Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

Possible routes for lead accumulation in feral pigeons (Columba livia)

This study examined possible routes for lead (Pb) accumulation in resident pigeons collected from rural, urban, and four industrial sites in Korea. The accumulation pattern of Pb was comparable to the study sites. The highest Pb concentration was found in the bone, followed by kidney, liver, and lung of pigeons. Highest Pb residues in bones were found in urban (Seoul), and two industrial complex areas (Busan and Ulsan), which were about 15 times higher than rural area (Duckjuk island), and followed by Ansan and Yochon industrial areas. Regional Pb variations in liver, kidney, and lung tissues were also similar pattern with the bone Pb difference. These findings indicate that Pb accumulation in tissues of pigeons may be affected by the Pb exposure in their respective habitats. Crop contents and gizzard materials were investigated as representing the ingested items. No difference of Pb concentration was observed in major foods (maize and/or wheat) of crop contents in the study sites except Busan, whereas variations of Pb levels in gizzard materials were indicative of a similar pattern with tissue Pb differences. The Pb concentration in tissues of pigeons did not correspond well to the atmospheric Pb levels. With regard to possible Pb sources, ingested items especially materials present in the gizzard are important sources for Pb contamination to pigeons because Pb-containing sources may be expected to present in roadside particles, dusts, paint chips and building flakes. However, air Pb value being low may not affect significant as the regional variations in tissues of pigeons.     

Determining soil quality in urban agricultural regions by soil enzyme-based index

Urban agricultural soils are highly variable, and careful selection of sensitive indicators is needed for the assessment of soil quality. This study is proposed to develop an index based on soil enzyme activities for assessing the quality of urban agricultural soils. Top soils were collected from urban agricultural areas of Korea, and soil chemical properties, texture, microbial fatty acids, and enzyme activities were determined. The soils belonged to five textural classes with the highest frequency of sandy loam. There was no clear correlation between the soil chemical properties and soil microbial properties. Principal component analysis (PCA) and factor analysis were applied to microbial groups for identification of microbial community variation in soils. Two soil groups, namely group 1 (G1) and group 2 (G2), based on microbial community abundance were examined by PCA, and those were more prominent in factor analysis. The G1 soils showed higher microbial community abundance than G2 soils. The canonical discriminant analysis was applied to the enzyme activities of sandy loam soil to develop an index, and the index validation was confirmed using the unused soils and published data. The high-quality soils in published literature assigned the high valued index. Microbial fatty acids and soil enzyme activities can be suitable indicators for soil quality evaluation of urban agricultural soils.

     

Effect of biochar addition on short-term N<Subscript>2</Subscript>O and CO<Subscript>2</Subscript> emissions during repeated drying and wetting of an anthropogenic alluvial soil

Agricultural soils are an important source of greenhouse gases (GHG). Biochar application to such soils has the potential of mitigating global anthropogenic GHG emissions. Under irrigation, the topsoils in arid regions experience repeated drying and wetting during the crop growing season. Biochar incorporation into these soils would change the soil microbial environment and hence affect GHG emissions. Little information, however, is available regarding the effect of biochar addition on carbon dioxide (CO₂) and nitrous oxide (N₂O) emissions from agricultural soils undergoing repeated drying and wetting. Here, we report the results of a 49-day aerobic incubation experiment, incorporating biochar into an anthropogenic alluvial soil in an arid region of Xinjiang Province, China, and measuring CO₂ and N₂O emissions. Under both drying–wetting and constantly moist conditions, biochar amendment significantly increased cumulative CO₂ emission. At the same time, there was a significant reduction (up to ~20 %) in cumulative N₂O emission, indicating that the addition of biochar to irrigated agricultural soils may effectively slow down global warming in arid regions of China.     

Characterizations of biochar from hydrothermal carbonization of exhausted coffee residue

The aim of this study was to produce renewable energy from exhausted coffee residue, which is a form of biomass. As coffee preference continues to increase, the importation of coffee beans has been increasing sharply. However, the amount of coffee that is actually consumed is only about 0.2% of coffee beans, while the spent coffee beans are discarded in the form of exhausted coffee residue. Hydrothermal carbonization is a method of producing an improved fuel from renewable energy sources by changing the physical and chemical properties of biochars. Biochars were obtained from a variety of reaction temperatures during hydrothermal carbonization and analyzed using elemental analysis, ultimate analysis, and calorific value measurement. The atomic C/O and C/H ratios of all obtained biochars decreased and were found to be similar to those of lignite and sub-bituminous coal. The highest energy recovery efficiency of biochar indicates that the optimum reaction temperature for hydrothermal carbonization was between 210 and 240 °C, which produced biochars with calorific value of approximately 26–27 MJ/kg. The spectra of biochars obtained from Fourier transform infrared spectroscopy (FTIR) showed fewer C–O and aliphatic C–H functional groups, but more carbonyl C=O functional groups and aliphatic CH _x groups. The results of this study indicate that hydrothermal carbonization can be used as an effective means to generate highly energy-efficient renewable fuel resources from coffee residue. The thermogravimetric analysis provided the changing combustion characteristics due to increased fixed carbon content.     

An agenda for assessing and improving conservation impacts of sustainability standards in tropical agriculture

Sustainability standards and certification serve to differentiate and provide market recognition to goods produced in accordance with social and environmental good practices, typically including practices to protect biodiversity. Such standards have seen rapid growth, including in tropical agricultural commodities such as cocoa, coffee, palm oil, soybeans, and tea. Given the role of sustainability standards in influencing land use in hotspots of biodiversity, deforestation, and agricultural intensification, much could be gained from efforts to evaluate and increase the conservation payoff of these schemes. To this end, we devised a systematic approach for monitoring and evaluating the conservation impacts of agricultural sustainability standards and for using the resulting evidence to improve the effectiveness of such standards over time. The approach is oriented around a set of hypotheses and corresponding research questions about how sustainability standards are predicted to deliver conservation benefits. These questions are addressed through data from multiple sources, including basic common information from certification audits; field monitoring of environmental outcomes at a sample of certified sites; and rigorous impact assessment research based on experimental or quasi‐experimental methods. Integration of these sources can generate time‐series data that are comparable across sites and regions and provide detailed portraits of the effects of sustainability standards. To implement this approach, we propose new collaborations between the conservation research community and the sustainability standards community to develop common indicators and monitoring protocols, foster data sharing and synthesis, and link research and practice more effectively. As the role of sustainability standards in tropical land‐use governance continues to evolve, robust evidence on the factors contributing to effectiveness can help to ensure that such standards are designed and implemented to maximize benefits for biodiversity conservation.     

Linking irreplaceable landforms in a self‐organizing landscape to sensitivity of population vital rates for an ecological specialist

Irreplaceable, self‐organizing landforms and the endemic and ecologically specialized biodiversity they support are threatened globally by anthropogenic disturbances. Although the outcome of disrupting landforms is somewhat understood, little information exists that documents population consequences of landform disturbance on endemic biodiversity. Conservation strategies for species dependent upon landforms have been difficult to devise because they require understanding complex feedbacks that create and maintain landforms and the consequences of landform configuration on demography of species. We characterized and quantified links between landform configuration and demography of an ecological specialist, the dunes sagebrush lizard (Sceloporus arenicolus), which occurs only in blowouts (i.e., wind‐blown sandy depressions) of Shinnery oak (Quercus havardii) sand‐dune landforms. We used matrix models to estimate vital rates from a multisite mark‐recapture study of 6 populations occupying landforms with different spatial configurations. Sensitivity and elasticity analyses demonstrated demographic rates among populations varied in sensitivity to different landform configurations. Specifically, significant relationships between blowout shape complexity and vital rate elasticities suggested direct links between S. arenicolus demography and amount of edge in Shinnery oak sand‐dune landforms. These landforms are irreplaceable, based on permanent transition of disturbed areas to alternative grassland ecosystem states. Additionally, complex feedbacks between wind, sand, and Shinnery oak maintain this landform, indicating restoration through land management practices is unlikely. Our findings that S. arenicolus population dynamics depended on landform configuration suggest that failure to consider processes of landform organization and their effects on species’ population dynamics may lead to incorrect inferences about threats to endemic species and ineffective habitat management for threatened or endangered species. As such, successful conservation of these systems and the biodiversity they support must be informed by research linking process‐oriented studies of self‐organized landforms with studies of movement, behavior, and demography of species that dwell in them.     

Comprehensive modeling of HFC-23 incineration in a CDM incinerator

Considering that a significant part of used refrigerants have to be destroyed in an environmentally friendly manner together with the high global warming potential (GWP) of HFCs (hydrofluorocarbons), the development of a proper incineration method of HFCs becomes one of the viable methods in the refrigeration and air-conditioning industry. To this end, in this study, the development of a comprehensive modeling of CHF₃ (HFC-23 or R-23) incineration is made to assist in the proper design and determination of optimal operating condition of a practical HFCs incinerator, since the refrigerant of CHF₃ is one of typical HFCs. For this, numerical investigation was performed by the development of a predictive model for the thermal destruction of the CHF₃ using CH₄–air flames in an incinerator designed for CDM (clean development mechanism) project. First of all, comparison between calculation and operation data was made to evaluate the program developed in this study. Numerical calculation of CHF₃–CH₄–air flame predicts successfully the operation data of a CDM incinerator such as temperature, CHF₃ destruction rate more than 99.99 % and other species concentrations such as CO and NO at the exit of the incinerator. Further parametric study was performed also in terms of important variables such as excess air, amount of steam and incinerator size. In general, the results obtained appear physically acceptable and give a clear physical insight into the role of the important variables. Further work is strongly recommended for the development of a general turbulent reaction model for the thermal destruction of HFCs, especially for the condition of non-equilibrium turbulent reaction dominance.