Determination of estrogenic compounds in wastewater using liquid chromatography-tandem mass spectrometry with electrospray and atmospheric pressure photoionization following desalting extraction

Two complementary LC-MS ionization methods, electrospray (ESI) and atmospheric pressure photoionization (APPI), have been optimized to determine three natural estrogenic compounds (estrone, 17beta-estradiol and estriol) and two synthetic estrogenic compounds (17alpha-ethynylestradiol and diethylstilbestrol) in the influent and effluent of wastewater treatment plants (WWTPs). The wastewater samples were first subjected to solid-phase extraction coupled with desalting extraction to remove matrix interference. The analytes were then detected using liquid chromatography-tandem mass spectrometry (LC-MS-MS) with ESI and dopant-assisted (DA) APPI to evaluate the ion suppression effect and to complement the detection and quantification of estrogenic compounds in complex wastewater samples. The average ion suppression factors for the extracts of the WWTP influent analyzed using ESI and APPI were 52+/-5% and 27+/-7%, respectively. The sensitivity and ionization efficiency of the LC-ESI-MS-MS system decreased dramatically when a complex matrix was present in the WWTP influent sample. Estrogenic compounds could be detected in the WWTP influent and effluent samples at concentrations below the parts-per-billion level. The lower detection limits obtained when using ESI and the higher matrix tolerance of the APPI method allowed the complete quantification of estrogenic compounds in very complex samples in a complementary manner.     

The Reuse of Biosludge as an Adsorbent from a Petrochemical Wastewater Treatment Plant

Abstract

Biosludge was obtained from a petrochemical industry’s biological wastewater treatment plant. Zinc chloride (ZnCl₂) was used as a sludge activation agent during the pyrolytic process. Scanning electron microscope (SEM) image photographs, element composition, surface functional group, and pore structure were analyzed for the sludge adsorbent characteristics. Results indicated the proper ZnCl₂-immersed concentration, pyrolytic temperature, and time could produce adsorbent from the bio-sludge. The optimal conditions for a larger surface area adsorbent were 3 M ZnCl₂-immersed sludge pyrolyzed at 600 °C for 30 min and washed with 3 N hydrochloric acid (HCl) solution and distilled water. The predominant pore size of the sludge adsorbent was the mesopore.     

Bacterial diversity in paclobutrazol applied agricultural soils

The aim of this study was to investigate the bacterial communities on paclobutrazol [(2RS, 3RS)-1-(4-Chlorophenyl)-4, 4-dimethyl-2-(1H-1,2,4-triazol-1-yl) pentan-3-ol]–applied agricultural soils by denaturing gradient gel electrophoresis (DGGE) of polymerase chain reaction (PCR) amplified 16S rDNA gene fragments. Three different agricultural soil samples were collected from paclobutrazol applied mango and waxapple orchards, peanut fields and untreated rice fields as a control for DGGE analysis. The DGGE pattern of PCR- generated 16S rDNA gene fragments indicated that the bacterial populations from four paclobutrazol–applied soils of peanut fields were closely related to each other and two paclobutrazol–applied soils of mango and waxapple orchards harbored closely related bacterial communities. But, paclobutrazol–free agricultural soils comprised relatively a different bacterial group. However, the bacterial populations of mango and waxapple orchard are completely different from the bacterial communities of peanut field. Further purification and sequence analysis of 40 DGGE bands followed by phylogenetic tree assay showed similar results that soil bacteria from paclobutrazol applied mango and waxapple orchard are phylogenetically related. Based on the phylogenetic analysis, the clone M-4 was clad 100 % (bootstrap value) with Mycobacterium sp. The Mycobacterium sp. has been proved to degrade the phenolic compounds such as phenol, 4-chlorphenol, 2,4-dichlorophenol and paclobutrazol molecule containing chlorobenzene ring.     

Degradation of di-butyl-phthalate by soil bacteria

Twelve Gram-positive phthalate ester degraders were isolated from soil. Using Biolog GP2 plates, eight of them were identified as belonging to the Corynebacterium-Mycobacterium-Nocardia group, while the remaining four were unidentifiable. When cultured in the presence of di-butyl-phthalate (DBP) in basal salts solution, five of these isolates accomplished more than 90% of DBP degradation within 48 h (fast group), three were placed in the medium group, and the remaining four were placed in the slow group which caused less than 30% of DBP degradation within the same period of time. A 420 bp DNA fragment was amplified from six isolates and none of them fell within the slow group. When compared with the large subunit of phthalate dioxygenase gene (phtA) of Arthrobacter keyseri, 83% and 91% similarities were evident in the nucleotide and amino acid sequences, respectively. However, no correlation between cell surface hydrophobicity and phthalate degradation ability was evident. Six surfactants (Brij 30, Brij 35, Tergitoltype NP-10, Triton N-101, Triton X-100 and SDS) were tested for their abilities to increase degradation rate. When added at the critical micellar concentration (CMC), they all displayed strong growth inhibition against the three bacteria tested, with Brij 30 been the least toxic to isolates G2 and G11, and Brij 35 had the least inhibitory effect for G1. When half the CMC of Brij 30 was incorporated into the basal salts, the inhibitory effect on DBP degradation remained. Soil helped to minimize surfactant toxicity of surfactant and increase the degradation potential of some of the test bacteria. When DBP-amended soil had been aged for three months, decreases in bioavailability were observed but the effect varied tremendously between different organisms. For isolates G1, G2, G5, G7 and G17 the aging effects were almost non-exist. The present study indicates that selection of a suitable degrader may minimize the undesired effect of aging on bioremediation process.     

Adsorption characteristics of benzene on biosolid adsorbent and commercial activated carbons

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl2) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl2-immersed biosolids pyrolyzed at 500 degrees C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

High Toughness and Fast Crystallization Poly(Lactic Acid)/Polyamide 11/SiO<Subscript>2</Subscript> Composites

A poly(lactic acid) (PLA)/polyamide 11 (PA11)/SiO₂ composite was mixed from PLA, PA11, and nanosilica particles through twin-screw extrusion. The PLA/PA11/SiO₂ composite was evaluated with tensile and Izod impact tests, light transmission and haze measurement, and isothermal and nonisothermal crystallization behavior determinations. The PLA/PA11/SiO₂ (97.0/3.0) composite had approximately 10.8% less ultimate tensile strength than neat PLA, but it had greater ductility and approximately ninefold greater elongation at break. A dimple morphology was observed on the fractural surface of the PLA/PA11/SiO₂ composite, indicating that the incorporation of PA11 and nanosilica particles increased the ductility of the PLA matrix. PLA with less than 3 wt% of PA11 and 0.5 phr of nanosilica particles had an Izod impact strength of 8.72 kJ/m². PA11 and nanosilica particles effectively toughened this PLA polymer; they accelerated both isothermal and nonisothermal crystallization rates and increased the crystallinities of the resulting composites under isothermal and nonisothermal crystallization processes.     

Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion

Chemical treatments are widely employed to improve the fiber-matrix adhesion in composites based on eco-friendly fibers such as flax. To better understand the influence of these treatments on processing behavior, this study characterized the surface chemistry and morphology of woven flax fabrics treated by acetone, alkaline, silane and diluted epoxy. Flax/epoxy composites were then manufactured by resin infusion and the flow front and preform thickness evolution was monitored. The alkaline treatment was shown to result in a 50 % increase in equivalent permeability due to an increase in porosity which led to a decrease in flexural properties. The processing results were found to be in good agreement with predictions of a 1-dimensional model. This study suggests that infusion times are not considerably affected by the observed changes in surface energy. However, other implications of the treatments such as an increase in fibrillation can alter the infusion times significantly.

     

Solar photocatalytic decolorization of methylene blue in water

In this study, a photocatalytic decolorization system equipped with immobilized TiO2 and illuminated by solar light was used to remove the color of wastewater. To examine the decoloring efficiency of this system, photocatalytic decolorization of an organic dye such as methylene blue was studied as an example. The effects of light source, pH, as well as the initial concentration of dye were also investigated. It was observed that the solution of methylene blue could be almost completely decolorized by the solar light/TiO2 film process while there was about 50% color remaining with solar irradiation only. In addition, it was found that the decoloring efficiency of solution was higher with solar light irradiation than with artificial UV light irradiation, even though the artificial UV light source supplied higher UV intensity at 254 nm. The color removal rate of methylene blue with solar light irradiation was almost twice that of artificial UV light irradiation. This phenomena was mainly attributed to that some visible light range of solar light was useful for exciting the methylene blue molecules adsorbed on TiO2 film, leading to a photosensitization process undergoing and decoloring efficiency promoted. This solar-assisted photocatalytic device showed potential application for decoloring organic dyes in wastewater.     

Photocatalytic oxidation of pesticide rinsate

Pesticide rinsate has been considered as one of the major threats for the environment. In this study, photocatalysts such as TiO2 and O3 were used to promote the efficiency of direct UV photolysis to prevent such wastewater pollution. Carbofuran (a carbamate pesticide) and mevinphos (an organophosphate pesticide) with a concentration of 100 mg/L were selected as the test pesticide rinsates. Parent pesticide compound, COD, and microtoxicity analysis were employed to investigate the effect of photocatalyst on the degradation efficiency of pesticide in rinsate. It was found that the photocatalytic oxidation process (UV/O3, UV/TiO2) showed much higher COD removal and microtoxicity reduction efficiency for pesticide rinsate than did direct UV photolysis under the imposed conditions, suggesting that photocatalytic oxidation processes such as UV/O3 and UV/TiO2 could be a better alternative to treat pesticide rinsate. In addition, it was noted that increasing the initial pH of mevinphos rinsate to a basic level was required to reach higher COD removal efficiency and positive microtoxicity reduction efficiency while it was not necessary for the treatment of carbofuran rinsate.     

Kinetics of benzene adsorption onto activated carbon

An activated carbon bed adsorption process is influenced by the adsorbents' characteristics, volatile organic compound (VOC) characteristics, and process conditions. In the literatures, the adsorption processes of the adsorbents and VOCs were usually considered to be in equilibrium. In this study, the VOC adsorption processes by activated carbon were considered to be a kinetic process, i.e. they are not in equilibrium. Then, isothermal adsorption curves and a small column experiment were simulated.