Hydrocarbon emissions speciation in diesel and biodiesel exhausts

Diesel engine emissions are composed of a long list of organic compounds, ranging from C₂ to C₁₂₊, and coming from the hydrocarbons partially oxidized in combustion or produced by pyrolisis. Many of these are considered as ozone precursors in the atmosphere, since they can interact with nitrogen oxides to produce ozone under atmospheric conditions in the presence of sunlight. In addition to problematic ozone production, Brookes, P., and Duncan, M. [1971. Carcinogenic hydrocarbons and human cells in culture. Nature.] and Heywood, J. [1988. Internal Combustion Engine Fundamentals.Mc Graw-Hill, ISBN 0-07-1000499-8.] determined that the polycyclic aromatic hydrocarbons present in exhaust gases are dangerous to human health, being highly carcinogenic.The aim of this study was to identify by means of gas chromatography the amount of each hydrocarbon species present in the exhaust gases of diesel engines operating with different biodiesel blends. The levels of reactive and non-reactive hydrocarbons present in diesel engine exhaust gases powered by different biodiesel fuel blends were also analyzed.Detailed speciation revealed a drastic change in the nature and quantity of semi-volatile compounds when biodiesel fuels are employed, the most affected being the aromatic compounds. Both aromatic and oxygenated aromatic compounds were found in biodiesel exhaust. Finally, the conservation of species for off-side analysis and the possible influence of engine operating conditions on the chemical characterization of the semi-volatile compound phase are discussed.The use of oxygenated fuel blends shows a reduction in the Engine-Out emissions of total hydrocarbons. But the potential of the hydrocarbon emissions is more dependent on the compositions of these hydrocarbons in the Engine-Out, to the quantity; a large percent of hydrocarbons existing in the exhaust, when biodiesel blends are used, are partially burned hydrocarbons, and are interesting as they have the maximum reactivity, but with the use of pure biodiesel and diesel, the most hydrocarbons are from unburned fuel and they have a less reactivity. The best composition in the fuel, for the control of the hydrocarbon emissions reactivity, needs to be a fuel with high-saturated fatty acid content.     

ARCGIS‐SWAT: A GEODATA MODEL AND GIS INTERFACE FOR SWAT1

This paper presents ArcGIS‐SWAT, a geodata model and geographic information system (GIS) interface for the Soil and Water Assessment Tool (SWAT). The ArcGIS‐SWAT data model is a system of geodatabases that store SWAT geographic, numeric, and text input data and results in an organized fashion. Thus, it is proposed that a single and comprehensive geodatabase be used as the repository of a SWAT simulation. The ArcGIS‐SWAT interface uses programming objects that conform to the Component Object Model (COM) design standard, which facilitate the use of functionality of other Windows‐based applications within ArcGIS‐SWAT. In particular, the use of MS Excel and MATLAB functionality for data analysis and visualization of results is demonstrated. Likewise, it is proposed to conduct hydrologic model integration through the sharing of information with a not‐model‐specific hub data model where information common to different models can be stored and from which it can be retrieved. As an example, it is demonstrated how the Hydrologic Modeling System (HMS) ‐ a computer application for flood analysis ‐ can use information originally developed by ArcGIS‐SWAT for SWAT. The application of ArcGIS‐SWAT to the Seco Creek watershed in Texas is presented.     

Chromium (III) recovery from waste acid solution by ion exchange processing using Amberlite IR-120 resin: batch and continuous ion exchange modelling

The use of ion exchange technology was studied to remove chromium (III) from acidic waste solution by Amberlite IR-120 resin. Batch and column experimental tests were conducted to provide data for theoretical models and verify the system performance of the adsorption process. Results of batch equilibrium tests indicated that Langmuir isotherm describes well the adsorption process, whereas experimental data also provide evidence that, under the present experimental conditions, chromium (III) adsorption by Amberlite IR-120 resin is film-diffusion controlled; on the other hand, the theoretical model used in the present investigation was found to predict reasonably well the ion exchange breakthrough performance.     

Electrostatic Precipitation of Ultrafine Particles Enhanced by Simultaneous Diffusional Deposition on Wire Screens

Abstract

A laboratory-scale electrostatic precipitator has been designed and constructed in which the grounded collector plate has been substituted by a set of wire screens placed perpendicularly to the gas flow. Particles are deposited onto the screens by two mechanisms—electrostatic deposition and diffusional deposition—which act simultaneously. On the one hand, electrostatic deposition is effective for relatively large particles, but it is quite ineffective for the smallest ones because their charging probability in the corona field is too low. On the other hand, the diffusional collection efficiency of particles on fibers is high for small particles but low for the larger ones. Therefore, the simultaneous diffusional-electrostatic precipitation may become a useful technique for efficient filtration of particles below 0.1 μm. A preliminary experimental evaluation of this filtering device has shown that submicrometer particles with diameters down to a few nanometers can be collected with number efficiencies greater than 99%.     

Molecular and physiological approaches to understand the ecology of methanol degradation during the biofiltration of air streams

A 13.4 L biofilter treating an off-gas stream supplemented with methanol under two different situations was studied in terms of MeOH removal efficiency, microbial ecology and odor removal. During Period 1 (P1) the reactor was packed with wood bark chips with no pH control, treating an off-gas resulting from the aerobic chamber of a membrane biological reactor treating sewage and located outdoor, whereas during Period 2 (P2) a compressed air stream fed with MeOH was treated using PVC rings and maintaining pH at neutral values. Both systems operated at 96 g MeOH m⁻³ h⁻¹ achieving removal efficiencies of around 90% during P1 and 99.9% during P2. The relative activity of biomass developed in both systems was assessed using respirometric analysis with samples obtained from both biofilms. Higher biomass activity was obtained during P2 (0.25-0.35 kg MeOH kg⁻¹ VSS d⁻¹) whereas 1.1 kg MeOH kg⁻¹ VSS d⁻¹ was obtained in the case of P1. The application of molecular and microscopic techniques showed that the eukaryotes were predominant during P1, being the yeast Candida boidinii the most abundant microorganism. A specific Fluorescence in situ hybridization probe was designed for C. boidinii and tested successfully. As a result of the neutral pH, a clear predominance of prokaryotes was detected during P2. Interestingly, some anaerobic bacteria were detected such as Desulfovibrio, Desulfobacteraceae species and also some archaea such as Methanosarcina.     

Shifts in Microbial Communities, Microbial Biomass and Organic Matter Mineralization for Three Mediterranean Soils Contaminated By Metals

Microbial communities (phospholipid fatty acid pattern, bacterial growing strategies, eco-physiological index (EPI) and total bacteria counts, as a number of heterotrophic cuhurable bacteria), substrate-induced respiration (SIR), and nitrogen mineralization were studied in three Mediterranean soils at three different depth levels (A, B and C). Soils were experimentally treated with a final concentration of 1000 ppm of trace metals (Cu²⁺, Zn²⁺, Al³⁺, Fe²⁺, Pb²⁺, Ni²⁺, Mn²⁺, Cr³⁺ and Cd²⁺). Soils were stored in 571 plastic containers for one year, and watered with 1001 during this period. Leachate was recovered through a bottom tap. Samples of the three depths were studied. Soil microbial communities showed different effects to other studies presented in the literature, but carried out on non-Mediterranean soils. Dramatic differences were found between treated soils and untreated ones, but not between soils or horizons. the treated soil displayed a decrease in CFUs, SIR N-mineralization and EPI together with a dominance of r-growing strategists. the relative moles percent of several PLFAs, especially 15:0, 16: 1ω7, cy17: 0, br18:0 and 18: 1ω7 decreased because of the pollution of soils, whereas 10Me16, 18:2ω6, cy19:0, i16:0 and br17:0 showed higher values than in untreated soils.     

Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: sustainability and risks

We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil.     

Integrating Landscape Analysis and Planning: A Multi-Scale Approach for Oriented Management of Tourist Recreation

Tourism and landscape are interdependent concepts. Nature- and culture-based tourism are now quite well developed activities and can constitute an excellent way of exploiting the natural resources of certain areas, and should therefore be considered as key objectives in landscape planning and management in a growing number of countries. All of this calls for careful evaluation of the effects of tourism on the territory. This article focuses on an integrated spatial method for landscape analysis aimed at quantifying the relationship between preferences of visitors and landscape features. The spatial expression of the model relating types of leisure and recreational preferences to the potential capacity of the landscape to meet them involves a set of maps showing degrees of potential visitor satisfaction. The method constitutes a useful tool for the design of tourism planning and management strategies, with landscape conservation as a reference.