Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

Photodegradation of tetraphenyltin contained in polychlorinated biphenyl-based transformer oil simulants in alkaline 2-propanol solution

The photodegradation of tetraphenyltin (TePT) contained in polychlorinated biphenyl (PCB)-based transformer oil simulants by ultraviolet (UV) irradiation in alkaline 2-propanol solutions was examined. In the absence of PCBs, the TePT level fell to below 1% of the initial concentration within 30 min. In the absence of both PCBs and an alkali, the concentrations of tri-, di-, and monophenyltins initially increased to a few milligrams per liter, and then reduced to below the detection limits within 90 min. The addition of an alkali to the reaction solution slightly accelerated the photodecomposition of TePT. The decomposition of other phenyltins (PTs) was also accelerated. When PCBs with concentrations of approximately 80 times the initial TePT concentration were added, only a small fraction of the TePT decomposed within 100 min. Moreover, the levels of PTs did not change during irradiation. TePT and other PTs did decompose when the level of PCBs was reduced to the same concentration as that of TePT; however, the decomposition rates were slower than those in the absence of PCBs. In the actual treatment process, TePT and other PTs in PCB-based transformer oil are decomposed by catalytic reduction, which is used after UV irradiation. Therefore, in the actual treatment of PCB-based transformer oil wastes, pollution due to PTs can be prevented.     

SEISMIC REFRACTION ANALYSIS OF WATERSHED MANTLE RELATED TO SOIL,GEOLOGY AND HYDROLOGY1

ABSTRACT: An extensive hammer seismic refraction survey was carried out in three contiguous watersheds (217, 89, and 190 acres) on a laccolith near Sturgis, South Dakota to test its utility in rugged mountain terrain. Isopachs (lines connecting points of equal mantle thickness), area-elevation curves (hypsometry), and structure contours were used together with drill cores, petrography, hydrographs, and soil information to interpret the nature and role of porous mantle in the waterflow behavior of the watersheds. Refraction profiles produced only one geologically meaningful seismic contrast within the loccolith. Drill cores indicated a shallow stony profile on a sheeted horizon terminating on isotropic crystalline rock impervious except for tight joints. Means of refraction and core interpretations were not statistically different. Apparent seismic discontinuities deeper within the bedrock lacked geological identity. Storm hydrographs and water yields are better related to soil type differences and porous mantle distribution than to average porous mantle depth. On the other hand, slope of flow-duration curves correlate with average porous mantle depth. Porous mantle isopachs also indicate that measured flow from each basin is total area flow. Thus, porous mantle isopachs and hypsometry, and soil type delineation are complimentary in our interpretation of watershed behavior.     

Assessment of heavy metals in the particulate matter of two Brazilian metropolitan areas by using <Emphasis Type="BoldItalic">Tillandsia usneoides</Emphasis> as atmospheric biomonitor

Purpose  

The aims of this paper were to quantify the heavy metals (HM) in the air of different sites in Rio de Janeiro (RJ) and Salvador (SA) using Tillandsia usneoides (Bromeliaceae) as a biomonitor, and to study the morphology and elemental composition of the air particulate matter (PM) retained on the Tillandsia surface.