rainfall intensity of a 30 min duration, 100-year frequency event in the southeastern United States. The results obtained are important in designing and evaluating pervious concrete as a paving surface within watershed management systems for controlling the quantity of runoff.     

Cadmium and lead in bovine milk in the mining area of the Caudal River (Spain)

The levels of cadmium and lead in 36 raw bovine milk samples were analysed. These samples come from seven farms with a semi-extensive grazing system and were collected between the autumn of 2007 and the winter of 2008. All the farms were located in Asturias (Spain), a zone of great industrial and mining activity in the proximities of the Caudal River. The samples were collected in sterile precleaned polypropylene tubes and frozen until the analysis. After a lyophilization process, the samples were treated with nitric acid and microwave treatment. Cadmium and lead determinations were carried out using inductively coupled plasma mass spectrometry with sensibility under 0.2 ppb for liquid matrix. The lead content was found to vary from 0.71 to 16.06 μg/kg wet weight (w.w.), and the cadmium was lower than 2 μg/kg w.w. The levels of lead in milk are higher in those farms near zones of storage of mining waste depots, thermal power and areas with high levels of traffic. All the values found are in concordance with research carried out at non-polluted areas, and those for the lead are well below the European Union limitations.     

Nutrients and nonessential elements in soil after 11 years of wastewater irrigation

Irrigation of citrus (Citrus aurantium L. × Citrus paradise Macf.) with urban reclaimed wastewater (RWW) can be economical and conserve fresh water. However, concerns remain regarding its deleterious effects on soil quality. We investigated the ionic speciation (ISP) of RWW and potential impacts of 11 yr of irrigation with RWW on soil quality, compared with well-water (WW) irrigation. Most of nutrients (～53-99%) in RWW are free ionic species and readily available for plant uptake, such as: NH(4+), NO(3-), K(+), Ca(2+), Mg(2+), SO(4)(2-), H(3)BO(3), Cl(-), Fe(2+), Mn(2+), Zn(2+), Co(2+), and Ni(2+), whereas more than about 80% of Cu, Cr, Pb, and Al are complexed with CO(3-), OH(-), and/or organic matter. The RWW irrigation increased the availability and total concentrations of nutrients and nonessential elements, and soil salinity and sodicity by two to three times compared with WW-irrigated soils. Although RWW irrigation changed many soil parameters, no difference in citrus yield was observed. The risk of negative impacts from RWW irrigation on soil quality appears to be minimal because of: (i) adequate quality of RWW, according to USEPA limits; (ii) low concentrations of metals in soil after 11 yr of irrigation with RWW; and (iii) rapid leaching of salts in RWW-irrigated soil during the rainy season.     

Degradation of chlordecone and beta-hexachlorocyclohexane by photolysis, (photo-)fenton oxidation and ozonation

Intensive use of chlorinated pesticides from the 1960s to the 1990s has resulted in a diffuse contamination of soils and surface waters in the banana-producing areas of the French West Indies. The purpose of this research was, for the first time, to examine the degradation of two of these persistent pollutants – chlordecone (CLD) and beta-hexachlorocyclohexane (β-HCH) in 1 mg L^?1 synthetic aqueous solutions by means of photolysis, (photo-) Fenton oxidation and ozonation processes. Fenton oxidation is not efficient for CLD and yields less than 15% reduction of β-HCH concentration in 5 h. Conversely, both molecules can be quantitatively converted under UV-Vis irradiation reaching 100% of degradation in 5 h, while combination with hydrogen peroxide and ferrous iron does not show any significant improvement except in high wavelength range (>280 nm). Ozonation exhibits comparable but lower degradation rates than UV processes. Preliminary identification of degradation products indicated that hydrochlordecone was formed during photo-Fenton oxidation of CLD, while for β-HCH the major product peak exhibited C₃H₃Cl₂ as most abundant fragment.     

Normative barriers improvement through the MADS/MOSAR methodology

During the past 30 years, safety and environmental topics have moved up on the list of society’s significant concerns. Administrations and regulatory bodies have to publish rules for the protection of the public, decide whether to authorize the use of a chemical product or the construction of a new plant, limit the environmental impact, regulate waste disposal, etc. All these rules i.e. the legislative, normative and procedural corpus of a country, a state, a city or a factory can be designated to a barrier function. These barriers are indispensable and play an important role in industrial safety management. In developed countries, growth during the past few years in the number of laws directed at regulating environmental and safety aspects in industry is well known to everyone. Now the definition, classification and performance of the legislative and normative barriers definitely allow the management of technological risks. So it is possible to permit the identification of the flux of hazard and to perform risk reduction in order to enhance the acceptability in a regional context. A systemic risk analysis methodology was applied to Colombian industrial sectors. The current legislation was analyzed with three scenarios. A global panorama of the different existing instruments allowing future management opportunities was suggested. The obtained analysis results propose a point of view, which could be useful for a local government or a whole national system to evaluate or improve the risk legislative and normative barriers. This modeling can be applied to other countries and to other industrial sectors.