STORMWATER HARVESTING IN THE URBAN WATERSHEDS OF ARID ZONES1

ABSTRACT: A representative city in an arid zone, such as the Kingdom of Saudi Arabia, is instrumented to determine the quantity and quality of storm runoff with a view to investigating the possibility of using it for industrial and agricultural purposes after appropriate treatments. In an urban watershed in the City of Dhahran, Saudi Arabia, quantity and quality of storm runoff had been monitored for the past six years, and the average annual runoff that can be harvested was determined. The quality of runoff is well within the range of possible reuse schemes, most notably for restricted irrigation. Treatment schemes for the harvested water are proposed.     

PCDDs and PCDFs in water, sludge and air samples from various levels in a waste water treatment plant with respect to composition changes and total flux

A flux estimate of PCDDs and PCDFs through a waste water treatment plant has been made on an annual basis. The samples were collected from different steps in the treatment procedure within the plant i.e. inlet and outlet water, different sludge types and air samples. From the surroundings of the plant were collected samples of urban air, storm sewer water (urban runoff), plant discharge water and settling particulates from a sediment trap downstream the plant discharge. Differences in congener profiles were found between the samples taken within the plant compared to those collected outside. The flux of PCDD and PCDF equivalents through the plant was found to be approximately 0.4 – 0.5 g/year and the major part was taken away as digested sludge.     

PCBs,PCNs, PCDD/Fs,PAHs and Cl-PAHs in air and water particulate samples--patterns and variations

Methodology for the determination of biologically active polychlorinated biphenyls (PCBs), non-ortho PCBs, polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polycyclic aromatic hydrocarbons (PAHs) was used to investigate concentrations and patterns of certain chlorinated PAH (Cl-PAH) in source related samples using synthetic reference mixtures. Thus, in addition to the above mentioned compounds, mono-heptachlorosubstituted fluorenes, phenanthrenes/anthracenes and pyrenes/fluoranthenes (Cl-PAHs) were measured in vapour and particulate air samples from urban road tunnels, samples of settling particulate matter (SPM), and in bottom sediment samples from two point source locations (pulp and paper, and Mg-plant/Fe-Mn-smelter/chlor-alkali) and in the Baltic Sea. Concentrations in air samples followed: PAHs>PCBs>PCNs>non-ortho PCBs or Cl-PAHs>PCDD/Fs. SPM samples collected at increasing distance to the urban area of Stockholm showed: PAHs>PCBs>PCNs>PCDD/Fs>non-ortho PCBs or Cl-PAHs. For all compound groups there was a tenfold (Cl-PAHs fivefold) concentration decrease in SPM samples from highest levels in the urban water area to lowest levels at a distance of 26 km from city centre. PCB profiles of SPM showed similarities with combined profiles of Aroclor 1242 and 1254. PCN profiles of SPM showed similarities with combined profiles of Halowax 1099 and 1014. A correlation with concentration of all tested Cl-PAH and their corresponding parent PAH was found only for Cl-fluorene.     

Heavy metals in brick kiln located area using atomic absorption spectrophotometer: a case study from the city of Peshawar, Pakistan

Environmental pollution is one of the burning issues of the world. In developed countries, there are lot of awareness about the environment and the impact of various industries on their life and surroundings. A little has been done in this direction in developing countries. In Pakistan, a big problem is the rapid conglomeration of the brick kilns in the outskirts of nearly all the urban centers to cope with the rapid construction work in big cities. A huge amount of low-grade coal or rubber tires is used as fuel in a very non-scientific manner. The purpose of the present study was to look into the impact of the brick kilns on the different aspects of environmental pollution caused by these kilns. Concentration of metals Cu, Co, Zn, Pb, Cr, Ni, Cd, and Mn were measured on 36 soil samples collected from the area and the same number of plant samples in order to establish the distribution of heavy metals in the area and to determine the effect of this distribution on the surrounding atmosphere and the possible effects on human life.     

Concentrations,bioaccumulation, and health risk assessments of heavy metals in fishes from Nigeria’s freshwater: a general overview

Environmental Science and Pollution Research - Heavy metals (HMs) have attracted global attention due to their toxicity, persistence, and accumulation in aquatic fish in the polluted water...     

Assessment of Hg accumulation in fish and scalp hair in fishing communities along river Swat,Pakistan

Environmental Science and Pollution Research - Mercury (Hg) bioaccumulation in fish poses severe threats to the food safety and human health. This study was conducted to assess Hg bioaccumulation...     

Plant responses to metals stress: microRNAs in focus

Environmental Science and Pollution Research - Metal toxicity can largely affect the growth and yield of numerous plant species. Plants have developed specific mechanisms to withstand the varying...     

Effect of vehicle exhaust on the quantity of polycyclic aromatic hydrocarbons (PAHs) in soil

PAHs are formed during the incomplete combustion of organic substances containing carbon and hydrogen and are one of the first atmospheric pollutants identified as carcinogens. Most of the PAH environmental burden is found in the soil (95%). Soil samples collected from different roadsides were analyzed for seven polycyclic aromatic hydrocarbons (PAHs). The quantitative and qualitative analysis was carried out by UV Spectrophotometer. The individual PAH value ranged from 0.1 to 18.0 mg/kg. Phenenthrene and Pyrene were found to be the most abundant compounds. Vehicle emissions are the principal source of PAH in the Roadside soils. The highest concentration was found at site S2 (Hasthtnagri Roadside) which shows the highest traffic density.     

Testing common sediment-porewater distribution models for their ability to predict dissolved concentrations of POPs in The Grenlandsfjords, Norway

This study compares in situ observed porewater concentration of persistent organic pollutants (POPs) with predictions by common solid-water phase distribution models. Bottom sediments were sampled in The Grenlandsfjords, Norway, and the interstitial porewater was isolated from the solids by centrifugation and filtration. Both phases were analysed for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F), polycyclic aromatic hydrocarbons (PAH), and organic carbon. Based on the sediments' solid phase content of POPs, organic carbon, and soot carbon, we used the organic matter partitioning (OMP), and also the soot and organic matter partitioning (SOMP) model to estimate the porewater concentration. The OMP model gave better agreement to observations than the SOMP model for both PCDD/Fs and PAHs. The observed concentration of the PCDD/Fs in the sediments' porewater was much higher than in the deep water of the fjord. The logarithm of the organic matter-water partitioning coefficent (log K(OC)) in the porewater had positive linear regression on the logarithm of the octanol-water partitioning coefficient (log K(OW)). The slope of the regression model was indistinguishable from 1, except for the PAHs as a group which had a slope less than 1. This contrasts to previous studies undertaken in The Grenlandsfjords water column, where the slopes were higher than 1 for PCDD/Fs, and the K(OC) were much higher than the K(OW). One explanation may be that the influence of POPs adsorption to soots decrease because competitive sorption by other compounds in the sediment are higher than in the water column. This indicates that the sorption isotherms for these POPs need better understanding in order to be applicable in both the water column and the porewater.