Economic and health benefits of the co-reduction of air pollutants and greenhouse gases

This study examines the monetary value of social costs—private costs and negative externalities—that could be avoided by energy conservation actions. A novel Air Resource Co-Benefits (ARCoB) model has been developed in this study to assess the comprehensive social benefits of greenhouse gas GHG mitigation policy. The rollback model is used to estimate changes in air pollutant concentrations attributed to the emission reductions. Change in ozone concentration is converted from non-methane hydrocarbons based on the maximum ozone increment reactivity. In addition to saved medical expenditure, years of potential life lost (YPLL) is estimated based on the exposure-response coefficients for mortality and is calculated with abridged life table. Two cases of energy efficiency improvement in different scales are analyzed to estimate the annual co-benefits of abatements of air pollutants and greenhouse gas in 2009: 1) the energy intensity reduction in the industrial sector and 2) energy saving at Taipei Taiwan City Hall. Results indicate the saved energy cost accounted for 66 % and 70 % in the first and second case, respectively, and was a major part of the total benefit from energy conservation. The saved air pollution fee was 7.8–8.5 times lower than the averted health cost of medical expenditure, which was US$10.34 million in the first case, in which there were also averted YPLL of 3,478 person-years or averted deaths of 311 persons per year.     

Pore Structure Effects on Ca-Based Sorbent Sulfation Capacity at Medium Temperatures: Activated Carbon as Sorbent/Catalyst Support

Abstract

The reaction between three different Ca-based sorbents and SO₂ were studied in a medium temperature range (473–773 K). The largest SO₂ capture was found with Ca(OH)₂ at 773 K, 126.31 mg SO₂?g Ca(OH)₂ ^?1, and the influence of SO₂ concentration on the sorbent utilization was observed. Investigations of the internal porous structure of Ca-based sorbents showed that the initial reaction rate was controlled by the surface area, and once the sul-fated products were produced, pore structure dominated. To increase the surface area of Ca-based sorbents available to interact with and retain SO₂, one kind of CaO/activated carbon (AC) sorbent/catalyst was prepared to study the effect of AC on the dispersion of Ca-based materials. The results indicated that the Ca-based material dispersed on high-surface-area AC had more capacities for SO₂ than unsupported Ca-based sorbents. The initial reaction rates of the reaction between SO₂ and Ca-based sorbents and the prepared CaO/AC sorbents/cata-lysts were measured. Results showed that the reaction rate apparently increased with the presence of AC. It was concluded that CaO/AC was the active material in the des-ulfurization reaction. AC acting as the support can play a role to supply O₂ to increase the affinity to SO₂. Moreover, when AC is acting as a support, the surface oxygen functional group formed on the surface of AC can serve as a new site for SO₂ adsorption.     

Observation of SO2 dry deposition velocity at a high elevation flux tower over an evergreen broadleaf forest in Central Taiwan

A 60-m flux tower was built on a 2100 m mountain for the measurement of the air pollutant concentration and the evaluation of dry deposition velocity in Central Taiwan. The tower was constructed in an evergreen broadleaf forest, which is the dominant species of forest in the world. Multiple-level SO₂ concentrations and meteorological variables at the site were measured from February to April 2008. The results showed that the mean dry deposition velocities of SO₂ were 0.61 cm s^?1 during daytime and 0.27 cm s^?1 during nighttime. From the comparison of the monthly data, a tendency was observed that the dry deposition velocity increases with LAI and solar radiation. Furthermore, it was observed that the deposition velocity was larger over wet canopy than over dry canopy, and that higher deposition velocities in the wet season were mainly caused by non-stomatal uptake of wet canopy. Over wet canopy, the mean dry deposition velocities of SO₂ were estimated to be 0.83 cm s^?1 during daytime and 0.47 cm s^?1 during nighttime; and 0.44 cm s^?1 during daytime and 0.19 cm s^?1 during nighttime over dry canopy. There is good agreement between the results of this study and those in other studies and the predictions of Zhang et al. (2003a). The medians (geometric means) of derived r_c during daytime are 233 (266) m s^?1 over dry canopy and 147 (146) m s^?1 over wet canopy. It was found that solar radiation is the critical important meteorological variable determining stomatal resistance during daytime. For non-stomatal resistance, clear dependencies were observed on the friction velocity and relative humidity.     

Characterization of eco-cement paste produced from waste sludges

In this study, marble sludge, sewage sludge, drinking water treatment plant sludge, and basic oxygen furnace sludge were used as replacements for limestone, sand, clay, and iron slag, respectively, as the raw materials for the production of cement in order to produce eco-cement. It was found that it is feasible to use marble sludge to replace up to 50% of the limestone and also that other materials can serve as total replacements for the raw materials typically used in the production of cement. The major components of Portland cement were all found in eco-cement clinkers. The eco-cement was confirmed to produce calcium hydroxide and calcium silicate hydrates during the hydration process, increasing densification with the curing age. The compressive strength (S_c) and microstructural evaluations conducted at 28 d revealed the usefulness of eco-cement. It was observed that the S_c data correlated linearly with the pore volume (P) data at 28 d. The proposed model equation could be represented as S_c = 178-461P (correlation coefficient, R² = 0.96). Two parameters, the large capillary pore volume and the medium capillary pore volume, were evaluated using multiple regression analysis.     

Stabilization of residues obtained from the treatment of laboratory waste: Part 2--transformation of plasma vitrified slag into composites

The Sustainable Environment Research Center of National Cheng Kung University in Taiwan has set up a treatment plant to dispose of laboratory waste. In the treatment process, the residue from the incineration system and the physical and chemical system is vitrified by a plasma melting system. Part 1 of this study described the treatment path of metals during vitrification. In Part 2, plasma vitrified slag is reused by using a molding technology. Unsaturated polyester resin and glass fiber were used as the molding material and additive, respectively, in the molding process. With an appropriate mixing ratio of unsaturated polyester resin, glass fiber, and slag, the physical properties of composites improved, and the ultimate tensile strength reached 17.6 MPa. However, an excess amount of slag reduced the strength and even retarded the production of composites. Differential thermal analysis and the water bathing test results show that the composite decomposed at 80 degrees C and that it vaporized at 187 degrees C. Although the unsaturated polyester resin decomposed, the metal encapsulated in the slag did not leach out. The results show that the reuse of slag using molding technology should be taken into consideration.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Assessment of heavy metal bioavailability in contaminated sediments and soils using green fluorescent protein-based bacterial biosensors

A green fluorescent protein (GFP)-based bacterial biosensor Escherichia coli DH5alpha (pVLCD1) was developed based on the expression of gfp under the control of the cad promoter and the cadC gene of Staphylococcus aureus plasmid pI258. DH5alpha (pVLCD1) mainly responded to Cd(II), Pb(II), and Sb(III), the lowest detectable concentrations being 0.1 nmol L(-1), 10 nmol L(-1), and 0.1 nmol L(-1), respectively, with 2h exposure. The biosensor was field-tested to measure the relative bioavailability of the heavy metals in contaminated sediments and soil samples. The results showed that the majority of heavy metals remained adsorbed to soil particles: Cd(II)/Pb(II) was only partially available to the biosensor in soil-water extracts. Our results demonstrate that the GFP-based bacterial biosensor is useful and applicable in determining the bioavailability of heavy metals with high sensitivity in contaminated sediment and soil samples and suggests a potential for its inexpensive application in environmentally relevant sample tests.     

Prenatal diagnosis of Hb H disease due to compound heterozygosity for South-East Asian deletion and Hb constant spring by polymerase chain reaction

A pregnant woman has two children affected by moderately severe Hb H disease due to compound heterozygosity of South-east Asian deletion and Constant Spring mutation. In her third pregnancy, transabdominal chorionic villus sampling was performed at the tenth gestational week to obtain fetal DNA. The polymerase chain reaction was used for detection of both the South-east Asian deletion and the Constant Spring mutation. Hb H disease was diagnosed in the fetus. After genetic counselling, the couple elected to have the pregnancy terminated.     

Hydrogen sulfide gas treatment by a chemical-biological process: chemical absorption and biological oxidation steps

In order to remove high concentrations of hydrogen sulfide (H2S) gas from anaerobic wastewater treatments in livestock farming, a novel process was evaluated for H2S gas abatement involving the combination of chemical absorption and biological oxidation processes. In this study, the extensive experiments evaluating the removal efficiency, capacity, and removal characteristics of H2S gas by the chemical absorption reactor were conducted in a continuous operation. In addition, the effects of initial Fe2+ concentrations, pH, and glucose concentrations on Fe2+ oxidation by Thiobacillus ferrooxidans CP9 were also examined. The results showed that the chemical process exhibited high removal efficiencies with H2S concentrations up to 300 ppm, and nearly no acclimation time was required. The limitation of mass-transfer was verified as the rate-determining step in the chemical reaction through model validation. The Fe2+ production rate was clearly affected by the inlet gas concentration as well as flow rate and a prediction equation of ferrous production was established. The optimal operating conditions for the biological oxidation process were below pH 2.3 and 35 degrees C in which more than 90% Fe3+ formation ratio was achieved. Interestingly, the optimal glucose concentration in the medium was 0.1%, which favored Fe2+ oxidation and the growth of T. ferrooxidans CP9.