Adsorption of phosphate on magnetite-enriched particles (MEP) separated from the mill scale

MEP were separated from mill scale at low magnetic intensity i.e., 300 to 500 gauss. The phosphate adsorption capacity of MEP was determined 6.41 mg/g. MEP packed-bed columns were successfully regenerated with alkaline solution. Phosphate is a major pollutant in water, causing serious environmental and health consequences. In present study, the phosphate adsorption on novel magnetite-enriched particles (MEP) was comprehensively investigated. A new method and device were introduced for the separation of MEP from the mill scale at low magnetic intensity. Particles were characterized with different techniques such as XRD, XRF, SEM and EDS. The XRD and XRF analysis of MEP identified the dominant existence of crystalline magnetite. Furthermore, the morphological analysis of MEP confirmed the agglomerate porous morphology of magnetite. Oxygen and iron, the main constituents of magnetite were acknowledged during the elemental analysis using EDS. The phosphate adsorption on MEP is well explained using various isotherm and kinetic models, exhibiting the monolayer adsorption of phosphate on the surface of MEP. The maximum adsorption capacity was determined 6.41 mg/g. Based on particle size (45–75 and 75–150 µm) and empty bed contact time (1 and 2 h), four columns were operated for 54 days. MEP were appeared successful to remove all phosphate concentration from the column influent having 2 mg/L concentration. The operated column reactors were successfully regenerated with alkaline solution. The results indicated potential for practical application of the MEP for phosphate removal.     

Application of recycled aggregate porous concrete pile (RAPP) to improve soft ground

In this study, a series of laboratory chamber tests was carried out to evaluate the applicability of a porous concrete pile fabricated with recycled aggregates for soft ground improvement. The recycled aggregate porous concrete pile (RAPP) has been developed to replace natural aggregates and to overcome technical problems associated with the conventional compaction piling systems. The laboratory chamber tests for evaluating the performance of RAPP were carried out with a cylindrical mold of 280?mm in internal diameter and 580?mm in height. A replacement area ratio of 5?% and three different loading steps were applied in the chamber tests. The experimental results of the surface settlement, excess pore pressure and vertical stress distribution versus time were compared with those of the sand compaction pile (SCP) reinforced composite ground under the same experimental condition. In addition, the experimental results were compared with the numerical simulation using ABAQUS. The current study shows that the settlement reduction in the RAPP-reinforced system is?significantly enhanced due to load transfer from the soil formation to the RAPP. Furthermore, the comparison of consolidation rates shows that the RAPP can also accelerate the consolidation of soft clay formation because the RAPP behaves as a vertical drain.     

Production primaire pélagique de l'Etang de Berre en 1977 et 1978. Comparaison avec le milieu marin (Méditerranée nord-occidentale)

Measurements of primary production and photosynthetic efficiency were carried out in the brackish lake “Etang de Berre” near Marseilles (France), which is diluted by the Durance River, and in the area of Carry-le-Rouet (Mediterranean Sea) about 25 km off the Rhône River outlet. Primary production (¹⁴C) estimations were made in Etang de Berre from December 1977 to November 1978. The carbon uptake rates ranged between 38 and 1 091 mg C m^-3 d^-1, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2 310 mg C m^-2 d^-1, with an average of 810, representing 290 g C m^-2 per year and 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2 yr period. The values obtained from marine water (Carry-le-Rouet) ranged from 23 to 2 337 mg C m^-2 d^-1, with a weighted average of 319, representing about 110 g C m^-2 per year. The values in brackish water (Etang de Berre) ranged from 14 to 1 778 mg C m^-2 d^-1, with a weighted average of 682, representing 250 g C m^-2 per year and 38 400 tons per year of photosynthesized carbon for the whole lake. The values derived from both methods of primary production measurements are approximately similar. Net production (computed from biomass estimations by Utermöhl's method) was compared with gross photosynthetic production. The net production in marine water did not display significant variations: most values were usually near zero. On the other hand, net production in brackish water exhibited a number of clear variations compared with concentrations of gross photosynthetic production during the whole 2 yr period. This large difference between estimations of gross and net production may be due to grazing, which is high in Etang de Berre, but slower and more constant in seawater. The ratios of primary production: chlorophyll a and gross photosynthetic production: biomass were also studied. In Etang de Berre, the former ratio ranges between 0.57 and 3.75, with an average of 1.44; this is similar to previously reported values. The ratio gross production: biomass in Etang de Berre varies between 0.3 and 4.2, with an average of 1.27, also confirming previous data. The very high values calculated for marine waters in the present study may result from an under-estimation of biomass.     

Adsorption and clay-catalyzed degradation of erythromycin A on homoionic clays

Erythromycin has been widely used in food-producing animals and in humans, and is frequently detected as an organic pollutant in U.S. streams. In batch experiments with homoionic clays, the Freundlich isotherms were determined at 10 and 25 degrees C. The adsorption of erythromycin A was strongly influenced by clay type, exchanged cations, the pH of the bulk solutions, and the acidity of clay surfaces. The formation of clay-erythromycin A complexes was thermodynamically favorable except for K+- and Fe3+-exchanged montmorillonites, since the reactions were exothermic (deltaH(o) > 0) and the systems became stable (deltaS(o) > 0). Clays catalyzed the erythromycin A degradation by the hydrolysis of the neutral sugar and the multiple dehydrations. The surface acidity of clay surface enhanced the rate of clay-catalyzed degradation of erythromycin A. In addition, the Fe3+-exchanged clay minerals seemed to have an electrostatic interaction with the erythromycin A molecule, by which the hydrolysis of the neutral sugar was influenced.     

Environmental assessment of water, sediment and plants in the Mankyeong River, ROK

This study was carried out to evaluate water quality, sediment and plant vegetation in eight tributaries of the Mankyeong River for enhancement of natural purification. Among the tributaries, the Iksancheon water had the highest concentration of BOD, T-N and NH4-N due to inflow of swine wastes from the livestock district. The Yucheon water had the highest level of electrical conductivity and SO4(2-) due to inflow of mis-treated wastewater from industrial districts. The Tabcheon had generally similar concentrations of nitrogen and phosphate to that of the upstream of the Mankyeong River: agricultural activity along the Tabcheon appeared to have little negative influence to the water quality. Among various sediments, concentration of organic matter, nitrogen and phosphate were high in the Iksancheon and the Yucheon due to the livestock wastes and industrial wastes. There were 282 species of plants during summer with 43 aquatic plants, 57 hydrophytes, 178 waterside plants and 4 terrestrial plants. Some plant resources were recommended due to much absorption of nitrogen and phosphate for enhancement of natural purification. C. demersum and H. verticillata were recommended in the submerged aquatic plants, H. dubia, N. indica and N. subinteperrimum in the floating leaf aquatic plants, P. communis, Z. latifolia and T. orientalis in the emerged aquatic plants, C. scutata and P. distichum in the waterside plants.     

Sorption and biodegradation of vapor-phase organic compounds with wastewater sludge and food waste compost

To test the possible use of composted food waste and wastewater sludge as biofilters to treat gas-phase volatile organic compounds (VOCs), batch experiments were conducted with an isolated strain that could degrade aromatic compounds under aerobic conditions. A benzene and trichloroethylene (TCE) mixture was used as the gas-phase pollutant in experiments with composted food waste, sludge, and soil. Under aerobic conditions, benzene was degraded as a primary substrate and TCE was degraded cometabolically, with water contents varying from 6 to 60% (volume of water added/volume of solid). Optimal water content for VOC removal was 12% for the soil, 36% for the composted food waste, and 48% for the sludge. The extent of VOC sorption and biodegradation at the optimal water content was different for each material. With the same initial VOC concentration, more VOCs were removed by sorption onto the composted food waste and the sludge, while less VOCs were biodegraded in comparison with the results using soil. The reason the biodegradation in the soil was greater may be partly attributed to the fact that, due to less sorption, the aqueous-phase concentration of VOCs, which microorganisms could utilize as a carbon source or cometabolize, was higher. We also speculate that the distribution of microorganisms in each medium affects the rate of biodegradation. A large number of microorganisms were attached to the composted food waste and sludge. Mass transfer of VOCs and oxygen to these microorganisms, which appear to have been heterogeneously distributed in clusters, may have been limited, resulting in hindered biodegradation.     

Potential Tree Species for Use in the Restoration of Unsanitary Landfills

Given that they represent the most economical option for disposing of refuse, waste landfills are widespread in urban areas. However, landfills generate air and water pollution and require restoration for landscape development. A number of unsanitary waste landfills have caused severe environmental problems in developing countries. This study aimed to investigate the colonization status of different tree species on waste landfills to assess their potential for restoring unsanitary landfills in South Korea. Plot surveys were conducted using 10 × 10-m quadrats at seven waste landfill sites: Bunsuri, Dugiri, Hasanundong, Gomaeri, Kyongseodong, Mojeonri, and Shindaedong. We determined the height, diameter at breast height (DBH), and number of tree species in the plots, and enumerated all saplings ≤1 m high. Because black locust, Robinia pseudoacacia, was the dominant tree species in the waste landfills, we measured the distance from the presumed mother plant (i.e., the tallest black locust in a patch), height, and DBH of all individuals in black locust patches to determine patch structure. Robinia pseudoacacia, Salix koreensis, and Populus sieboldii formed canopy layers in the waste landfills. The basal area of black locust was 1.51 m²/ha, and this species had the highest number of saplings among all tree species. The diameter of the black locust patches ranged from 3.71 to 11.29 m. As the patch diameter increased, the number of regenerated saplings also tended to increase, albeit not significantly. Black locust invaded via bud banks and spread clonally in a concentric pattern across the landfills. This species grew well in the dry habitat of the landfills, and its growth rate was very high. Furthermore, black locust has the ability to fix nitrogen symbiotically; it is therefore considered a well-adapted species for waste landfills. Eleven woody species were selected for screening: Acer palmatum, Albizzia julibrissin, Buxus microphylla var. koreana, Ginkgo biloba, Hibiscus syriacus, Koelreuteria paniculata, Ligustrum obtusifolium, Liriodendron tulipifera, Pinus koraiensis, Pinus thunbergii, and Sophora japonica. As a result of a comparison of the total ratio (sum of shoot extension and diameter growth at the landfill relative to a reference site) and mortality, six species (Liriodendron tulipifera, Albizzia julibrissin, Ligustrum obtusifolium, Buxus microphylla var. koreana, Hibiscus syriacus, and Sophora japonica), which had a total ratio >1 and experienced low mortality, are recommended as potentially suitable species for waste landfill remediation. We suggest that mixed plantations of ubiquitous adaptable species and naturally occurring black locust will enhance the landscape through synergistic effects.     

Estimation of biogenic emissions with satellite-derived land use and land cover data for air quality modeling of Houston-Galveston ozone nonattainment area

The Houston-Galveston Area (HGA) is one of the most severe ozone non-attainment regions in the US. To study the effectiveness of controlling anthropogenic emissions to mitigate regional ozone nonattainment problems, it is necessary to utilize adequate datasets describing the environmental conditions that influence the photochemical reactivity of the ambient atmosphere. Compared to the anthropogenic emissions from point and mobile sources, there are large uncertainties in the locations and amounts of biogenic emissions. For regional air quality modeling applications, biogenic emissions are not directly measured but are usually estimated with meteorological data such as photo-synthetically active solar radiation, surface temperature, land type, and vegetation database. In this paper, we characterize these meteorological input parameters and two different land use land cover datasets available for HGA: the conventional biogenic vegetation/land use data and satellite-derived high-resolution land cover data. We describe the procedures used for the estimation of biogenic emissions with the satellite derived land cover data and leaf mass density information. Air quality model simulations were performed using both the original and the new biogenic emissions estimates. The results showed that there were considerable uncertainties in biogenic emissions inputs. Subsequently, ozone predictions were affected up to 10 ppb, but the magnitudes and locations of peak ozone varied each day depending on the upwind or downwind positions of the biogenic emission sources relative to the anthropogenic NOx and VOC sources. Although the assessment had limitations such as heterogeneity in the spatial resolutions, the study highlighted the significance of biogenic emissions uncertainty on air quality predictions. However, the study did not allow extrapolation of the directional changes in air quality corresponding to the changes in LULC because the two datasets were based on vastly different LULC category definitions and uncertainties in the vegetation distributions.     

AUTOMATED WEB GIS BASED HYDROGRAPH ANALYSIS TOOL,WHAT1

The separation of the base flow component from a varying streamflow hydrograph is called “hydrograph analysis.” In this study, two digital filter based separation modules, the BFLOW and Eckhardt filters, were incorporated into the Web based Hydrograph Analysis Tool (WHAT) system. A statistical component was also developed to provide fundamental information for flow frequency analysis and time series analysis. The Web Geographic Information System (GIS) version of the WHAT system accesses and uses U.S. Geological Survey (USGS) daily streamflow data from the USGS web server. The results from the Eckhardt filter method were compared with the results from the BFLOW filter method that was previously validated, since measured base flow data were not available for this study. Following validation, the two digital filter methods in the WHAT system were run for 50 Indiana gaging stations. The Nash‐Sutcliffe coefficient values comparing the results of the two digital filter methods were over 0.91 for all 50 gaging stations, suggesting the filtered base flow using the Eckhardt filter method will typically match measured base flow. Manual separation of base flow from streamflow can lead to inconsistency in the results, while the WHAT system provides consistent results in less than a minute. Although base flow separation algorithms in the WHAT system cannot consider reservoir release and snowmelt that can affect stream hydrographs, the Web based WHAT system provides an efficient tool for hydrologic model calibration and validation. The base flow information from the WHAT system can also play an important role for sustainable ground water and surface water exploitation, including irrigation and industrial uses, and estimation of pollutant loading from both base flow and direct runoff. Thus, best management practices can be appropriately applied to reduce and intercept pollutant leaching if base flow contributes significant amounts of pollutants to the stream. This Web GIS based system also demonstrates how remote, distributed resources can be shared through the Internet using Web programming.     

Heterogeneous Sulfate Formation on Dust Surface and Its Dependence on Mineralogy: Balloon-Borne Observations from Balloon-Borne Measurements in The Surface Atmosphere of Beijing, China

This study focuses on providing a direct insight into the process by which sulfate is formed on mineral dust surface in the actual atmosphere. Six sets of aerosol measurements were conducted in the outskirts of Beijing, China, in 2002–2003 using a tethered balloon. The mineralogy of individual dust particles, as well as its influence on the S (sulfur) loadings was investigated by SEM-EDX analysis of the directly collected particles. The mixed layer in the urban atmosphere was found to be quite low (500–600m), often appearing as a particle dense stagnant layer above the surface. It is suggested that mineral dust is a common and important fraction of the coarse particles in Beijing (35–68%), and that it is relatively enriched with Calcite (>28%). An exceptional amount of S was detected in the mineral particles, which can be explained neither by their original composition, nor by coagulation processes between the submicron sulfates and the dust. Heterogeneous uptake of gaseous SO₂, and its subsequent oxidation on dust was suggested as the main pathway that has actually taken place in the ambient environment. The mineral class found with the largest number of particles containing S was Calcite, followed by Dolomite, Clay, Amphibole etc., Feldspar, and Quartz. Among them, Calcite and Dolomite showed distinctly higher efficiency in collecting sulfate than the other types. A positive correlation was found with the number of S containing particles and the relative humidity. Calcite in particular, since almost all of its particles was found to contain S above 60% r.h. On the other hand, the active uptake of SO₂ by the carbonates was not suggested in the free troposphere downwind, and all the mineral classes exhibited similar S content. Relative humidity in the free troposphere was suggested as the key factor controlling the SO₂ uptake among the mineral types. In terms of sulfate loadings, the relationship was not linear, but rather increased exponentially as a function of relative humidity. The humidity-dependent uptake capacity of mineral types altogether showed an intermediate value of 0.07 gSO₄ ²⁻ g⁻¹ mineral at 30% r.h. and 0.40 gSO₄ ²⁻ g⁻¹ mineral at 80%, which is fairly consistent with laboratory experiments.