Use of recycled fine aggregate in concretes with durable requirements

The use of construction waste materials as aggregates for concrete production is highly attractive compared to the use of non-renewable natural resources, promoting environmental protection and allowing the development of a new raw material. Several countries have recommendations for the use of recycled coarse aggregate in structural concrete, whereas the use of the fine fraction is limited because it may produce significant changes in some properties of concrete. However, during the last decade the use of recycled fine aggregates (RFA) has achieved a great international interest, mainly because of economic implications related to the shortage of natural sands suitable for the production of concrete, besides to allow an integral use of this type of waste. In this study, the durable behaviour of structural concretes made with different percentage of RFA (0%, 20%, and 30%) is evaluated. Different properties related to the durability of concretes such as absorption, sorptivity, water penetration under pressure, and carbonation are determined. In addition, the results of compressive strength, static modulus of elasticity and drying shrinkage are presented. The obtained results indicate that the recycled concretes have a suitable resistant and durable behaviour, according to the limits indicated by different international codes for structural concrete.     

Effects of ammonia from livestock farming on lichen photosynthesis

This study investigated if atmospheric ammonia (NH₃) pollution around a sheep farm influences the photosynthetic performance of the lichens Evernia prunastri and Pseudevernia furfuracea. Thalli of both species were transplanted for up to 30 days in a semi-arid region (Crete, Greece), at sites with concentrations of atmospheric ammonia of ca. 60 μg/m³ (at a sheep farm), ca. 15 μg/m³ (60 m from the sheep farm) and ca. 2 μg/m³ (a remote area 5 km away). Lichen photosynthesis was analysed by the chlorophyll a fluorescence emission to identify targets of ammonia pollution. The results indicated that the photosystem II of the two lichens exposed to NH₃ is susceptible to this pollutant in the gas-phase. The parameter PI_ABS, a global index of photosynthetic performance that combines in a single expression the three functional steps of the photosynthetic activity (light absorption, excitation energy trapping, and conversion of excitation energy to electron transport) was much more sensitive to NH₃ than the F_V/F_M ratio, one of the most commonly used stress indicators.     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Socioeconomic development and vulnerability to land degradation in Italy

In recent years, the surface area affected by land degradation (LD) has significantly increased in southern European regions where the socioeconomic development has been proposed as a basic factor underlying the degree of vulnerability to LD. This paper investigates the correlation between several socioeconomic indicators and the level of vulnerability to LD in Italy, expressed as changes (1990–2000) in a composite index of land vulnerability (ΔLVI). The analysis was carried out over 784 local districts. The impact of per capita value added, agricultural intensity, industrial and tourism concentration, and urban growth was separately tested on ΔLVI. Results indicate that a lower district value added, crop intensification, irrigation, and the level of land vulnerability to degradation are strongly associated with the increasing level of land vulnerability over time, highlighting the role of the socioeconomic development as a main process underlying LD. In this framework, spatially equitable sustainable development may represent the effective strategy to mitigate the detrimental effects of economic growth and regional disparities on Mediterranean LD.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Short-term seasonal variability in Be wet deposition in a semiarid ecosystem of central Argentina

The ⁷Be wet deposition has been intensively investigated in a semiarid region at San Luis Province, Argentina. From November 2006 to May 2008, the ⁷Be content in rainwater was determined in 58 individual rain events, randomly comprising more than 50% of all individual precipitations at the sampling period. ⁷Be activity concentration in rainwater ranged from 0.7 ± 0.3 Bq l⁻¹ to 3.2 ± 0.7 Bq l⁻¹, with a mean value of 1.7 Bq l⁻¹ (sd = 0.53 Bq l⁻¹). No relationship was found between ⁷Be content in rainwater and (a) rainfall amount, (b) precipitation intensity and (c) elapsed time between events. ⁷Be ground deposition was found to be well correlated with rainfall amount (R = 0.92). For the precipitation events considered, the ⁷Be depositional fluxes ranged from 1.1 to 120 Bq m⁻², with a mean value of 32.7 Bq m⁻² (sd = 29.9 Bq m⁻²). The annual depositional flux was estimated at 1140 ± 120 Bq m⁻² y⁻¹. Assuming the same monthly deposition pattern and that the ⁷Be content in soil decreases only through radioactive decay, the seasonal variation of ⁷Be areal activity density in soil was estimated. Results of this investigation may contribute to a valuable characterization of ⁷Be input in the explored semiarid ecosystem and its potential use as tracer of environmental processes.     

三元复合驱采出水中悬浮固体的控制方法

采用向三元复合驱采出水中加入水质稳定剂的方法有效降低采出水中悬浮固体的质量浓度。实验结果表明,将100 g采出水依次经滤纸和孔径为0.45μm的醋酸纤维素膜过滤后,加入1.0 g WSBL-3型水质稳定剂,混合均匀后置于80℃的水浴中静置4 h,取出后再置于40℃的水浴中静置5 min,由此可将采出水中的悬浮固体质量浓度由107 mg/L降至2 mg/L。     

激发剂作用下的盐石膏废渣的水化过程

运用Kondo模型,研究了在激发剂硫酸钠作用下盐石膏废渣的水化过程.盐石膏废渣的水化过程分为3个阶段,第1、第3阶段受扩散作用控制;第2阶段受相边界反应控制.分别研究了激发剂溶液浓度和温度对相边界反应阶段水化速率的影响,结果表明,在0—0.60 mol.L-1范围内,增大激发剂溶液浓度可使水化速率常数k增大,在12℃≤...     

气象因子对臭氧的影响及其在空气质量预报中的应用

为提高重庆市臭氧(O_3)预报准确率,利用2013—2015年5—10月O_3监测数据和气象数据,通过主成分分析、逐步回归分析等方法,确定了影响重庆O_3浓度的主要气象因素为最高温度、温差、太阳辐射、降水量、相对湿度、水气压和压差;通过基于O_3污染水平相似的主要气象控制因子筛选和最优组合的预报结果优化方法,提高了O_3预报准确率,使2016年5—8月O_3的AQI类别预报准确率由57.7%增至72.4%,O_3超标的预报准确率由38%增至46%。     

Cleaning painted surfaces: evaluation of leaching phenomenon induced by solvents applied for the removal of gel residues

Cleaning is one of the most important, delicate, and at the same time controversial processes in the conservation treatment of paintings. Although a strict definition of cleaning would be the removal of dirt, grime, or other accretions (surface cleaning), in the conservation field, cleaning is used in the broader meaning to include thinning/removing altered or “unwanted layers” of materials without damaging or altering the physicochemical properties of the surfaces to be preserved. The cleaning of unvarnished paintings is one of the most critical issues that are currently discussed. Several studies exist regarding different cleaning tools, such as gels, soaps, enzymes, ionic liquids, and foams, as well as various dry methods and lasers, but only a few have been performed on the risk associated with the use of water and organic solvents for the cleaning treatments in relation to the original paint binder. The aim of the study is to verify analytically the behavior of water gelling agents during cleaning treatments and the interaction of the following elements: water or organic solvents applied for the removal of gel residues with the original lipid paint binder. For this purpose, the study was conducted on a fragment of canvas painting (sixteenth to seventeenth century) of Soprintendenza per i Beni Storici, Artistici ed Etnoantropologici del Friuli Venezia Giulia (Superintendence for the Historical, Artistic and Ethno-anthropological Heritage of Friuli Venezia Giulia), Udine by means of Fourier transform infrared spectroscopy, gas chromatography/mass spectrometry, and scanning electron microscopy.