Reduced Soil Macropores and Forest Cover Reduce Warm‐Season Baseflow below Ecological Thresholds in the Upper Delaware River Basin

We examined the impacts of changes in land cover and soil conditions on the flow regime of the upper Delaware River Basin using the Water Availability Tool for Environmental Resources. We simulated flows for two periods, c. 1600 and 1940, at three sites using the same temperature and precipitation conditions: the East Branch, West Branch, and mainstem Delaware River at Callicoon, New York. The 1600 period represented pristine forest and soils. The 1940 period included reduced forest cover, increased agriculture, and degraded soils with reduced soil macropore fractions. A model‐sensitivity test examined the impact of soil macropore and land cover change separately. We assessed changes in flow regimes between the 1600 and 1940 periods using a variety of flow statistics, including established ecological limits of hydrologic alteration (ELOHA) thresholds. Reduced forest soil macropore fraction significantly reduced summer and fall baseflows. The 1940 period had significantly lower Q50 flows (50% exceedance) than the 1600 period, as well as summer and fall Q90 and Q75–Q90 flows below the ELOHA thresholds. The one‐ to seven‐day minimum flows were also lower for the 1940 period, by 17% on the mainstem. 1940 flows were 6% more likely than the 1600 period to fall below the low‐flow threshold for federally endangered dwarf wedgemussel (Alasmidonta heterodon) habitat. In contrast, the 1940 period had higher flows than the 1600 period from late fall to early winter.     

Ex-situ field application of electrokinetics for remediation of shooting-range soil

Electrokinetic process for remediation of a shooting-range site was evaluated in this study. By field operation for 100 days, the newly designed electrokinetic system was evaluated for process stability, performance, and efficiency. The field site of this study was an abandoned military shooting range located in the Civilian Control Line of South Korea. The target area, only, was heavily contaminated by Pb and Cu to a depth of 0.5 m. After dry-sieving of the field soil to separate particulate Pb, two cells in a hexagonal (two-dimensional) arrangement, including ten anodes outside the cell and two cathodes in the middle, were prepared. The pH of each electrolyte was adjusted by use of concentrated HNO₃, resulting in acid-enhanced electrokinetics. The monitoring results indicated that overall removal of heavy metals (Pb, Cu) was achieved, and that both heavy metals were removed from outside the cell. The average final efficiency of removal of Pb and Cu was 39.5 ± 35 and 63.8 ± 12%, respectively. Although the feasibility of this system was confirmed, for commercialization of the process confirmed drawbacks must be improved by further study.

     

Extracellular antimutagenic activities of selected probiotic Bifidobacterium and Lactobacillus spp. as a function of growth phase

The capabilities of selected strains from genera Lactobacillus and Bifidobacterium to produce extracellular bioactive compounds with antimutagenic properties against benzo[a]pyrene (BaP) and sodium azide (SA) were tested as a function of growth phase. The bacterial supernatants from exponential and stationary phases were characterized with different patterns of antimutagenic activity against the two mutagens. All lactobacilli exhibited either no effect or low antimutagenicity against BaP during exponential growth. Higher antimutagenic activities of lactobacilli supernatants were observed in the stationary phase against SA as well. An exception was Lactobacillus sakei 23K which expressed a relatively low percent of inhibition of mutagenesis (PI = 28.14 ± 7.41) in the exponential phase and no antimutagenic activity in the stationary phase. Of the bifidobacteria, only Bifidobacterium adoleascentis ATCC 15703 exhibited higher antimutagenecity against BaP in the exponential phase. The same bacterial supernatants however, did not possess any antimutagenicity against SA in either the exponential or stationary phases. B. bifidum ATCC 11863 did not express any significant differences in its activity against either BaP or SA in the exponential or stationary phases. Only B. breve ATCC 15700 expressed a high antimutagenic effect against SA in the stationary phase but exhibited no effect during exponential growth. Overall, bacterial antimutagenic responses were associated with growth phase and type of mutagen.     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Study on the initial velocity distribution of exhaled air from coughing and speaking

Increasing concerns about the spread of airborne pathogens such as severe acute respiratory syndrome (SARS) and novel swine-origin influenza A (H1N1) have attracted public attention to bioaerosols and protection against them. The airborne pathogens are likely to be expelled from coughing or speaking, so the physical data of the exhaled particles plays a key role in analyzing the pathway of airborne viruses. The objective of this study was to analyze the initial velocity and the angle of the exhaled airflow from coughing and speaking of 17 males and 9 females using Particle Image Velocimetry (PIV) and acrylic indoor chamber. The results showed that the average initial coughing velocity was 15.3 m/s for the males and 10.6 m/s for the females, while the average initial speaking velocity was 4.07 m/s and 2.31 m/s respectively. The angle of the exhaled air from coughing was around 38° for the males and 32° for the females, while that of the exhaled air from speaking was around 49° and 78° respectively. Also, the linear relation between the tested subject’s height and their coughing and speaking velocity was shown in this study.     

Characteristics of products and PCDD/DF emissions from a pyrolysis process of urethane/styrofoam waste from electrical home appliances

A plastic fraction consisting mainly of polyurethane/styrofoam waste is generated after separating valuable spare parts and metals from used electrical home appliances. In Korea, such waste is currently incinerated in cement kilns or is landfilled. However, owing to its high volatile matter content, conversion into gaseous or liquid pyrolysis products is a preferable alternative. A pyrolysis process of polyurethane and styrofoam waste from electrical home appliances was evaluated by characterizing the products generated at 500°–800°C. The para meters determined were the yields of gas, oil, and char; the characteristics of the remaining char; and the con centration of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzo-furans in the product gas. As expected, the char yield decreased at higher temperatures, whereas gas and oil yields showed increasing tendency. The oil products could be used as storable fuels with a calorific value of 6000–8000 kcal/kg. Fine pores were observed in the char. The adsorption and decolorizing ability of the char were almost the same as those of activated carbon, so that pyrolysis char has potential for use as a sorbent. Further feasibility studies will be needed before utilizing pyrolysis technology to recover either fuels or usable products from polyurethane/styrofoam waste.     

Effect of the Mn oxidation state and lattice oxygen in Mn-based TiO2 catalysts on the low-temperature selective catalytic reduction of NO by NH3

TiO₂-supported manganese oxide catalysts formed using different calcination temperatures were prepared by using the wet-impregnation method and were investigated for their activity in the low-temperature selective catalytic reduction (SCR) of NO by NH₃ with respect to the Mn valence and lattice oxygen behavior. The surface and bulk properties of these catalysts were examined using Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), temperature-programmed reduction (TPR), and temperature-programmed desorption (TPD). Catalysts prepared using lower calcination temperatures, which contained Mn⁴⁺, displayed high SCR activity at low temperatures and possessed several acid sites and active oxygen. The TPD analysis determined that the Brönsted and Lewis acid sites in the Mn/TiO₂ catalysts were important for the low-temperature SCR at 80～160 and 200～350 °C, respectively. In addition, the available lattice oxygen was important for attaining high NO to NO₂ oxidation at low temperatures.

Implications: Recently, various Mn catalysts have been evaluated as SCR catalysts. However, there have been no studies on the relationship of adsorption and desorption properties and behavior of lattice oxygen according to the valence state for manganese oxides (MnO_x). Therefore, in this study, the catalysts were prepared by the wet-impregnation method at different calcination temperatures in order to show the difference of manganese oxidation state. These catalysts were then characterized using various physicochemical techniques, including BET, XRD, TPR, and TPD, to understand the structure, oxidation state, redox properties, and adsorption and desorption properties of the Mn/TiO₂ catalysts.     

Modeling uptake kinetics of cadmium by field-grown lettuce

Cadmium uptake by field grown Romaine lettuce treated with P-fertilizers of different Cd levels was investigated over an entire growing season. Results indicated that the rate of Cd uptake at a given time of the season can be satisfactorily described by the Michaelis-Menten kinetics, that is, plant uptake increases as the Cd concentration in soil solution increases, and it gradually approaches a saturation level. However, the rate constant of the Michaelis-Menten kinetics changes over the growing season. Under a given soil Cd level, the cadmium content in plant tissue decreases exponentially with time. To account for the dynamic nature of Cd uptake, a kinetic model integrating the time factor was developed to simulate Cd plant uptake over the growing season: C Plant=C Solution.PUF max.exp[-b.t], where C Plant and C Solution refer to the Cd content in plant tissue and soil solution, respectively, PUF max and b are kinetic constants.