Does environmental engineering help rural industry development? Discussion on the impact of Taiwan’s “special act for forward-looking infrastructure” on rural industry development

Environmental Science and Pollution Research - This study investigated the impact of environmental engineering on existing venues, venues and operations management. First, the literature analysis...     

Lack of mtDNA and morphological differentiation between two acorn barnacles <Emphasis Type="Italic">Tetraclita japonica</Emphasis> and <Emphasis Type="Italic">T. formosana</Emphasis> differing in parietes colours and geographical distribution

Tetraclita japonica and T. formosana are common intertidal barnacles with similar morphology, which leads to uncertainty in their species status. In the present study, we try to elucidate the taxonomic status of the two taxa using morphology and mitochondrial control region and cytochrome c oxidase subunit I (COI) sequences of the barnacles in their distribution range. The two taxa were found to be morphologically similar; a diagnostic difference between them was only observed in the colour of the parietes and opercular plates. Little genetic differentiation was detected in the control region and COI (Φ_CT < 0.025 for both markers) between two taxa, but differentiation was found between the southern (Taiwan and Hong Kong) and northern (Japan) populations of T. japonica/T. formosana, which might be the result of isolation by distance and upwelling in summer. Our data suggest that the two presently recognized species probably represent two colour morphotypes of the same species exhibiting different geographical distribution. T. japonica is abundant in Japan and southeast coast of China, whereas T. formosana is only abundant in Taiwan. The heterogeneous environment might exert a divergent selection pressure leading to asymmetric distribution of the two colour morphotypes. The different colours might be a result of either phenotypic plasticity adaptive to environmental variables or genetic hitchhiking of local adaptive genotypes. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

A mathematical model for predicting the flash point of binary solutions

A mathematical model which may be used for predicting the flash point of binary solutions has been proposed and subsequently verified by experimentally-derived data, such data pertaining to an almost-ideal solution as also to highly non-ideal solutions. The results reveal that the model is able to precisely predict the flash point over the entire composition range of binary solutions for both ideal solutions and non-ideal solutions by way of utilizing the flash point of the individual components. The highly non-ideal solution like octane+ethanol exhibits the minimum flash-point behavior, which leads to the minimum on the flash point vs composition curve.     

Metal Concentration in Oyster,Crassostrea Gigas,and Sediment in Ann-Ping Mariculture Ground,Taiwan

Abstract

This study was to assess the metal contamination in oyster tissue grown in the Ann-ping mariculture ground in Taiwan. the information generated from this work also revealed general metal pollution problem for Taiwan's oyster farmers. Oysters, Crassostrea gigas, and surficial sediments collected from ten locations in Ann-ping mariculture ground in Taiwan for metals concentration (Cu, Zn, Pd, Cd, Fe and Mn) were performed. Analytical results indicated that the yearly averaged oyster copper concentrations (μg g^?1, wet weight) in oyster soft parts from Ann-ping increased from 21.3±4.1 in 1993; 24.1±6.8 in 1994; 36.8±11.9 in 1995 to 43.9±23.1 μg g^?1, wet weight, in the 1996 raising season. the mean oyster copper concentration reached a level of 50 μg g^?1, wet weight, in December 1996. This increasing trend of metal concentration in oyster tissue indicates a potential pollution source which may pose a potential disaster as green oyster incidence, which occurred on the Charting coast in 1986, in Taiwan. Sediment samples in Ann-ping mariculture ground were also collected and examined. the seasonal variation of the copper concentration in surficial sediment from Ann-ping did not show an increasing trend as observed in oyster tissue.     

Transport and fate of organic wastes in groundwater at the Stringfellow hazardous waste disposal site, southern California

In January 1999, wastewater influent and effluent from the pretreatment plant at the Stringfellow hazardous waste disposal site were sampled along with groundwater at six locations along the groundwater contaminant plume. The objectives of this sampling and study were to identify at the compound class level the unidentified 40-60% of wastewater organic contaminants, and to determine what organic compound classes were being removed by the wastewater pretreatment plant, and what organic compound classes persisted during subsurface waste migration. The unidentified organic wastes are primarily chlorinated aromatic sulfonic acids derived from wastes from DDT manufacture. Trace amounts of EDTA and NTA organic complexing agents were discovered along with carboxylate metabolites of the common alkylphenolpolyethoxylate plasticizers and nonionic surfactants. The wastewater pretreatment plant removed most of the aromatic chlorinated sulfonic acids that have hydrophobic neutral properties, but the p-chlorobenzene-sulfonic acid which is the primary waste constituent passed through the pretreatment plant and was discharged in the treated wastewaters transported to an industrial sewer. During migration in groundwater, p-chlorobenzenesulfonic acid is removed by natural remediation processes. Wastewater organic contaminants have decreased 3- to 45-fold in the groundwater from 1985 to 1999 as a result of site remediation and natural remediation processes. The chlorinated aromatic sulfonic acids with hydrophobic neutral properties persist and have migrated into groundwater that underlies the adjacent residential community.     

Assessing pollution prevention program by QUAL2E simulation analysis for the Kao-Ping River Basin, Taiwan

Wise and sustainable uses of water resources are essential for an effective river-basin-management planning. Recent management strategy further addresses the fact that quantity and quality of water are closely interrelated, and both must be considered simultaneously for all water resources and water quality management practices. The aim of this paper is to explore the impacts of water resources redistribution and pollution prevention actions between and within river basins simultaneously in South Taiwan. Much emphasis will be placed on assessing the impacts of water transfer over natural boundary to satisfy the needs of industrial development in the Tseng-Wen River system and its resultant influence on the water quality in the downstream area of the Kao-Ping River system where the pollution prevention program is to be implemented. The Kao-Ping River was further characterized hydraulically and environmentally, based on a full investigation of discharges and withdrawals in the river reaches. QUAL2E was successfully calibrated and validated using data collected between 1998 and 1999, and the model was capable of predicting the concentrations of biochemical oxygen demand, dissolved oxygen, total phosphate-phosphorus, and ammonia-nitrogen (NH3-N) for the entire river system. With the aid of QUAL2E simulation model, it shows eliminating the pig farming activities and constructing the sewer systems in the upstream area of Kao-Ping River cannot guarantee the full compliance with water quality standards in the downstream area and water transfer in the upstream area further increases negative impacts on the water quality in the wet season. The predicted situation of water quality in the dry season may even present worse condition. Additional water pollution control policy, such as the use of economic instruments, for controlling and reducing the waste-load of biochemical oxygen demand and ammonia-nitrogen is needed in the Kao-Ping River system in the long run.     

APPLICATION OF THE GENETIC ALGORITHM FOR OPTIMIZING OPERATION RULES OF THE LiYuTan RESERVOIR IN TAIWAN1

ABSTRACT: A procedure to apply genetic algorithm to optimize operation rules is proposed and applied to the LiYuTan Reservoir in Taiwan. The designed operation rules are operation zones with discount rates of water supply. The first step of the procedure is to predefine the shape of boundary curves of operation zones according to reservoir storage routing. Then, relatively fewer variables are used to describe the curves, and a last genetic algorithm (GA) is applied to optimize the curves. The procedure is applied to the newly built LiYuTan Reservoir for increasing domestic water demands. Shortage index is used to evaluate the performance of operation zones. A year is divided into 36 operational periods, with each month containing three operational periods. The shortage indexes calculated in operational periods are 9.81, 8.27, and 7.13, respectively, for the reservoir without operation rules, applying operation zones optimized by GA with encoding 36 storage levels for each curve, and adopting operation zones optimized by GA with encoding the curves with predefined shape. The average deficits for the three cases are 77.2, 43.6, and 33.3 (10⁴ m³/day), respectively. The results indicate that operation zones optimized by the proposed procedure have smaller shortage indexes and lower average deficits. In addition, the optimized operation zones have less variation and thus are more practical for operation. Conclusively, the proposed procedure utilizing GA to optimize operation zones with predefined shape can provide better and realistic outcomes through limited iterations.     

Evaluation and comparison of alarm reset modes in advanced control room of nuclear power plants

An automation function has been widely applied in main control room of nuclear power plants (NPPs). The alarm system of fourth nuclear power plant (FNPP) in Taiwan is also going to be developed with automatic technology that is expected to support the operators’ performance and reduce the number of alarms. In this study, an experiment with a training simulator as an advanced alarm system was conducted to compare the effects of different alarm reset modes on performance and subjective ratings. The objective was to evaluate the practicability of alarm system with only auto-reset function in FNPP. Results revealed that, using the auto-reset mode, participants had lower task load index (TLX) on effort in the first test trial and was more satisfied under multi-task condition. In contrast, using manual reset mode, participants were more satisfied on alarm handling, monitoring, and decision making. In other words, both reset modes are necessary to assist the operator in different aspects, but with only single reset mode is insufficient. The reset function in advanced alarm system therefore should be very flexible.     

Production of activated carbons from pyrolysis of waste tires impregnated with potassium hydroxide

Activated carbons were produced from waste tires using a chemical activation method. The carbon production process consisted of potassium hydroxide (KOH) impregnation followed by pyrolysis in N2 at 600-900 degrees C for 0-2 hr. The activation method can produce carbons with a surface area (SA) and total pore volume as high as 470 m2/g and 0.57 cm3/g, respectively. The influence of different parameters during chemical activation, such as pyrolysis temperature, holding time, and KOH/tire ratio, on the carbon yield and the surface characteristics was explored, and the optimum preparation conditions were recommended. The pore volume of the resulting carbons generally increases with the extent of carbon gasified by KOH and its derivatives, whereas the SA increases with degree of gasification to reach a maximum value, and then decreases upon further gasification.