Selective photocatalytic oxidation of steroid estrogens in presence of saccharose and ethanol as co-pollutants

The potential of the photocatalytic oxidation to selectively oxidise steroid estrogens, β-estradiol and 17α-ethynylestradiol, in the presence of saccharose and ethanol as co-pollutants was clearly demonstrated. The alkaline media conditions remained the most beneficial for the PCO regardless the presence of co-pollutants under consideration. Saccharose appeared to be the more powerful competitor than ethanol. The influence of the co-pollutants is explained by their competition for the adsorption sites and also scavenging of the OH-radicals.     

Wet oxidation of recalcitrant lignin water solutions: experimental and reaction kinetics

The purpose of the research was to study the behavior of lignin degradation under different conditions (T 110–190°C, pO₂ 0.5–1.5 MPa, pH 5, 9 and 12) and to develop a predictive model. Temperature increase improved lignin removal from 75% at 110°C to 100% at 190°C (experimental). Increasing the pH enhanced the lignin removal efficiency from 30 to 97% (experimental). The developed model predicted the lignin degradation and changes in COD, BOD and TOC. The model agreed well with the experimental data (R ² = 0.93 at pH 5 and 12).     

Effects of ultraviolet-B radiation on behaviour and growth of three species of amphibian larvae

Effects of ultraviolet-B (UV-B) radiation on amphibian embryos have been investigated in a number of studies, but the effects on larvae have received less attention. We investigated the effects of UV-B radiation on the behaviour and growth of larvae of three amphibians (Rana arvalis, Rana temporaria and Bufo bufo) in two different experiments. First, we tested whether larvae of the three species actively avoid UV-B exposure if given a choice. We found no evidence for active avoidance of UV-B or changes in activity in the presence of UV-B in any of the species. Second, we assessed the effects of natural (1.25 kJm(-2)) and enhanced (1.58 kJm(-2)) UV-B radiation on the survival and growth of the three species and found that the exposure to UV-B radiation did not have any effect on survival rates of any of the species. However, UV-B radiation had a positive effect on the growth of R. arvalis and R. temporaria, whereas the growth of B. bufo tadpoles was unaffected by the UV-B treatments. Our results suggest that a short-term exposure to UV-B radiation does not induce any UV-B avoidance behaviour in tadpoles of these three species. Furthermore, unlike some previous studies, the results suggest that the young tadpoles of these species are not negatively affected by UV-B radiation. In fact, our results demonstrate that a moderate amount of UV-B radiation enhance tadpole growth rates in two of the three species.     

Integrating Environmental Characteristics and Fisheries Management in Northern Finland River Impoundments

/ Three large rivers in northern Finland, the Kemijoki, Iijoki, and Oulujoki rivers, were dammed for hydropower generation in the 1940s-1960s. Due to differences in environmental conditions, these impoundments require detailed study to produce guidelines for fisheries management.Water quality, hydrology, vegetation, and geomorphology data of 16 impoundments were gathered. Shoreline land-use data were derived from maps, and fish assemblage data were collected by exploratory fishing and from the annual fishery statistics. The relations among environmental variables were studied, and a classification of the impoundments was developed by hierarchical cluster analysis. Consequently, three impoundment groups with different environmental characteristics were formed. Significant differences among impoundment groups were also detected in fish yield. We conclude that the variation in environmental conditions, together with differences in fish communities in the impoundments were important enough to justify the claim that impoundments of different types require different management strategies. KEY WORDS: Impoundments; River regulation; Fish assemblage; Water quality; Aquatic vegetation; Finland     

Traffic safety in the U.S.: re-examining major opportunities

INTRODUCTION: This article examines five major road-safety risk factors: exceeding posted speed limits, not using safety belts, driving while intoxicated, nighttime driving, and young drivers. METHOD: The importance of each of these factors is documented, known effective countermeasures (both policy and technology based) are discussed, and impediments to the implementation of these countermeasures in the United States are examined. RESULTS: Based on current understanding of the five major risk factors, and of the available countermeasures, there appear to be a variety of opportunities to make substantial gains in road safety using existing knowledge. The limited implementation of a variety of known countermeasures therefore appears to be inconsistent with high-level, strategic goals to improve road safety. Consequently, a recommendation is made to comprehensively re-examine the balance between the countermeasures discussed in this article and economic, mobility, and privacy concerns. IMPACT ON PUBLIC SAFETY: Such a re-examination is likely to result in broad support for these countermeasures, with a consequent major improvement in road safety.     

Characteristics and availability of fatal road-crash databases in 20 countries worldwide

INTRODUCTION: This study examined the characteristics and availability of fatal road-crash databases worldwide. METHOD: The study involved two parts. First, the major international road databases were briefly reviewed. Second, the national databases in 20 selected countries were examined. RESULTS: (a) the available international databases of fatal road crashes typically include aggregated data; (b) there is a national database of fatal road crashes in each country examined; (c) all countries provide aggregated crash data, but there are substantial restrictions on the availability of disaggregated data; and (d) overall, the crash data at the accident level are relatively similar, but there are substantial differences in the information at the person level. CONCLUSION: The results imply that international road safety research would greatly benefit from expanded availability of disaggregated fatal crash data worldwide.     

Spatially valid data of atmospheric deposition of heavy metals and nitrogen derived by moss surveys for pollution risk assessments of ecosystems

For analysing element input into ecosystems and associated risks due to atmospheric deposition, element concentrations in moss provide complementary and time-integrated data at high spatial resolution every 5 years since 1990. The paper reviews (1) minimum sample sizes needed for reliable, statistical estimation of mean values at four different spatial scales (European and national level as well as landscape-specific level covering Europe and single countries); (2) trends of heavy metal (HM) and nitrogen (N) concentrations in moss in Europe (1990–2010); (3) correlations between concentrations of HM in moss and soil specimens collected across Norway (1990–2010); and (4) canopy drip-induced site-specific variation of N concentration in moss sampled in seven European countries (1990–2013). While the minimum sample sizes on the European and national level were achieved without exception, for some ecological land classes and elements, the coverage with sampling sites should be improved. The decline in emission and subsequent atmospheric deposition of HM across Europe has resulted in decreasing HM concentrations in moss between 1990 and 2010. In contrast, hardly any changes were observed for N in moss between 2005, when N was included into the survey for the first time, and 2010. In Norway, both, the moss and the soil survey data sets, were correlated, indicating a decrease of HM concentrations in moss and soil. At the site level, the average N deposition inside of forests was almost three times higher than the average N deposition outside of forests.     

Echoes from the Past: A Healthy Baltic Sea Requires More Effort

Integrated sediment multiproxy studies and modeling were used to reconstruct past changes in the Baltic Sea ecosystem. Results of natural changes over the past 6000 years in the Baltic Sea ecosystem suggest that forecasted climate warming might enhance environmental problems of the Baltic Sea. Integrated modeling and sediment proxy studies reveal increased sea surface temperatures and expanded seafloor anoxia (in deep basins) during earlier natural warm climate phases, such as the Medieval Climate Anomaly. Under future IPCC scenarios of global warming, there is likely no improvement of bottom water conditions in the Baltic Sea. Thus, the measures already designed to produce a healthier Baltic Sea are insufficient in the long term. The interactions between climate change and anthropogenic impacts on the Baltic Sea should be considered in management, implementation of policy strategies in the Baltic Sea environmental issues, and adaptation to future climate change.     

Evaluation of resin and fatty acid concentration levels by online sample enrichment followed by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS)

Background, aim, and scope  In papermaking, there is a continuous interest both to minimize fresh water consumption and to reduce discharges into the environment. These general trends mean an increase in the amounts of detrimental substances, such as resin and fatty acids, in papermaking process waters. Resin acids, in particular, are responsible for much of the toxicity typically present in paper mill effluents and, for this reason, the routine and rapid monitoring of these compounds in various process streams is necessary. This also means that there is a continuous need to develop straightforward offline and online techniques to clarify problems occurring, for example, as a result of the introduction of more intensively closed systems of water circulation. In the present study, we describe the use of a novel, online, sample enrichment technique followed by atmospheric pressure chemical ionization–mass spectrometry (APCI-MS) suitable for monitoring the concentration levels of common resin and fatty acids in papermaking process waters. Materials and methods  The representative process water samples were taken from the grinding zone of a thermomechanical pulping mill. The samples were first preconcentrated in a precolumn C18, and the analytes were transferred online to MS. The high intensive [M–H]⁻ ion was used for the identification of each analyte since, according to the present ionization method, no other fragmentation was observed. Laboratory-scale, online measurements with an online sample feed were carried out by connecting a centrifugal pump and a ceramic filter to the APCI-MS. Results  Quality parameters, such as repeatability, linearity, and limit of detection (LOD), were determined by using dehydroabietic acid (DHAA) in order to evaluate the suitability of the method for the rapid screening of concentration levels. This method provided satisfactory linearity and a good correlation between analyte concentration and peak area. The suitability of the system for the continuous analysis of the same acids was evaluated in laboratory-scale, online experiments. In all cases, the response to changes in the analyte concentration was linear, and the repeatability of the system was also satisfactory. Discussion  Only a few studies have been published on the analysis of resin and fatty acids with MS techniques. The present method was applied to the monitoring of dehydroabietic, oleic, and stearic acids. The quality parameters were highly comparable with those reported earlier, and the LOD values of the DHAA were below the levels usually encountered in process waters. The quality parameters were only slightly higher than those obtained by the traditional methods of analysis, probably due to the absence of an effective sample clean-up before analysis. Conclusions  The results of the laboratory-scale, online experiments indicated that the online enrichment APCI-MS system is a suitable alternative for monitoring the concentration levels of selected resin and fatty acids in papermaking process waters. The method can be used, for example, to provide useful information about the concentration levels of these acids in different stages of the process, thus signaling possibly impending problems. In general, faster and simpler measurements are needed to meet the requirements for a reduction in fresh water usage in papermaking. Recommendations and perspectives  Compared to the conventional methods used for this purpose, the main benefits of the method are rapidity of measurement, simplicity of use, and absence of the need for multistage sample treatments (short analysis time). For this reason, this online method is more suitable for the control of papermaking by analyzing the concentration levels of interfering substances (i.e., selected resin and fatty acids) than an offline analysis detailing all the individual extractives-based compounds in process streams. It is also obvious that the technique can easily be modified for other environmental pollutants as well.