Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

保定市大气污染特征和潜在输送源分析

保定市是京津冀地区重要城市之一.为了解保定市大气污染物质量浓度特征和潜在输送源,对保定市国控点2017年1月1日-12月31日PM₁₀、PM_2.5、SO₂、NO₂、O₃、CO等常规大气污染物数据进行分析,并利用TrajStat后向轨迹模型进行区域传输研究.结果表明:①ρ（PM₁₀）、ρ（PM_2.5）、ρ（SO₂）、ρ（NO₂）分别为（138±96）（84±66）（29±23）和（50±24）μg/m3,与2016年相比分别下降5.9%、9.1%、25.5%和13.1%;ρ（CO）较2016年下降了14.0%;ρ（O₃）较2016年增长了25.2%.ρ（PM₁₀）、ρ（PM_2.5）、ρ（NO₂）和ρ（O₃）分别超过GB 3095-2012《环境空气质量标准》二级标准限值的0.97、1.40、0.25和0.34倍,ρ（SO₂）和ρ（CO）未超标.②除ρ（O₃）外,其他污染物质量浓度均呈冬季最高、夏季最低的季节性特征,其中,冬季PM_2.5污染最为严重,春季PM_2.5~10（粗颗粒物）污染严重.③空气质量模型源解析结果显示,保定市ρ（PM_2.5）约60.0%~70.0%来自本地污染源排放.后向轨迹结果表明,在外来区域传输影响中,保定市主要受到西北方向气团（占比为21.7%~60.0%）远距离传输和正南方向气团（占比为34.8%~50.5%）近距离传输的影响.④PSCF（潜在源贡献因子分析法）和CWT（浓度权重轨迹分析法）分析表明,除保定市及周边区县本地污染贡献外,位于太行山东麓沿线西南传输通道的邯郸市、邢台市、石家庄市是影响保定市PM_2.5的主要潜在源区.研究显示,PM_2.5为保定市大气中的主要污染物,并呈冬季高、夏季低的变化特征,其主要来自西北远距离输送和南部近距离传输.      

基于底栖动物的松花江流域不同地形分区水质指标阈值研究

为全面了解松花江流域不同地形分区内底栖动物群落对水质指标的响应规律,识别不同分区水质指标指示物种的差异,于2016—2018年对松花江流域97个采样点的水质指标〔EC、ρ（DO）、ρ（COD_Mn）、ρ（NH₃-N）、ρ（TN）、ρ（TP）〕和大型底栖动物群落进行调查分析,采用临界指示物种分析法（threshold indicator taxa analysis,TITAN）分别探讨松花江流域山区、丘陵区和平原区水质指标的生态阈值,当污染物浓度超过负响应阈值时敏感种密度降低,当超过正响应阈值时耐受种也会受到明显影响,底栖动物群落结构会发生显著变化.将TITAN法所得的负响应阈值作为触发底栖动物群落发生变化的最低值,正响应阈值为底栖动物群落的耐受极限值.结果表明:①松花江流域水质指标在不同地形分区内的阈值不同,除ρ（DO）和ρ（COD_Mn）外,其他指标负响应阈值均表现为山区 < 丘陵区 < 平原区,ρ（DO）则表现相反,ρ（COD_Mn）在丘陵区出现最高阈值（5.46 mg/L）、山区出现最低阈值（4.01 mg/L）.除ρ（DO）以外,其他指标的正响应阈值均呈山区 < 丘陵区 < 平原区的趋势,ρ（DO）正响应阈值的变化趋势则与之相反.②松花江流域内超过50%的采样点水质指标值均超过其负响应阈值,超出正响应阈值的采样点比例在6%~40%之间,说明流域受到一定的干扰,但干扰程度不严重.③同一物种在不同地形分区内对水体理化指标的指示方向可能相反.萝卜螺属在丘陵区为ρ（NH₃-N）的正响应指示物种,在平原区则转变为负响应指示物种;短沟蜷属在丘陵区为ρ（TN）和ρ（TP）的正响应物种,在平原区则转变为负响应物种.研究显示,大型底栖动物群落结构的分布特征是影响水质指标阈值指示物种识别的主要原因,而不同分区的自然地理状况、栖境状况和水质状况则是造成大型底栖动物群落结构分布差异的主要因素.      

纳米零价铁的制备技术及其应用研究进展

纳米零价铁（nZVI）因具有还原性强、粒径小、比表面积大等特性,对重金属及含卤有机污染物等具有良好的吸附特性和反应活性,在环境修复方面表现出较好的应用前景。但nZVI易氧化、团聚和机械强度低等不利因素限制了其大规模应用。系统比较了机械法、气体冷凝法及还原法制备nZVI技术的特点,重点总结表面改性、金属改性、载体负载和基质封装等手段制备改性nZVI的研究进展,及其在水体及土壤环境修复方面的应用。     

乡村振兴视域下农村土地利用利益相关者分析

乡村振兴的实施使得农村土地利用与管理面临更多的挑战。应用利益相关者分析、博弈均衡分析和实证案例分析,探讨乡村振兴视域下土地利用各利益相关者的关系演变。研究结果显示：（1）1949年至今,农村地区土地利用利益相关者主体数量增加,博弈关系呈现复杂化、多样化和多向化;（2）乡村振兴时期主要有六种博弈关系,并探讨了案例村实施下山脱贫、发展乡村旅游、新型经营主体进驻、城市居民促进农村发展四种博弈决策过程;（3）乡村振兴视域下,农村地区发展应关注基础设施配套、土地利用效率与生态环境协调、农户生计可持续性等问题。乡村振兴中应注重实现土地利用各利益相关者的最优均衡,降低各方风险,保护生态环境并寻求多方利益平衡。     

水动力对沉积物-水界面氧通量产生机制的影响

选取三峡库区支流御临河为研究对象,测量了5个水动力条件（平均流速为0.00,0.03,0.07,0.12,0.20m/s）下沉积物-水界面（SWI）氧通量的变化及水动力条件对SWI氧通量产生机制的影响.结果表明,随着平均流速的升高,SWI氧通量增加,由0.00m/s时的1.197mmol/（m²·h）增加为0.20m/s时的43.981mmol/（m²·h）,溶解氧穿透深度增加,氧进入沉积物更深处并被微生物和还原性物质所利用,沉积物耗氧量上升;当平均流速较低时,沉积物耗氧量以生物耗氧量为主,在0.00m/s与0.03m/s时生物耗氧量为氧通量的85.3%与57.7%;当水体平均流速较高,化学耗氧量与其他耗氧量中的化学过程耗氧量在氧通量中的比重逐步提高.     

废旧阴极-赤泥协同处理烧结熟料的溶出性能

采用XRF,ICP-MS,XRD及SEM-EDS检测手段,研究了废旧阴极-赤泥高温协同处理所得熟料的溶出性能.结果表明,Na₂CO₃浓度,温度,时间及液固比因素对Al₂O₃,Na₂O溶出率TFe₂O₃的富集效果的影响趋势一致.最适宜溶出条件为：Na₂CO₃ 30g/L,温度50℃,时间30min,液固比8.该条件下,熟料中Al₂O₃和Na₂O溶出率分别高达为87.41%和92.51%;相应的SiO₂和CaO溶出率仅为3.02%和0.36%,铁矿物几乎不溶.溶出渣中的TFe₂O₃含量从熟料中23.64%提高到39.89%,研究表明溶出工艺同步实现了熟料中铝、钠的回收和铁的富集.再者,处理后溶出渣较熟料减量近16%（以铝和钠溶出率测算）,且属于非危险性废物.     

组配改良剂联合硅肥对Cd污染稻田的修复效果

选取湖南省浏阳市某Cd污染稻田进行田间试验,研究组配改良剂石灰石+海泡石（LS）、基施硅肥及叶面喷施硅肥对Cd污染稻田修复效果,结果表明：（1）基施硅肥90kg/hm²和叶面喷施硅肥（0.2,0.4g/L）对土壤pH值无明显影响,添加LS（2250,4500kg/hm²）的各处理均显著提高土壤pH值（P < 0.05）.（2）基施硅肥90kg/hm²分别降低土壤交换态、毒性特征浸出（TCLP）提取态Cd含量20.0%和18.5%,叶面喷施硅肥对土壤Cd两种提取态含量无明显影响,添加LS的各处理（2250,4500kg/hm²）分别使土壤交换态、TCLP提取态Cd含量降低25.8%~49.9%、26.4%~44.5%.（3）3种单一技术措施均能明显降低水稻各部位Cd含量,但降低糙米中Cd含量的效果低于3种技术措施的组合处理;“组配改良剂LS+基施硅肥+叶面喷施硅肥”各处理（JL1F1、JL1F2、JL2F1、JL2F2）使水稻糙米中Cd含量降低25.6%~70.5%.（4）“组配改良剂LS+基施硅肥+叶面喷施硅肥”的组合技术处理能显著降低土壤中Cd的有效性,显著降低水稻各部位中Cd含量,其中JL2F2处理效果最佳,能使对照糙米Cd含量从0.66mg/kg降低到0.19mg/kg,实现中重度Cd污染稻田的水稻安全生产.