MINIMIZING THE IMPACT OF URBANIZATION ON LONG TERM RUNOFF1

Increasing concern about the problems caused by urban sprawl has encouraged development and implementation of smart growth approaches to land use management. One of the goals of smart growth is water resources protection, in particular minimizing the runoff impact of urbanization. To investigate the magnitude of the potential benefits of land use planning for water resources protection, possible runoff impacts of historical and projected urbanization were estimated for two watersheds in Indiana and Michigan using a long term hydrological impact analysis model. An optimization component allowed selection of land use change placements that minimize runoff increase. Optimizing land use change placement would have reduced runoff increase by as much as 4.9 percent from 1973 to 1997 in the Indiana study watershed. For nonsprawl and sprawl scenarios in the Michigan watershed for 1978 to 2040, optimizing land use change placement would have reduced runoff increase by 12.3 percent and 20.5 percent, respectively. The work presented here illustrates both an approach to assessing the magnitude of the impact of smart growth and the significant potential scale of smart growth in moderating runoff changes that result from urbanization. The results of this study have significant implications for urban planning.     

The Effect of Hydroxyl Radical Generation on Free-Radical Activation of TMP Fibers

The purpose of this work was to study the mechanisms involved in free radical activation of thermal mechanical pulp (TMP) fibers with the ultimate goal of developing methods for bonding wood fiber without the use of traditional adhesives. The generation of hydroxyl radicals in a mediated Fenton system was studied using electron spin resonance (ESR) spin-trapping techniques and indirectly through chemiluminescence measurement. The activation of TMP fibers was also evaluated by ESR measurement of free phenoxy radical generation on solid fibers. The results indicate that low molecular weight chelators can improve Fenton reactions, thus in turn stimulating the free radical activation of TMP fibers. However, it was also shown that excessive and prolonged free radical treatment may cause the destruction of fiber phenoxy radicals. In conclusion, this study demonstrates the potential for application, but also the complexity of free radical chemistry in biological materials, especially with regard to the chelation of transition metals and the interaction between free radicals.     

Migration of acidic groundwater seepage from uranium-tailings impoundments, 2. Geochemical behavior of radionuclides in groundwater

In this second paper of a series on groundwater seepage from uranium tailings, the general geochemical behavior of radionuclides is described and then applied to data from the field site, Seepage Area A of the Nordic Main impoundment near Elliot Lake, Ontario. The delineation of radionuclide behavior requires (1) the calculation of total element concentration by the summation of concentrations of each element's isotopes (the isotopic concentrations are calculated from the isotopes' radioactivities), (2) the evaluation of solid-liquid interactions using total element concentrations, and (3), for particular isotopes, the evaluation of the extent to which parental geochemical behavior causes a deviation in the isotope's behavior from that of its total element. A computerized speciation program, WATRAD, is used to evaluate aqueous complexation and mineral saturation indices of radium, actinium, thorium, and uranium. Data from Seepage Area A on isotopes of these four elements plus ²¹⁰Pb show that the geochemical behavior of radionuclides can be best defined on an individual isotopic basis rather than on an elemental basis.     

Process evaluation for optimization of EDTA use and recovery for heavy metal removal from a contaminated soil

This study aimed to establish an optimized, closed loop application of ethylenediaminetetraacetic acid (EDTA) in heavy metal removals from a contaminated soil through integrating EDTA recovery/regeneration and metal precipitation processes in the treatment train. Three divalent heavy metals were investigated, namely, Pb, Cd, and Ni. The extractability of the metals by EDTA followed the decreasing order of CdPb>Ni. The first part of this study was to search for the optimal use of the fresh EDTA in removing these heavy metals from the contaminated soil. The second part of this study was devoted to the recovery/regeneration of the spent EDTA which followed the sequential processes involving (1) complex destabilization by adding ferric ion (Fe(III)) to liberate Pb, Cd, and Ni, (2) precipitation of the liberated Pb, Cd, and Ni in phosphate (PO4(3-)) forms, and (3) precipitation of the excess Fe(III) which eventually produced free EDTA for reuse. The process variables were dosages of Fe(III) and PO4(3-), pH and reaction times. Laborious trial experiments would be needed in searching for the optimum conditions for the above processes. To expedite this exercise, a geochemical equilibrium model, MINTEQA2, was used to find the thermodynamically favorable conditions for recoveries of both EDTA and heavy metals. This was then followed by experimental examination of the process kinetics to observe for the optimal reaction time for each thermodynamically favorable process. This study revealed that 2 h of reaction time each for the complex destabilization reaction and the metal phosphate precipitation reaction was sufficient to achieve equilibrium. With the optimized process condition identified in this study, a total of 95%, 89% and 90% of the extracted Pb, Cd and Ni, respectively, could be precipitated from the spent EDTA solution, with 84% EDTA recovery. The reused EDTA maintained more than 90% of its preceding extraction power in each cycle of reuse.     

Reductive dechlorination of 1,2,4-trichlorobenzene with palladized nanoscale Fe(zero-valent) particles supported on chitosan and silica

In this study, nanoscale Pd-Fe particles, with diameters less than 100 nm, were synthesized and dispersed over the chitosan and silica supports. Three different Pd-Fe particles were synthesized, namely 0.1% Pd-Fe, 0.5% Pd-Fe and 1.0% Pd-Fe. SEM images confirmed that the Pd-Fe particles were dispersed over the surface of the supports while SEM-EDX confirmed evenly distribution of Pd over Fe(zero-valent). alpha-Fe(zero-valent) crystallites were identified by means of XRD and observed in TEM. Reductive dechlorinations of 1,2,4-trichlorobenzene (1,2,4-TCB) with the nanoscale Pd-Fe/chitosan and Pd-Fe/silica were carried out in the batch experiment system. Disappearance of the parent species and formation of the reaction intermediates and end product were monitored at discrete times. The results show that the nano-scale Pd-Fe particles were able to completely dechlorinate the chlorinated benzenes within a very short timescale. Complete dechlorinations of 1,2,4-TCB to benzene were achieved within 60 min with the 1.0% Pd-Fe/chitosan and within 100 min with the 1.0% Pd-Fe/silica. Reaction rates were observed to increase with increasing Pd content of the Pd-Fe/support. The reactions apparently followed pseudo-first-order kinetics with respect to the 1,2,4-TCB transformation. A kinetic model is constructed to fit the experimental results for the reactions, enabling identification of the major and minor dechlorination pathways of 1,2,4-TCB. The model suggests that the 1,2,4-TCB transformation mainly followed the primary pathway of direct reductive dechlorination to benzene and secondary pathway of sequential hydrogenolysis to 1,2-dichlorobenzene (1,2-DCB) and then chlorobenzene (CB) or benzene.     

Quality assured measurements of animal building emissions: gas concentrations

Comprehensive field studies were initiated in 2002 to measure emissions of ammonia (NH3), hydrogen sulfide (H2S), carbon dioxide (CO2), methane (CH4), nonmethane hydrocarbons (NMHC), particulate matter <10 microm in diameter, and total suspended particulate from swine and poultry production buildings in the United States. This paper focuses on the quasicontinuous gas concentration measurement at multiple locations among paired barns in seven states. Documented principles, used in air pollution monitoring at industrial sources, were applied in developing quality assurance (QA) project plans for these studies. Air was sampled from multiple locations with each gas analyzed with one high quality commercial gas analyzer that was located in an environmentally controlled on-farm instrument shelter. A nominal 4 L/min gas sampling system was designed and constructed with Teflon wetted surfaces, bypass pumping, and sample line flow and pressure sensors. Three-way solenoids were used to automatically switch between multiple gas sampling lines with > or =10 min sampling intervals. Inside and outside gas sampling probes were between 10 and 115 m away from the analyzers. Analyzers used chemiluminescence, fluorescence, photoacoustic infrared, and photoionization detectors for NH3, H2S, CO2, CH4, and NMHC, respectively. Data were collected using personal computer-based data acquisition hardware and software. This paper discusses the methodology of gas concentration measurements and the unique challenges that livestock barns pose for achieving desired accuracy and precision, data representativeness, comparability and completeness, and instrument calibration and maintenance.