ASSESSING SATELLITE‐BASED AND AIRCRAFT‐BASED THERMAL INFRARED REMOTE SENSING FOR MONITORING PACIFIC NORTHWEST RIVER TEMPERATURE1

One central issue affecting the health of native fish species in the Pacific Northwest is water temperature. In situ observation methods monitor point temperatures, while thermal infrared (TIR) remote sensing captures spatial variations. Satellite‐based TIR sensors have the ability to view large regions in an instant. Four Pacific Northwest river reaches were selected to test the ability of both satellite‐based and moderate resolution aircraft‐based TIR remote sensing products to measure river temperatures. Images with resolutions of 5, 15, and 90 meters were compared with instream temperature observations to assess how along stream radiant temperatures are affected by resolution, reach width, and sensor platform. Where the stream reach can be resolved by the sensor, all sensors obtain water temperatures within ±2°C of instream observations. Along stream temperature variations of up to ±5°C were also observed. Trends were similar between two sets of TIR images taken several hours apart, indicating that the sensors are observing actual temperature patterns from the river surface. If sensor resolution is sufficient to obtain fully resolved water pixels in the river reach, accurate temperatures and spatial patterns can be observed. The current generation of satellite‐based TIR sensors is, however, only able to resolve about 6 percent of all Washington reaches listed as thermally impaired.     

Schwermetalle in Regenwürmern Baden-Württembergs

Goal and Scope

The heavy metal burden of the soil and of earthworms from representative long-term forest observation plots has been measured since 1984 as one component of the media-embracing environmental monitoring network of the State of Baden-Wuerttemberg. These investigations are aimed at elucidating and assessing adverse effects of pollutants on the soil biocenosis

Methods

So-called characteristic curves for the metals Cd, Cu, Ni, Pb, and Zn were developed for the assessment. Earthworm toxicity data and background values in soil served as criteria. This procedure facilitates a comparative assessment of different pollutants. The mobility of the metals, which greatly influences their bioavailability and toxicity, was taken into account for the effects assessment.

Results and Conclusion

Besides inventorying the heavy metals (Part 1), the question of threshold values for toxic reactions as well as for accumulation was raised. The metal concentrations were assessed in the soil with regard to its habitat function. The ecotoxicological assessment revealed that the heavy metal burden of the investigated plots lies within the background- or precautionary range, well below the screening value established here to indicate the effect threshold in earthworms. This result means that a pollution of the forest observation plots with the metals cadmium, copper, lead, nickel, and zinc is low or absent. Only the distribution of the lead content is centered slightly above background (but clearly below the toxicity threshold). This slight lead burden of the soil of the observation plots can be explained by emissions from motor vehicles. Investigations at sites that are contaminated with either chromium or copper or cadmium showed that an accumulation of these metals in the body of the worms can be observed only above a threshold concentration of several hundred micrograms of mobile metal per kilogram in the upper layer of the soil.

Recommendations and Perspectives

The hitherto unknown threshold values for the accumulation in the body of the earthworm should be statistically validated and extended to other elements. Further research is needed in order to build a well founded basis for the ecotoxicological assessment of soil pollution. Acute and chronic earthworm effect thresholds are neither available yet for arsenic, cobalt, and mercury nor for some other elements occurring less frequently as soil pollutants. Background values depending on the kind of rock have been measured so far for total chromium only. They are lacking for the more toxic chromium (VI) which is a frequent soil pollutant but naturally occurs in traces only.     

Schwermetalle in Regenwürmern Baden-Württembergs Teil 2: ?kotoxikologische Bewertung des Bodens

Methoden  

Zur Bewertung der gemessenen Schwermetallbelastungen des Bodens wurden sog. Risiko-Kennlinien für die Metalle Blei, Cadmium, Kupfer, Nickel und Zink entwickelt, die eine einheitliche Charakterisierung von Bodengehalten im Hinblick auf ihre Wirkung auf den Regenwurm sowie auf naturr?umliche Gegebenheiten erm?glichen. Die Mobilit?t der Metalle, die für die biologische Wirkung entscheidender ist als der Gesamtgehalt im Boden, wurde bei der Bewertung berücksichtigt.     

How stable are personalities? A multivariate view of behavioural variation over long and short timescales in the sheepshead swordtail,Xiphophorus birchmanni

Many studies have revealed repeatable (among-individual) variance in behavioural traits consistent with variation in animal personality; however, these studies are often conducted using data collected over single sampling periods, most commonly with short time intervals between observations. Consequently, it is not clear whether population-level patterns of behavioural variation are stable across longer timescales and/or multiple sampling periods or whether individuals maintain consistent ranking of behaviours (and/or personality) over their lifetimes. Here, we address these questions in a captive-bred population of a tropical freshwater poeciliid fish, Xiphophorus birchmanni. Using a multivariate approach, we estimate the among-individual variance-covariance matrix (I), for a set of behavioural traits repeatedly assayed in two different experimental contexts (open-field trials, emergence and exploration trials) over long-term (56 days between observations) and short-term (4-day observation interval) time periods. In both long- and short-term data sets, we find that traits are repeatable and the correlation structure of I is consistent with a latent axis of variation in boldness. While there are some qualitative differences in the way individual traits contribute to boldness and a tendency towards higher repeatabilities in the short-term study, overall, we find that population-level patterns of among-individual behavioural (co)variance to be broadly similar over both time frames. At the individual level, we find evidence that short-term studies can be informative for an individual’s behavioural phenotype over longer (e.g. lifetime) periods. However, statistical support is somewhat mixed and, at least for some observed behaviours, relative rankings of individual performance change significantly between data sets.     

Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of a third phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The aim of the project is to increase the understanding of the behaviour of sub-cooled non-flashing and superheated flashing liquid jets, and to improve the prediction of initial droplet size, droplet dispersion and rainout.Phase III of the JIP first included scaled experiments for materials with a range of volatilities (water, cyclohexane, butane, propane and gasoline). These experiments were carried out by Cardiff University including measurements of flow rate and initial droplet size across the full relevant range of superheats. See the companion paper II for further details of these experiments and the derivation of new refined correlations for droplet size distribution and Sauter Mean Diameter. Furthermore large-scale butane experiments were carried out by INERIS (France) to ensure that for more realistic scenarios the derived droplet size correlations are accurate.Model validation and model improvements were carried out by DNV Software, including validation of release rate and initial droplet size against the above scaled and large-scale experiments. New correlations for droplet size distribution and Sauter Mean Diameter (SMD) were implemented into the Phast discharge model. These were compared against a range of other droplet size and rainout correlations published in the literature, in conjunction with validation against an extensive set of experiments. It was shown that the new droplet size correlation agrees better against experimental data than the existing Phast correlation. To further improve the rainout prediction, the Phast dispersion model (UDM) was also extended to allow simultaneous modelling of a range of droplet sizes and distributed rainout (rather than rainout at one point).     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.     

The impact of Local Authorities’ interventions on household waste collection: A case study approach using time series modelling

At a local Government level there have been many interventions and changes made to household waste collection services to meet new regulatory requirements. These changes include separate collection of recyclable and organic materials. This paper has used a time series model to quantify the success of interventions introduced by a LA.The case study was a medium sized UK LA, Charnwood Borough Council (CBC), the research analyses monthly data of quantities of recyclates, garden waste for composting and residual waste for landfill disposal. The time series model was validated with a five year data set and used to measure the impacts of the various changes to identify which intervention was the most successful, while controlling for season and number of working days. The results show the interventions analysed both had abrupt and permanent positive impacts on the yield of recyclable materials, and a corresponding negative impact on the residual waste.The model could be added to the National data base to help LAs to compare interventions and to understand which schemes encourage householder participation and improve recycling performance.     

Prenatal diagnosis of Pompe's disease (type ii glycogenosis) in chorionic villus biopsy using maltose as a substrate

Uncultured trophoblasts obtained from chorionic villus biopsy during the gestation period of 8–12 weeks were assayed for alpha-glucosidase activity using maltose as the substrate. Only one major form of maltase activity with a pH optimum at 4.0 was demonstrated. Using this method, we performed prenatal diagnosis on three pregnancies at risk for the infantile form of type II glycogen storage disease. Two affected fetuses and one unaffected fetus were predicted and the diagnosis was subsequently confirmed. The maltose assay offered a direct, simple, and sensitive method for prenatal diagnosis of Pompe's disease in the first trimester.