A novel state-of-charge-based method for plug-in hybrid vehicle electric distance analysis validated with actual driving data

Mitigation and Adaptation Strategies for Global Change - Promoting Plug-In Hybrid Vehicles (PHEVs) is viewed as a promising strategy to mitigate the energy consumption and greenhouse gas...     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

含弹内埋弹舱缩尺模型气动噪声特性研究

目的对含弹的内埋弹舱模型进行噪声仿真和试验研究。方法计算采用"CFD+CAA"的混合方法,采用DDES计算流场,基于M?hring声学类比方法得到测量点的噪声信息。采用该方法与空腔M219标准试验结果进行对比。内埋弹舱吹风试验在全消声室中进行,并采用传声器阵列识别主要噪声源。结果计算与试验得到的不同来流条件下,不同测量点的噪声频谱曲线基本一致。弹舱内最大声压级出现在中间弹翼附近的侧壁上,与声源识别的主要噪声源的位置一致。结论该研究可为内埋弹舱的设计提供参考和技术支持。     

感潮河段污水处理厂尾水对受纳水体的水质影响研究

感潮河段污水处理厂尾水排放对受纳水体产生一定影响,利用二维水动力水质耦合模型,以COD、NH3-N、TP为污染因子,分别以正常排放和事故排放两种条件,模拟江苏南部某污水处理厂尾水排放,分析江段大小潮时污染物浓度增量情况。实验结果表明:正常排放,尾水对排放口附近江段保护区水质影响小;事故排放,尾水对保护区水质无影响,但长江水体影响范围增大,沿岸污染物浓度增高,且小潮周期影响作用强于大潮周期,污水处理厂应加强管理,尤其在小潮时应避免污水事故排放。     

不同区域城市空气O3和PM2.5累积速率时序模型

利用2017—2018年全国7个区域10个典型城市环境空气O₃和PM_2.5浓度数据，统计污染物累积速率，进而采用回归方法拟合污染物浓度及其累积速率的时间序列模型，分析不同区域污染物时序变化特征差异。结果表明：不同区域O₃浓度时序曲线拟合程度总体高于PM_2.5，石家庄O₃拟合程度最高，西安PM_2.5拟合程度最高。以07：00、14：00分别作为O₃、PM_2.5模拟起点是24 h中的最优模型。不同城市夏季O₃小时浓度时序变化曲线均为单峰形态，O₃浓度及累积速率峰值出现时间可能由城市所处经度决定，太原O₃累积最快，西安O₃消解最快。各城市间冬季PM_2.5小时浓度及其累积速率时序变化曲线形态差异较大，沈阳PM_2.5累积和消解均最快。与浓度相比，城市环境空气O₃和PM_2.5累积速率与光照、扩散条件等有更好的时间相关性。     

天青石及锶矿中硫酸锶的测定

通过实验，解决了测定天青石中硫酸锶时的不足，结果令人满意。     

用灰色关联度方法进行水污染因子分析

介绍了灰色关联度因子分析方法,以及此法在水污染因子分析中的应用.对于一般监测资料系列短而监测项目却较齐全的情况,应用本法是较适宜的.