Identifying primary stressors impacting macroinvertebrates in the Salinas River (California, USA): relative effects of pesticides and suspended particles

Laboratory dose-response experiments with organophosphate and pyrethroid pesticides, and dose-response experiments with increasing particle loads were used to determine which of these stressors were likely responsible for the toxicity and macroinvertebrate impacts previously observed in the Salinas River. Experiments were conducted with the amphipod Hyalella azteca, the baetid mayfly Procloeon sp., and the midge Chironomus dilutus (Shobanov, formerly Chironomus tentans). The results indicate the primary stressor impacting H. azteca was pesticides, including chlorpyrifos and permethrin. The mayfly Procloeon sp. was sensitive to chlorpyrifos and permethrin within the range of concentrations of these pesticides measured in the river. Chironomus dilutus were sensitive to chlorpyrifos within the ranges of concentrations measured in the river. None of the species tested were affected by turbidity as high as 1000 NTUs. The current study shows that pesticides are more important acute stressors of macroinvertebrates than suspended sediments in the Salinas River.     

Understanding self-evaluations of effectiveness by forestry advisory committee members: a case of Ontario's Local Citizens Committee members

Researchers have devised many criteria that could assist with the development of an effective public participation process. Few studies, however, have linked these criteria to the effectiveness of decision-making resulting from these processes. We assess whether several criteria postulated by others for designing an effective decision-making process are associated with evaluations of the effectiveness of decision-making by advisory group members from a forest management planning process in Ontario, Canada. Data were collected by written questionnaires from 197 advisory group members in 2001. Four criteria were linked to the effectiveness evaluations including process control (influence), trust in decision-makers, information credibility, and process efficiency. The criterion of knowledge along with contextual variables related to experience, economic dependence on forestry, and geographical residence were not associated with evaluations of effectiveness.     

Short-term variation and long-term changes in the oceanographic environment and zooplankton community in the vicinity of a sub-Antarctic archipelago

 Mesozooplankton community structure in the vicinity of the Prince Edward Islands (PEIs) was investigated during six surveys conducted in late austral summer (April/May) from 1996 to 1999. Zooplankton samples were collected by oblique tows using a Bongo net fitted with 300-μm mesh. Surface temperature, average temperature and chlorophyll a were measured in conjunction with each net tow. The positions of the Sub-Antarctic Front (SAF) and the Antarctic Polar Front (APF), in relation to the islands, were determined by CTD and/or XBT transects to the west of the islands (upstream). Both fronts were characterized by a high degree of latitudinal variation. Changes in position of the fronts occurred rapidly, the SAF moving up to ∼120 km in a 2-week period. Consequently, the oceanographic environment in the vicinity of the PEIs was subject to a high degree of intra- and inter-survey variation. The positions of the SAF and APF appeared to have a significant impact on phytoplankton biomass in the vicinity of the PEIs, possibly through the alteration of local oceanographic flow dynamics. Water retention over the island shelf in 1996, associated with location of the SAF far to the north of the PEIs, corresponded to enhanced chlorophyll-a concentrations (∼1.54 mg m⁻³). Conversely, when the fronts were close to the islands, as in 1997 and 1999, higher current velocity limited water retention and chlorophyll-a concentrations in the inter-island region were relatively low (∼0.4 mg m⁻³). Cluster analyses showed that, in many instances, there was greater similarity among zooplankton communities from different surveys than among communities within surveys, indicating that short-term variability exceeded inter-annual variability. The population structure of the copepod Calanus simillimus indicated that there was inter-annual variation in the timing of the biological season. Differences in the population structure of species, and consequently their contribution to abundance and biomass, may therefore have been an important contributor to inter-annual variation in community structure. Evidence is provided of a long-term southward shift in the position of the SAF. It is postulated that this may affect the PEIs by increasing the proportion of allochthonous energy input, because the PEIs now lie in the path of the front, altering the tropho-dynamics of the island ecosystem. Lower mesozooplankton biomass associated with warmer sub-Antarctic water may have important negative consequences for higher trophic levels that depend on mesozooplankton for food. Received: 10 June 2000 / Accepted: 22 September 2000     

Differential Individual Particle Analysis (DIPA): applications in particulate matter characterization

Operator-controlled and computer-controlled scanning electron microscopy (CCSEM) are used extensively to characterize particulate matter in environmental media. Analysis in a scanning electron microscope (SEM) coupled with chemical extraction is a potentially powerful tool that is capable of determining how various sample components are associated at the individual particle level. This involves initial characterization in a SEM, after which the material is exposed to a liquid or gas phase reaction for a specified time, and once exposure is concluded, the particles are reanalyzed in the SEM. This particle analysis by difference, or differential individual particle analysis (DIPA), possesses considerable potential for describing the behavior of environmental particles under changing chemical conditions. Here we describe DIPA applications with illustrative examples drawn from the analysis of particulate matter modified by reactions in a fluid environment. In situ DIPA permits the same particles to be analyzed in the SEM before and after modification. Repeated exposure to the same, or different modifying conditions, provides information on the time dependence of specific reactions. Significant numbers of particles can be analyzed using CCSEM, and the same particles can be analyzed after the reaction by accurate sample relocation in the SEM. Ex situ DIPA, which involves a bulk sample modification, uses CCSEM to characterize significant numbers of particles pre- and postreaction. The CCSEM approach is extremely efficient; recent developments in silicon drift detectors have increased the speed of characteristic X-rays detection, and very large numbers of particles can be analyzed in a short period of time.     

The effects of regional angling effort, angler behavior, and harvesting efficiency on landscape patterns of overfishing

We used a coupled social-ecological model to study the landscape-scale patterns emerging from a mobile population of anglers exploiting a spatially structured walleye (Sander vitreus) fishery. We systematically examined how variations in angler behaviors (i.e., relative importance of walleye catch rate in guiding fishing site choices), harvesting efficiency (as implied by varying degrees of inverse density-dependent catchability of walleye), and angler population size affected the depletion of walleye stocks across 157 lakes located near Thunder Bay (Ontario, Canada). Walleye production biology was calibrated using lake-specific morphometric and edaphic features, and angler fishing site choices were modeled using an empirically grounded multi-attribute utility function. We found support for the hypothesis of sequential collapses of walleye stocks across the landscape in inverse proportionality of travel cost from the urban residence of anglers. This pattern was less pronounced when the regional angler population was low, density-dependent catchability was absent or low, and angler choices of lakes in the landscape were strongly determined by catch rather than non-catch-related attributes. Thus, our study revealed a systematic pattern of high catch importance reducing overfishing potential at low and aggravating overfishing potential at high angler population sizes. The analyses also suggested that density-dependent catchability might have more serious consequences for regional overfishing states than variations in angler behavior. We found little support for the hypotheses of systematic overexploitation of the most productive walleye stocks and homogenized catch-related qualities among lakes sharing similar access costs to anglers. Therefore, one should not expect anglers to systematically exploit the most productive fisheries or to equalize catch rates among lakes through their mobility and other behaviors. This study underscores that understanding landscape overfishing dynamics involves a careful appreciation of angler population size and how it interacts with the attributes that drive angler behaviors and depensatory mechanisms such as inverse density-dependent catchability. Only when all of these ingredients are considered and understood can one derive reasonably predictable patterns of overfishing in the landscape. These patterns range from self-regulating systems with low levels of regional fishing pressure to sequential collapse of walleye fisheries from the origin of angling effort.     

Transport of Sewage Sludge From the 106-Mile Site - Results From an October Survey

Abstract

Approximately 8 million tons of sewage sludge were disposed of annually at the 106-Mile Deepwater Municipal Sludge Dump Site (106-Mile Site) between 1987 and 1990. Beginning in 1988 and continuing to the present, the focus of monitoring at the 106-Mile Site moved towards improved understanding of the fate of the sludge. A survey conducted in October 1989 was designed to (1) detect the presence of any sludge particles that settle rapidly following disposal, (2) determine if sludge could be detected in the surface waters at locations away from the immediate disposal site, and (3) determine if water quality was degraded, by assessing whether the Environmental Protection Agency's marine water quality criteria were being exceeded.

The survey showed that the sludge does have a rapidly settling component composed of organic floc. mineral grains, and other heavy, gritlike particles, all of which are relatively large. These particles may settle at rates of between 8 and 180 m h^?1 and may reach the sea floor within 1 to 13 days following disposal. Even though a rapidly settling component is present in the sludge, a significant fraction of the sludge was detectable in the form of intact sludge plumes in the upper 35 m of the water column at least 15 km from the Site. in addition, unique tracers of sludge such as xylem tracheids and Clostridium perfringens plus elevated total suspended solids and trace metals concentrations, were found at locations up to 40 km from the Site. the presence of these tracers correspond with in situ transmissometry data suggesting that a fraction of the sludge was remaining in the near-surface waters above the seasonal pycnocline. Concentrations of metals were below EPA chronic marine water quality criteria, which indicates that the water quality downstream of the Site was not impaired. the detection of sludge downstream of the 106-Mile Site is consistent with the southwestward movement of the surface water mass during the survey, as recorded by satellite-tracked surface drifters and current vectors derived from a current meter moored at 100-m depth immediately west of the Site. Near-surface transport was generally towards the southwest at a speed of approximately 22 cm s^?1?.     

Development of environmental policy,objectives, and targets

This paper describes a process to develop and establish an environmental policy and its associated environmental targets, objectives, and management programmes. The environmental policy is defined in a statement which addresses the company expectations for programmes that are important to assure adequate environmental protection and define its future commitment towards preventing pollution and continuously improving the effectiveness of its environmental protection programmes. A set of environmental objectives, derived from the policy, define the overall goals which will ensure that the company's environmental performance will remain consistent with the commitment identified in its policy when its environmental management system (EMS) is implemented, Environmental targets reflect the requirements and standards that the company must strive to achieve each objective and minimize any harmful environmental impacts from its production and manufacturing processes or other activities. In addition to defining specific targets, environmental management programmes are also used to guide EMS implementation. These programmes, however, must provide the company with the necessary flexibility to select the most appropriate technologies to enhance its own processes and prudently allocate its available financial resources in areas that return the greatest overall environmental benefit.Though they are expected to allow some discretion in the allocation of resources targeted towards environmental protection, EMS programmes must also provide assurance that the corporation environmental policy, objectives, targets, and management programmes do not result in a facility failure to adhere to all of its certification requirements. The principle and factors described in this article should be considered to the extent that they are necessary and practical.     

Suspension and resuspension of dry soil indoors following track-in on footwear

Contamination of the indoor environment by tracked-in outdoor soil has the potential to pose a significant human health threat through exposure to hazardous soil constituents. The indoor distribution of (contaminated) soil following ingress is important when evaluating exposure risk. Here, the time evolution of size-resolved airborne particulate matter aerosolized as a result of mechanical (i.e., footfall or step-on) impacts on a floor surface with a layer of dry soil was investigated using laser particle counters. Suspended particle levels were recorded after step-on impacts that aerosolized soil particles at a single contact point by the action of a human tester who followed a pre-determined walking pattern. The experimental design presumed that the floor area immediately upon entrance indoors is the location of maximum deposition of outdoor soil transferred on footwear. The suspension of soil resulting from the first step-on floor contact and the subsequent resuspension of soil resulting from additional step-on events were quantified by various arrangements of four laser particle counters. Step-on impacts produced a transient increase in particle levels at various lateral distances and heights from the contact point. Also, with increasing distance and height from the step-on contact point, the level of suspended particles after successive step-on events decreased markedly. The results suggested that a lateral component of the dispersion process was more significant than a vertical one under these experimental conditions. A wall jet effect created by the impact of the footfalls on the floor surface was considered responsible for the apparent greater lateral dispersion of the soil particles.     

Analytical solutions for flow induced by a vertically distributed turbulent plume

Environmental Fluid Mechanics - Analytical solutions are developed for the flow induced by a vertically distributed turbulent plume in an otherwise quiescent uniform environment. The plume...