Responses of Hybrid Poplar Trees to Sulfur Dioxide Fumigation

This paper verifies the presence of significant interclonal variation in the tolerance of hybrid poplar (Populus deltoides Bartr. cv. Angulata × P. trichocarpa Torr. and Gray) to sulfur dioxide fumigation. Rooted stem cuttings of four hybrid poplar clones were exposed to 5 ppm sulfur dioxide for 0, 3, 6, 9, or 12 hours in controlled environment chambers. Multivariate analyses were made from the shoot growth measurements recorded for 4 weeks before and after fumigation and on the data of foliar injury induced by sulfur dioxide. The following factors were statistically significant in determining growth response and foliar injury: (1) genotype; (2) duration of treatment; and (3) interaction between genotype and hours of fumigation. All partial correlations between foliar injury and subsequent shoot growth were positive and significant. Sufficient genetic variation appears to exist in this Populus hybrid to encourage selection of clones tolerant to short-term exposures of high levels of sulfur dioxide.     

Report from the First International Symposium

The First International Symposium on Acid Precipitation and the Forest Ecosystem sponsored by the United States Department of Agriculture, Forest Service, Northeastern Forest Experiment Station, and by the Atmospheric Sciences Program of The Ohio State University was held in Columbus, Ohio, May 12-15, 1975. Approximately 300 people from 12 countries attended the Symposium.     

A high pressure liquid chromatographic method for the analysis of zearalenone in chicken blood

Abstract

A high pressure liquid chromatographic (HPLC) method is described to determine zearalenone in chicken blood. Samples are extracted with acetonitrile, followed by a hexane cleanup procedure and extracted further with ethyl acetate. The analysis of zearalenone is by HPLC using a reverse phase radial compression separation system, an ultraviolet absorbance detector and a mobile phase of acetonitrile‐water 60:40 (v/v). Recoveries of zearalenone in blood at levels of 50–200 ng/ml are in the range of 66.8–72.6%.     

Pulse Nebulization in Pneumatic Devices

Aerosols of a physiological salt solution and aqueous solutions of salbutamol, sodium cromoglicate, and dornase aifa were generated in a pneumatic nebulizer and analyzed in a system with controlled humidity of air as a carrier gas. Mass distribution of aerosol particles and yield of generation for pulse nebulization were measured. Pulsation of generation was realized with an attachment maintained by a computer program. Opening times of the valve were in the range 50-800 ms. The results indicate the possibility of improving aerosol particle delivery to the lung using a pulse generation system.     

Henry's law constants and mass transfer coefficients for methyl bromide and 1,3-dichloropropene applied to Florida sandy field soil

Methyl bromide, a pre-emergent soil fumigant, is scheduled to be phased out in the US by 2005, with exceptions for critical use. Comparison of some of the physical constants related to distribution and retention for methyl bromide (MBr) to other fumigants yields a useful quantification of possible alternatives. In this study, the atmospheric and subsurface dissipation of methyl bromide as well as (Z)- and (E)-1,3-dichloropropene (1,3-D) isomers in Telone II were examined. The Henry's law constants of the three chemicals at soil temperature and their mass transfer coefficients for movement through an agricultural mulch of UV-resistant, high-density polyethylene (PE) were evaluated using field data. At the soil temperature of 16.4 degrees C, calculated Henry's law constant gave a fumigant ranking of MBr (0.21)>(Z)-1,3-D (0.041)>(E)-1,3-D (0.027). Since rapid subsurface distribution of a fumigant is highly dependent on the amount in the gas phase, the greater value for Henry's law constant implies faster distribution throughout the soil. After distribution through the soil, retention of the fumigant becomes imperative. Calculation of the fumigant's mass transfer coefficients through PE from field data gave a ranking of the three chemicals: MBr (1.08 cm/h)<(E)-1,3-D (3.25 cm/h)<(Z)-1,3-D (4.13 cm/h). With mass transfer coefficients of this magnitude, it was concluded that PE film was an inadequate barrier for retaining these fumigants in an agricultural setting.     

Genetic polymorphisms in CYP1A1 and GSTM1 predispose humans to PCBs/PCDFs-induced skin lesions

INTRODUCTION: Polychlorinated biphenyls (PCBs) and dibenzofurans (PCDFs) are ubiquitous persistent pollutants in humans. Whether people with different genotypes are with different susceptibility to these chemicals are unknown. In a group of people highly exposed to PCBs/PCDFs, we tested the hypothesis that genotypic polymorphisms affected susceptibility for development of skin manifestations. METHODS: In 1979, approximately 2000 people in central Taiwan ingested cooking oil contaminated with PCBs/PCDFs. Skin disorder such as chloracne, abnormal nail, hyperkeratosis and skin allergy were found in PCBs/PCDFs exposed group. We recruited exposed and community background exposure subjects for blood testing and telephone-interview. Single nucleotide polymorphisms, AhR Arg554Lys, CYP1A1 Ile462Val, CYP1A1 T6235C, and GSTM1/T1 deletion, were determined. Occurrence of skin manifestations was compared among people with different genotypes while stratified by PCB exposure levels by logistic regression. RESULTS: Data on exposure, medical history, and genotypes were obtained from 393 exposed and 181 background exposure groups. Skin manifestations including chloracne, allergy, abnormal nail, and hyperkeratosis were more prevalent in exposed people in a dose-related manner. Among highly exposed individuals, combined CYP1A1-MspI mutant genotype and GSTM1-null genotype were associated with increased risk of chloracne (odds ratio 2.8, 95% confidence interval 1.1-7.6). Among intermediately exposed individuals, GSTM1 null genotype was associated with skin allergy. AhR Arg554Lys genotype and GSTT1 null genotype were not related to susceptibility to skin manifestations in PCB/PCDF-exposed population. CONCLUSION: CYP1A1 and GSTM1 genotypic polymorphisms might be related to the susceptibility to PCB/PCDF-induced skin manifestations.     

A/O MBR处理生活污水效率与菌群多样性的关系

采用缺氧/好氧膜生物反应器（A/O MBR）工艺处理生活污水,试运行了5种不同的工况以确定最佳工艺参数,利用变性凝胶梯度电泳（DGGE）技术研究缺氧池和好氧池（MBR）中细菌群落结构,分析出水水质与细菌种群多样性的关系.结果表明A/O MBR在水力停留时间（HRT）为12 h,污泥停留时间（SRT）为10 d,硝化液回流比为300%,污泥回流比为100%的条件下,对COD、氨氮、总氮有稳定良好的去除,平均去除率分别为96.4%、99.1%、75.8%;系统运行过程中,缺氧池和好氧池中菌群结构发生较大变化,同一工况下两池菌群的相似性通常大于50%,但缺氧池菌群多样性随工况变换而波动较大,好氧池菌群多样性随运行时间而逐渐丰富;缺氧池菌群多样性指数与反硝化效率成正相关关系.     

Coral cavity sponges depend on reef-derived food resources: stable isotope and fatty acid constraints

The diet of cavity sponges on the narrow fringing reefs of Curaçao, Caribbean was studied. The origin and resources of the bulk food of these sponges, i.e., dissolved organic matter (DOM), were identified using stable carbon and nitrogen isotopes and fatty acid biomarkers. We found that phytoplankton and its derived DOM from the adjacent open sea and from reef overlying water is not the main source of food for most of the sponges examined nor is bacterioplankton. Interestingly, dual stable isotope signatures (δ¹³C_org, δ¹⁵N_org) and fatty acid biomarkers appoint coral mucus and organic matter derived from crustose coralline algae (CCA) as probable food sources for encrusting sponges. Mucus-derived DOM may contribute up to 66% to the diet of examined sponges based on results of dual isotope mixing model analysis. The contribution of CCA (as purported representative for benthic algae) was smaller with values up to 31%. Together, mucus- and CCA-derived substrates contributed for 48–73% to the diet of sponges. The presence of the exogenous fatty acid 20:4ω6 in sponges, which is abundant in coral mucus of Madracis mirabilis and in CCA, highlights these reef-derived resources as sources of nutrition for DOM feeding cavity sponges. The relatively high concentrations of exogenous 20:4ω6 in all sponges examined supports our hypothesis that the bulk of the food of the cavity sponge community is reef-derived. Our results imply that cavity sponges play an important role in conserving food and energy produced within the reef.     

A comparison of PCDD/PCDFs exposure in infants via formula milk or breast milk feeding

Food is the major source for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) accumulation in human body. In infant period, breast milk and formula milk are the major food sources. Congener-specific analyses of 17 PCDD/PCDFs were performed on 10 brands of formula milk samples which were milk-based and 37 breast milk samples collected from women living in southern Taiwan. The levels of 17 PCDD/PCDFs in 10 formula milk samples ranged from 0.468 to 0.962 pg WHO-TEQ/g lipid, with a mean value of 0.713+/-0.163 pg WHO-TEQ/g lipid. For the 37 breast milk samples, their PCDD/PCDF levels were 14.7+/-9.36 pg WHO-TEQ/g lipid, with a range between 4.21 and 52.8 pg WHO-TEQ/g lipid. At 12th month of age for infants, average daily intakes (ADI) of PCDD/PCDFs were 2.1 pg WHO-TEQ/kg/day for the formula-feeding infants, and 13 pg WHO-TEQ/kg/day for the breast-feeding infants. The present data may provide useful information for risk-benefit evaluation of formula- and breast-feeding.     

Field characterization of external grease abatement devices

This study characterized some of the physical and chemical features of large outside field grease abatement devices (GADs). 24-hour measurements of several food service establishments' (FSEs') influent GAD flowrates indicated highly intermittent conditions with hydraulic retention times (HRTs) that exceeded the common recommendation (30 minutes) by two to five times. Investigation into the chemical characteristics of GADs indicated highly variable influent and effluent fat, oil, and grease (FOG) concentrations. Low pH and dissolved oxygen values were measured throughout the GAD, indicating the likely occurrence of anaerobic microbial processes. Detailed spatial and temporal observations of the accumulation of FOG and food solids were also discussed. Though the FOG layer remained relatively constant for all GAD configurations investigated, results indicated that commonly-used GAD configurations with a straight submerged inlet tee or no-inlet tee configuration may result in the transport of food solids into the second compartment. The present research showed increased accumulation of food solids in the first compartment with a retro-fit flow distributive inlet. This retro-fit displays promise for potentially improving the separation characteristics of existing GADs.