中国土壤环境监测方法现状、问题及建议

综述了目前中国现行的土壤环境监测国家标准方法和环保、农业、林业等行业标准方法,指出国家标准和环保行业标准方法侧重于土壤污染物的检测,而农业和林业标准方法侧重于土壤营养元素及其有效态、理化指标的检测。针对现行标准方法存在的一些问题(如检测的土壤污染物种类少、部分方法先进性不足、土壤环境监测的基础研究薄弱以及方法的标准化尚待完善等),提出加强土壤监测标准方法的顶层设计、合理增加土壤污染物的控制种类,及时更新方法、发展多组分测定方法,加强标准方法研究的系统性、协调性,以及逐步增加原位监测标准方法等建议,为土壤监测技术的发展提供借鉴和参考。     

基于Landsat 8遥感数据的天津市地表温度反演

以Landsat 8遥感数据为数据源,进行天津市地表温度反演研究。首先采用单通道算法反演地表温度,并利用均值标准差法进行温度分级。然后建立不同温度等级面积比例的估算模型。再通过随机样点,从不同温度等级和土地覆盖类型2个角度,分别建立并比较不同类样点的地表温度与各指数的拟合模型。结果表明:次高温区域面积比例与人口密度、人均GDP都具有较高的决定系数;地表温度与NDVI、BAEM的二元线性回归决定系数高于地表温度与单一指数的决定系数;将样点分类后,低温点与MNDBI的决定系数高于其他温度等级样点,水域和植被样点与各种指数的决定系数高于其他地物类型样点。     

Approach to the management of magnesium slag via the production of Portland cement clinker

Journal of Material Cycles and Waste Management - This work aims to develop another approach to the management of magnesium slag (MS) via the production of Portland cement clinker. Thus, 0, 10, 20,...     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

"十三五"国家自然科学基金对能源环境管理领域的资助状况和趋势

能源环境管理是各界关注的热点话题,也是科学研究的重要方向.以国家自然科学基金资助能源环境管理领域的科研项目为基础数据信息,本文重点分析了"十三五"期间国家自然科学基金在该领域资助项目的总体特征、研究主题和热点变化,并结合新时代科学基金资助导向提出了可能的发展趋势.主要结论包括:①能源环境管理领域面上、青年、地区等自由探索类项目的立项绝对数和学科占比均呈上升趋势,并更多向青年学者倾斜,资助强度保持稳定;②碳、能源和环境是自由探索项目中出现频率最高的热词,与之相关的研究主题随着政策等调整具有动态变化特征;③能源环境管理领域重点、重大等引导类项目和优青、杰青、创新研究群体等人才类项目不断实现突破,增速明显,学科占比优势突出;④问题导向与本土情景、理论体系和一般规律、学科交叉融合,以及市场和微观主体作用是研究选题确立与项目申请时可能需要重点关注的方向.     

Comparison of different sequential extraction procedures for mercury fractionation in polluted soils

Environmental Science and Pollution Research - Three sequential extraction procedures (SEPs), modified Tessier, modified BCR, and CIEMAT, were compared for mercury fractionation in polluted soils....     

试论生态文明制度体系的构建

建立健全生态文明制度体系是推进我国生态文明建设的重点。党的十八届三中全会通过的《中共中央关于全面深化改革若干重大问题的决定》指出,生态文明制度体系应当包括决策制度、评价制度、管理制度与考核制度等内容。立足社会主义制度建设的中国特色,针对我国生态文明建设的具体需求,本文将生态文明制度体系解构为四大板块:绿色高效决策制度、生态有价评估制度、生态环境监管制度与生态优先考核制度,并进一步明确了各项制度构建工作的具体内容。生态文明制度体系的构建和不断完善,将为全面建成人与自然和谐的美丽中国提供系统保障。     

大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

Special issue on contamination,remediation and health for pollutants in natural aquatic,soil, sediments and atmospheric environments

Environmental Geochemistry and Health -     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.