Soil pH effects on the interactions between dissolved zinc,non-nano- and nano-ZnO with soil bacterial communities

Zinc oxide nanoparticles (ZnO NPs) are used in an array of products and processes, ranging from personal care products to antifouling paints, textiles, food additives, antibacterial agents and environmental remediation processes. Soils are an environment likely to be exposed to manmade nanoparticles due to the practice of applying sewage sludge as a fertiliser or as an organic soil improver. However, understanding on the interactions between soil properties, nanoparticles and the organisms that live within soil is lacking, especially with regards to soil bacterial communities. We studied the effects of nanoparticulate, non-nanoparticulate and ionic zinc (in the form of zinc chloride) on the composition of bacterial communities in soil with a modified pH range (from pH 4.5 to pH 7.2). We observed strong pH-dependent effects on the interaction between bacterial communities and all forms of zinc, with the largest changes in bacterial community composition occurring in soils with low and medium pH levels (pH 4.8 and 5.9). The high pH soil (pH 7.2) was less susceptible to the effects of zinc exposure. At the highest doses of zinc (2500 mg/kg dw soil), both nano and non-nano particulate zinc applications elicited a similar response in the soil bacterial community, and this differed significantly to the ionic zinc salt treatment. The results highlight the importance of considering soil pH in nanotoxicology studies, although further work is needed to determine the exact mechanisms controlling the toxicity and fate and interactions of nanoparticles with soil microbial communities.     

Ambient air monitoring of PCDD/Fs and co-PCBs in Gyeonggi-do, Korea

We started the monitoring for PCDD/Fs in ambient air and soil in August 2001, and co-PCBs in January 2002. Decreasing of PCDD/Fs and co-PCBs levels in ambient air were observed. The higher PCDD/Fs levels were found in winter and lower in autumn. We found that the industrial incinerators influenced the PCDD/Fs levels in ambient air. In the 2,3,7,8-substituted PCDD/Fs concentration profiles, the three major congeners occupied 67% of the total mass. In case of co-PCBs, PCB#118, #105 and #77 were observed as the main congeners. Five cluster groups discriminated by ratio of four components, O(8)CDD, 1,2,3,4,6,7,8-H(7)CDD, 1,2,3,4,6,7,8-H(7)CDF and O(8)CDF, were obtained from HCA (hierarchical cluster analysis).     

Assessing soil and groundwater contamination in a metropolitan redevelopment project

The purpose of this study was to assess contaminated soil and groundwater for the urban redevelopment of a rapid transit railway and a new mega-shopping area. Contaminated soil and groundwater may interfere with the progress of this project, and residents and shoppers may be exposed to human health risks. The study area has been remediated after application of first remediation technologies. Of the entire area, several sites were still contaminated by waste materials and petroleum. For zinc (Zn) contamination, high Zn concentrations were detected because waste materials were disposed in the entire area. For petroleum contamination, high total petroleum hydrocarbon (TPH) and hydrocarbon degrading microbe concentrations were observed at the depth of 7 m because the underground petroleum storage tank had previously been located at this site. Correlation results suggest that TPH (soil) concentration is still related with TPH (groundwater) concentration. The relationship is taken into account in the Spearman coefficient (α).     

Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.     

Estimation of methane emission potential using the Clean Development Mechanism (CDM) tool for municipal solid waste landfill in Mandalay,Myanmar

Journal of Material Cycles and Waste Management - Municipal solid waste (MSW) landfills are the third largest source of global methane emissions as biogas (11%). In developing countries, MSW...     

Metals in airborne particulate matter from the first and second industrial complex area of Taejon city, Korea

To understand the metal distribution characteristics in a rapidly urbanized area, we collected and analyzed particulate matter (PM) samples for the metal concentrations. Using our measurement data for various metal species, we examined both the extent of metal pollution in the study area and the seasonality in their distribution characteristics. Results showed that each metal exhibited their occurrences in diverse concentration ranges over several orders of magnitude such as the mean values ranging from minimum value of 0.07 (Be) to maximum value of 1633 ng m(-3) (Fe). In addition, the extent of metal pollution in the study area was in general comparable with those typically observed from a strongly polluted urban area, if comparison was made with the results of previous studies. Examinations of their temporal distribution patterns indicated that most of metals tend to exhibit seasonal peaks during winter (or spring) seasons, similarly to the observed pattern for PMs. Moreover to explain the factors regulating their mobilization properties, the data were analyzed through the application of correlation analysis. Results of our correlation analysis showed that most metals can exhibit strong positive correlations each other, while they tend to be inversely correlated with most of important meteorological parameters (including air temperature and precipitation). Based on the overall results of our study, we conclude that the site may be strongly impacted by man-made sources but that many characteristics of their cycling are not significantly different from those generally observed from natural environments.     

Escape responses of copepod nauplii in the flow field of the blue mussel,<Emphasis Type="Italic"> Mytilus edulis</Emphasis>

Bivalves are important grazers on phytoplankton in shallow waters. However, very little is known about their ability to capture actively moving zooplankton. We investigated the escape response and success of early and late nauplii of three copepod species (Acartia tonsa, Temora longicornis and Eurytemora affinis) in the flow field of a blue mussel, Mytilus edulis, using both video observations and incubation experiments. An empirical model was created to describe the spatial distribution of the fluid deformation rate. Nauplii responded with escape jumps at mean fluid deformation rates of 0.6-1.9 s^у. Escape success differed between taxa. T. longicornis was the poorest escaper, while A. tonsa and E. affinis were more efficient and similar to one another. Deformation rates differed in different parts of the flow field, which resulted in differences in escape success between the sectors. Nauplii were caught most often in the sector furthest away from the exhalent siphon, where the deformation rate was the weakest. There the nauplii were unable to detect an escape signal in time to react and flee.     

Optimization of the food waste water incineration with respect to CO and NO<Subscript>x</Subscript> emission characteristics

The incineration of food waste water in conjunction with the domestic waste is getting attention as a food waste water treatment method, due to its low treatment cost and high efficiency. Many studies verified that the ammonia in the food waste water served as a reducing agent to suppress the generation of NO_x when the food waste water was injected and incinerated. However, they have not revealed the correlation between the change in the concentration of the CO and NO_x by the influence of the solid matters contained in the food waste water on the incineration of the wastes. The purpose of this study is to determine the optimum amount of the food waste water injected through four nozzles in the primary and secondary incineration chambers and to assess the correlation between the concentration of CO and NO_x in accordance with the food waste water injection in each chamber of the incinerator. For the study, four food waste water injection nozzles were installed; two (A and B) at the top of the primary incineration chamber and the other two (C and D) in the secondary incineration chamber. The correlation between the change in the concentration of CO and NO_x was studied adjusting the amount of the food waste water injected through the nozzles. From the result, Case II showed the concentration of CO and NO_x as 1.8–10 and 14–26 ppm, respectively, while Case I showed that of CO and NO_x as 15–30 and 9–18 ppm, respectively. Those levels are well below the Korean emission criteria, 50 ppm for CO and 80 ppm for NO_x. Based on the results, it is evident there is a certain trade-off between emission of CO and NO_x, and Case II which has relatively low concentration of CO is easier and cheaper to control.